Go Back   RCCrawler Forums > Scale Rigs Brand Specific Tech > Axial RR10 Bomber
Loading

Notices

Thread: Skid and lower rails fitment issue?

Reply
 
LinkBack Thread Tools Display Modes
Old 01-12-2016, 11:28 AM   #1
I wanna be Dave
 
Join Date: Apr 2015
Location: Roseville, Ca
Posts: 2,506
Default Skid and lower rails fitment issue?

Am I the only one who's having this problem? I can get the back 2 bolts on each side to bolt up no problem but front holes just dont line up. Ive got 2 wraith and one bomber skid and neither match up. Got a replacement lower rails from axial but same problem.
84yoda is offline   Reply With Quote
Sponsored Links
Old 01-12-2016, 11:32 AM   #2
Rock Stacker
 
Join Date: Dec 2015
Location: Yucaipa
Posts: 69
Default Re: Skid and lower rails fitment issue?

I had an issue the first time too, almost felt like I was drilling new holes when I screwed em in.

Now I start with the two front screws by the battery tray, and get them in halfway, then kind of rotate the cage down and to the rear to get the back holes lined up. Then the last two middle screws are easy. Hope that helps.


Sent from my iPhone using Tapatalk
xmikedentx is offline   Reply With Quote
Old 01-12-2016, 09:23 PM   #3
Newbie
 
Join Date: Dec 2014
Location: Canada
Posts: 44
Default Re: Skid and lower rails fitment issue?

Make sure to leave them all loose before trying to start another one
Allows a bit of movement

But I had the same problem too the first time I put it back together
EDDIE THE YETI is offline   Reply With Quote
Old 01-13-2016, 08:21 PM   #4
Pebble Pounder
 
GEISSE-RC's Avatar
 
Join Date: Jan 2014
Location: Chester, WV
Posts: 188
Default Re: Skid and lower rails fitment issue?

Wow guys I'm really surprised to hear this! I had mine apart and had no problems what so ever putting it back together.
I will be taking it apart again soon switching to a super shafty bomb proof transmission with a DMG adaptor plate. I will post an update to let you know if I have any problems. Can't imagin i will because of no problems before.
Regards,
Joe
GEISSE-RC is offline   Reply With Quote
Old 01-13-2016, 09:33 PM   #5
I wanna be Dave
 
Join Date: May 2015
Location: Moving
Posts: 2,580
Default Re: Skid and lower rails fitment issue?

It's not really that bad putting one back together because it's already been broken in. It's building a fresh one that gives a bit more issues. Geisse, look at the holes on the skid when you get it apart. You can see where the original builder had to "walk" the screw into its hole leaving some scarring to one side.
SCREAMER is offline   Reply With Quote
Old 01-13-2016, 10:56 PM   #6
Rock Stacker
 
Join Date: Dec 2015
Location: McKinney
Posts: 94
Default Re: Skid and lower rails fitment issue?

Yep, mine too. I just start them and then tighten, it gets better after you have had it apart and back together oh, say 20 times...
USP45 is offline   Reply With Quote
Reply



Skid and lower rails fitment issue? - Similar Threads
Thread Thread Starter Forum Replies Last Post
STRC rear lockouts fitment issue 1967Typhoon Axial SCX-10 13 09-08-2016 09:25 PM
tss chassis + smoooth skid fitment problem? whitrzac Axial SCX-10 4 03-29-2015 04:51 PM
skid plate/lower link issue tcdawg Axial SCX-10 2 01-26-2013 11:35 AM
Axial bent lower link fitment heefageLA Redcat Crawlers 4 02-14-2012 06:00 AM
Advice on bent lower link fitment on RS10 heefageLA General Crawlers 1 02-13-2012 12:10 PM
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 02:26 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com