SCX10 Picture Archive - No talking

[Ddavis1992]

[Ddavis1992]

[Ddavis1992]

[Norton]

New Chevy is coming along.

[Sactown_Summit]

Just finished my first G6 build. Thought I would post up some pics to celebrate its completion...













...and the obligatory flex shot. :-)

[atf300]

did a little 2.5h shakedown run after the new upgrades and everything was fine besides the broken winch cable

[Richterat83]

Still a work in progress but its built and running
Dingo kit



Found a small rock pile near the train tracks down the street


After first round of upgrades.
Plasti-dipped electronics, Axial Aluminum servo horn, Vanquish Products Stage 1 kit, Currie titanium tie rod and drag link.









A few of the Treasure coast scalers at house of refuge in Stuart Florida


trimmed and ready for paint (also going to lower the body mounts a few notches- it rubbed with the stock fenders, but with the dingo flares, it's got WAY more clearance)



Painted the wheels silver so they'll do till I can find cheap silver 8 holes





latest shot, more to come later today after i get the mail and more goodies


scale replica build is complete




Just a few more touches (Crawler-Dad LED light bar and rock lights), hitec servo and bec and it'll be finished



And some of the Treasure Coast Scalers






Family photos




Ran my first scaler comp yesterday and thanks to steelerzman for the pics

[img][/img]

Ready at the start gate


Managed to pull the shock out of the shock tower which required a trip to the pits, you can see it's not there in this pic


Through 1 of the tunnels


Then managed to strip the panhard mount free 2-3 times i think which all required trips back to the pits and finally ended up just HD Zip Tying it to get me to finish


Trying to square up for the bridge and failling


but it made for an interesting line, which I did get across


hung up at the pipe riser but was able to back up and get going again


Do work driver


And across


PVC bridge with random rollers on it. First driver rolled over backwards, so used all of my skinny pedal


Well. .. that didn't work


but managed to winch off of it


attempt 2 was less skinny pedal and more winch


Still managed to roll off but was able to winch myself upright


no bounderies so i was still able to clear the gate at the end of the bridge.


Home stretch!!


and the last descent to the finish. In the words of Jezza. . . .

POWWAAAA!!!

nose dive but stayed upright through the finish

[Derek108]

Sent from my iPhone using Tapatalk

[nharkey85]

Run of the mill Rubicon kit. SV3, HPI Saturn 27T, Solar D771, Turnigy 1800mah 2S, RC4WD Pro10s (painted), RC4WD Warn scale hubs, LURC acorn nuts, RC4WD 1.9 MTZs. Minor custom work under the hood.

[MichianaRCcrawlers]

[Maraxusofkeld]

[KR15]

My scx10 lifted on 2.2 tsl mud slingers. My project rig for the moment




Sent from my iPhone using Tapatalk

[fxman]

And yet another SCX10 Hilux. Not done with the detailing

[three2won]

Finally finished my first SCX10, super happy with it, running a Holmes 35T TorqueMaster and BRXL ESC, Savox SC0251, RC4WD winch, custom soft top and diamond plate panels, and the rest is kit stock















and here's some detail shots of the top, its an old pair of jeans with bungees run through straws taped down with book binding tape

[joe122]

Hilux - Truggy -"Under Construction"
[IMG][/IMG]

[IMG][/IMG]

[MoeRon]

Cell Pic:


Another!

[pobrockcrawler]

http://www.rccrawler.com/forum/axial...-cherokee.html

[TURBOFEST]

My 4 year old Daughters Cherokee SCX10 with XR width axles, VP KMC ENDURO wheels and RC4WD Irok tires...

[joe122]

Painted....now on to the rest of it!

[IMG][/IMG]

[IMG][/IMG]

[IMG][/IMG]

[matgyver]