Re: Brushless kv choice for Bomber
 

I was considering the castle 2850kv as well...seeing as you can get it with the mabma x esc for just over $200 I feel its a pretty reasonable price. I plan to do a mixture of rock crawling and bashing with mine so I think this would be a good compromise. I've also been looking at the tekin pro4 hd 3000kv motor as I see its got great reviews, but its also double the price of the castle motor. any of you experienced guys care to chime in on that?

edit: ill be running on 3s with an otherwise stock bomber.

Re: Brushless kv choice for Bomber
 

I want to turn my bomber into a formula off road with padle tires.I have 3s batteries.Which motor is a better choice?A bigger 4068 2650kv or a 3660 3800kv?I will run 3s.I want the fastest I can get but I don't want problems with overheating.

Re: Brushless kv choice for Bomber
 

I'm running a mamba x with 2200kv 1515 Castle motor on 4s, way more fun than the Castle SCT 3800kv on 2s.

Re: Brushless kv choice for Bomber
 

Which is the dimension of 1515?Did you fit it without modification?

Στλθηκε απ το PRO 6 Plus μου χρησιμοποιντας Tapatalk

Re: Brushless kv choice for Bomber
 

Holmes Hobbies now makes a 1/8 size motor if you want to go nuts

Otherwise there is the puller pro R 4100kv on 3s that is designed for races

Sent from my Pixel 2 XL using Tapatalk

Re: Brushless kv choice for Bomber
 

I was wondering a 3674 2650kv motor would be faster than a 3660 3800kv on 3s with suitable gearing?

Στλθηκε απ το PRO 6 Plus μου χρησιμοποιντας Tapatalk

Re: Brushless kv choice for Bomber
 

Holmes 3500xl on 3s. After breaking the front and rear axle housings in 2 days. The 3500 came out. The 2.2 Showdowns also came off. I would stay around 2500-2800kv.

Re: Brushless kv choice for Bomber
 

2700kv on 3s is a sweet spot for the bomber IMO. I would still personally run the 3500 because I like excess wheelspeed. Or the 2700 on 4s.

Re: Brushless kv choice for Bomber
 

I went with the Holmes PP 3500 in my bomber kit this spring and am super happy with it!! I'm running just 2s now, I have no 3s yet. Man it's fast and can crawl very well too, IMO.

Re: Brushless kv choice for Bomber
 

The 1515 slid right in, no fitment issues like when I had it in my Yeti. It is heavy though.....

Re: Brushless kv choice for Bomber
 

I have vanquish motor mount so I think the weight won't be a problem although I would choose a little smaller motor like 4068 or 3674 to avoid the extra weight of a 4074 since I will run only on 3s.

Στλθηκε απ το PRO 6 Plus μου χρησιμοποιντας Tapatalk

Re: Brushless kv choice for Bomber
 

1410-3800kv with 3S-45C seems to run well. With the throttle curve programmed in the Mamba Monster it crawls nicely well and bashes pretty fun (current setup hits 19.5mph)

With a small 2S-30C pack it goes good at crawler speeds and still runs a long time. Not quite as fast at the top end though.

My drivetrain:
Castle Mamba Monster X ESC
Castle 1410 3800Kv Sensored Brushless Motor
HotRacing Steel Pinion 32P 16T
HotRacing Steel Spur Gear 32P 68T
Axial 2-speed Transmission with Hi-Speed Option

Re: Brushless kv choice for Bomber
 

This is not the stock spur / pinion gears.
You put a Wraith transmission in it?

Sent from my Pixel 2 XL using Tapatalk

Re: Brushless kv choice for Bomber
 

Not stock at all for pinion/spur. The large shaft on the Castle motor needed a new pinion and I wanted steel so that meant steel spur also. Found the combo I liked. Running without the dust cover though since the spur is barely too large for it.

Stock transmission with the Axial 2-speed kit.

Re: Brushless kv choice for Bomber
 

I'm running a Mamba X and Tekn 412HD with 11 tooth pinion on 3S and it's more then I could hope for.

Re: Brushless kv choice for Bomber
 

What kv is your Tekin 412HD - as that's what this thread is about? "thumbsup"

Re: Brushless kv choice for Bomber
 

Yeah left that out lol, sorry. 3100KV "thumbsup"

Crawls very well down low and rips up top.

Re: Brushless kv choice for Bomber
 

With brushless do we want sensored or uncensored? kv? I'll be running 3s but don't know enough about what to choose in brushless.

Re: Brushless kv choice for Bomber
 

Sensored for sure, unless you run an outrunner. You'll want a 4 pole, the 2 pole sensored motors will work fine, but lack the torque of the 4 poles. I recommend doing some serious research on all things rc related. The more you know the more you will enjoy your rig(s). As for kv, somewhere around 3000 to 3500kv for 3s for that rig.

Sent from my SM-G970U using Tapatalk

Re: Brushless kv choice for Bomber
 

Sensored is better for most applications unless you go for the Holmes Revolver outrunner motors - they make a lot of ESC noise, Holmes is making an ESC that quiets them down.

Mine is pretty heavy because of a lot of thick stainless links and is running a Revolver 1800kv and a Mamba X, and I switch between 3S and 4S use.

Works great, I don't mind the noise, but eventually I'll upgrade to the newer ESC technology for the sake of others around me!