Clicking While Turning and Turning the Rear Tires Forward (Solved) So I've had some annoying clicking when driving and turning, also if I rotate the rear tires forward by hand. I searched and found where someone posted the same thing and it was mentioned that under power the center shafts should pull out on the pinion gears. I don't see how this is even possible with there being a sliding shaft in the middle. I ended up digging through my old Traxxas parts and found some diff shims. I put one between the center shaft and outer diff bearing on both axles and the clicking is completely gone. |
Re: Clicking While Turning and Turning the Rear Tires Forward (Solved) I thought the same thing but since the Capra has spiral cut gears, it's possible for this (clicking noise) to happen. The shim solved my problem too a couple months back. The good thing about this is this got me to start gathering a collection of shims to have around which has already come in handy. "thumbsup" |
Re: Clicking While Turning and Turning the Rear Tires Forward (Solved) Quote:
|
All times are GMT -6. The time now is 11:51 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com