Bomber Aluminum Panels from Barndog Racing

[Barndog Racing]

Here it is for dpcardoza



Sent from my iPhone using Tapatalk

[dpcardoza]

Now it time to sticker the crap out of em


Sent from my iPhone using Tapatalk

[elRayRay]

Originally Posted by Barndog Racing

Here it is for dpcardoza



Sent from my iPhone using Tapatalk

Turns out, I may need to go this route on my SWB 1.9 Bomber. It looks like the tires are going to rub badly on the lower front corners at even moderate steering angles.

[Barndog Racing]

I can do that when you are ready ElRayRay!

[elRayRay]

Originally Posted by dpcardoza

What's up with the battery tray here? What size battery will fit?

[Barndog Racing]

That is the fire wall piece I make for it too but you don't have to run it.With the sides that delete the battery compartment it shrinks the battery area I was running a 2200 3s that was 4 1/4" I think.

[elRayRay]

Any chance you can get me the largest possible battery dimensions? Can you fit a larger battery without the firewall? I'm trying to go 4s, and I'm already having a hard time finding space for everything.

[Barndog Racing]

With out the firewall you could run a battery length wise (front to back) to get decent size battery in there.

[elRayRay]

Originally Posted by Barndog Racing

With out the firewall you could run a battery length wise (front to back) to get decent size battery in there.

I had considered that but I'm trying to fit a servo winch and an ESC between my inner fenders. Fitting (roughly) 12 lbs of shit in a 10 lb bag. Rx and light controller are getting moved to the fuel cell area. I need to delete the stock Rx box because of the centered front pumpkin. I'm still not sure if I can get both an ESC and a winch on the Wertymade plate...it should be here this week. The Wraith interior further complicates things.

[dpcardoza]

Originally Posted by elRayRay

What's up with the battery tray here? What size battery will fit?

I run these and they fit fine.
https://www.rcjuice.com/lipo-batteri...o-battery.html


Sent from my iPhone using Tapatalk

[Browneye]

Originally Posted by dpcardoza

I run these and they fit fine.
https://www.rcjuice.com/lipo-batteri...o-battery.html


Sent from my iPhone using Tapatalk

Damn, those are a bargain!!!! The protek ones are almost double that.
I better measure my Ascender battery tray....

[Barndog Racing]

Have a great weekend crawling guys all orders are shipped out!

[Barndog Racing]

All orders shipped thank you it is appreciated!

[Barndog Racing]

I hope you guys are having a great weekend crawling or building!
X-long bodies shipped out today thanks for the support guys!

[Barndog Racing]

Bodies from the end of the week shipped today thanks guys!
Enjoy the rest of your Sunday funday!

[GrimmTheTourist]

I have them since weeks, but did not have time to work on the rig.
But, finally the panels are installed and the base colors are done.
Now I can start with the details.



Thanks again for your service! And those panels are just amazing. Great quality, great look.

[durok]

Very nice job with those graphics!

[GrimmTheTourist]

Thanks!
I used oracal foil. Very thin. Time will tell how it will handle the dirt, water etc.
But I don't want to spray paint those nice panels.

[Barndog Racing]

Awesome Grimm! Love the graphics!

[Barndog Racing]

Enjoy your Sunday guys all orders are shipped Thank you!