Go Back   RCCrawler Forums > Scale Rigs Brand Specific Tech > Axial Brand Scale Rock Crawlers > Axial RR10 Bomber
Loading

Notices

Thread: RR10 IFS Tranny question

Reply
 
LinkBack Thread Tools Display Modes
Old 04-17-2016, 05:57 PM   #1
Pebble Pounder
 
Join Date: Jul 2012
Location: Overton
Posts: 129
Default RR10 IFS Tranny question

Does the B1B IFS kit have room to keep the Stock RR10 Transmission? I don't want the wraith trans just my personal preference.
jeepgod is offline   Reply With Quote
Sponsored Links
Old 04-17-2016, 06:15 PM   #2
RCC Addict
 
Join Date: Jun 2006
Location: IN THE PIT !!
Posts: 1,039
Default Re: RR10 IFS Tranny question

Quote:
Originally Posted by jeepgod View Post
Does the B1B IFS kit have room to keep the Stock RR10 Transmission? I don't want the wraith trans just my personal preference.

so far - yes !
you "must use a Wraith or a SCX long rear out put shaft style trans" with the BIB kit.

the main plate interfears with the bomber stock trans front out put shaft,
& you would have to come up with a way to mount the shifter servo some where - steering servo now sits inside the chassis


i am looking into some way to make the kit work with the stock trans,
but that will be a wile !
the DMG is offline   Reply With Quote
Old 04-18-2016, 08:25 AM   #3
Pebble Pounder
 
Join Date: Dec 2013
Location: Derby Line
Posts: 151
Default Re: RR10 IFS Tranny question

Quote:
Originally Posted by the DMG View Post
so far - yes !
you "must use a Wraith or a SCX long rear out put shaft style trans" with the BIB kit.

the main plate interfears with the bomber stock trans front out put shaft,
& you would have to come up with a way to mount the shifter servo some where - steering servo now sits inside the chassis


i am looking into some way to make the kit work with the stock trans,
but that will be a wile !
Couldn't you just make the plate so if goes under the stock skid plate, so it wouldn't interfere with the stock RR10 transmission? I never had a DMG conversion kit in my hand, I just looked at the picture.

Just my 2 cents...
Breat 1.8T syncro is offline   Reply With Quote
Old 04-18-2016, 08:42 AM   #4
RCC Addict
 
Join Date: Jun 2006
Location: IN THE PIT !!
Posts: 1,039
Default Re: RR10 IFS Tranny question

Quote:
Originally Posted by Breat 1.8T syncro View Post
Couldn't you just make the plate so if goes under the stock skid plate, so it wouldn't interfere with the stock RR10 transmission? I never had a DMG conversion kit in my hand, I just looked at the picture.

Just my 2 cents...
yes that is possible !
but the down fall to that is,
like in the Blue Monkey wrath IFS conversion,
when the alum plate in under the skid i notched that the plate hung up a lot on sharp rocks,
and wanted to try to find a way to avoid having a full alum skid on the bottom of the bomber chassis !
& i have had some thought about doing another IFS plate for people who just live with out the bomber boat anchor transmission in there rig !

Last edited by the DMG; 04-18-2016 at 08:49 AM.
the DMG is offline   Reply With Quote
Old 04-18-2016, 10:13 AM   #5
Pebble Pounder
 
Join Date: Jul 2012
Location: Overton
Posts: 129
Default Re: RR10 IFS Tranny question

I like that the plate is on top of the skid so it doesn't get hung up. The steering servo looks like it has lots of room so could you make a plate to have 2 servos side by side or one on top of another. The shifting servo could possible be micro sized. With out seeing one of these first hand its hard to tell how much the plate is protruding but seems like it could be trimmed and a grove ground out for drive shaft clearance. I really want a low gear for more of a controlled crawl and not real happy with the gear ratio in wraith trans for high speed.
jeepgod is offline   Reply With Quote
Old 04-29-2016, 10:01 AM   #6
Pebble Pounder
 
Join Date: Jul 2012
Location: Overton
Posts: 129
Default Re: RR10 IFS Tranny question

What gearing is everyone using in there Wraith Trans stock or High Ratio such as the SSD.
jeepgod is offline   Reply With Quote
Reply



RR10 IFS Tranny question - Similar Threads
Thread Thread Starter Forum Replies Last Post
RR10 rear driveline question desertdude Axial RR10 Bomber 3 03-31-2016 09:38 AM
Wraith tranny versus RR10 tranny ie yeti tranny????????? mtnbker Axial RR10 Bomber 8 12-30-2015 07:39 PM
Axial rr10 bomber question Crazysammi87 Axial RR10 Bomber 14 12-18-2015 03:37 PM
IFS Question tyerfryersc Tamiya XC/CC01 2 03-04-2011 05:02 PM
IFS Suspension Question Kage Tamiya XC/CC01 7 12-23-2010 06:04 PM
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 05:11 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com