Monster X cogging bad

[dpcardoza]

Wasn't sure where to put this but I could use some direction
Bomber with SSD High ratio transmission geared 11/56 on a HH 3500 esc. Using Turnigy 3cell 60c lipo battery. Firmware on esc is v2.02. I've confirmed that this isn't in the axles or transmission. Took apart and reassembled everything and it spins smooth.

I just emailed castle but probably won't hear anything until next week so I thought I'd post up here.

https://youtu.be/h1PE2kzJdyA



Sent from my iPhone using Tapatalk

[tallyforeman]

What transmitter? And does it have an ABS option?

Sent from my Nexus 6 using Tapatalk

[akatz]

Call them, open till 5 cst I believe.
I had the same issue with mine(brand new) couldn't turn drag brake on, cogged real bad and castle link wasnt able to change any setting in the esc so we put my buddy's mmx in and worked perfect. Sent mine In almost 2 months ago and just now got tracking for my new esc today so fingers crossed this one works because I'm absolutely dying to try it out. I know this probably wasn't much help but figured I'd share my experience.

[dpcardoza]

Originally Posted by tallyforeman

What transmitter? And does it have an ABS option?

Sent from my Nexus 6 using Tapatalk

GT3C and abs is disabled. Haven't tried rebinding to rx but have recalibrated several times.


Sent from my iPhone using Tapatalk

[dpcardoza]

Also using Holmes sensor wire and don't have another to test.


Sent from my iPhone using Tapatalk

[tallyforeman]

Originally Posted by dpcardoza

GT3C and abs is disabled. Haven't tried rebinding to rx but have recalibrated several times.


Sent from my iPhone using Tapatalk

Ok gotcha. I think that's the same transmitter I have. Somehow ABS was on without me knowing. Castle had me disable it and the cogging was gone.

Did you email them a logcat?

Sent from my Nexus 6 using Tapatalk

[BAD RC]

What version Castle Link are you using?


downloads

[dpcardoza]

I updated today to the latest castlelink and mmx 2.02 firmware hoping that it helped. I figured if it was a bad sensor wire or something it would be beeping. It seems to run fine at high speed but low speed is terrible. I guess I could try another rx and make sure it's not that but otherwise I'm at a loss.

And I'm not sure what a logcat is.

Sent from my iPhone using Tapatalk