Here is the body I'll be running at the scale nats. Still gonna add a roof rack, snorkel..some other junk possibly. http://i52.photobucket.com/albums/g1...8/P1010607.jpg Here it is with the stock body that I use for bashing because I don't wanna break the hard body before the scale nats. Waterproof XL-5 esc and 12t titan motor. http://i52.photobucket.com/albums/g1...8/P1010593.jpg |
My SCX10 with stock body and Bronco body. |
Lawn pictures |
|
scx10 kit hpi jeep body proline scale parts http://i724.photobucket.com/albums/w...0/IMG_5209.jpg http://i724.photobucket.com/albums/w...0/IMG_5211.jpg |
My SCX10... SCX10, NOVAK GOAT BRUSHLESS 18.5, DX3R SPEKTRUM... http://img7.imageshack.us/img7/1032/...0904111809.jpg Bye JOTE CHILE |
Thorno's fj40 scx10 My scx10 with tamiya fj40 body from the land down under http://i566.photobucket.com/albums/s...NOscx10003.jpg http://i566.photobucket.com/albums/s...NOscx10001.jpg http://i566.photobucket.com/albums/s...NOscx10041.jpg |
Specs: SCX10 Clod body Futaba S3305 Futaba 153F Castle BEC Castle Sidewinder Integy 35t Lathe Poly RC 3S Lipo Homegrown 3/16" solid rod bumpers I have never been one for pristine freshly painted new truck pics. I prefer showing them off after they have been "tested". Here ya go..... http://i201.photobucket.com/albums/a.../SCX-10new.jpg |
my scx-10 3 Attachment(s) Scx-10 tazer 15t esc jr st126 servo out croppers on stock car wheels proline cj8 body painted by me... |
|
|
Dale Earnhardt Jr's Big Red Silverado |
|
|
Rooster Crawler/Tekin 35t motor for now. The Rooster is a "W" series and glitches/jitters badly at low throttle. Unacceptable. A Holmes 7t Cobalt Puller is on the way (finally!) which I will run with either a Sidewinder or an FX-R (I already have both ESCs "in stock", so experimentation is possible) Hi-Tec 5645MG & Hand Bros. kit 3Racing winch 2 7.4 volt LiPo's (2200 mah for motor/servo and 600 mah specifically for the winch) Controlled by a modded TQ3 (for now) Nekkid shot. Bumpers and rock sliders are hard-mounted. Details on bumper mounting and some closer pics can be found here if you're interested: http://www.rccrawler.com/forum/axial-scx-10/176819-bms-scx10-cgr-blazer.html http://img23.imageshack.us/img23/5/dsc01760t.jpg Pro-Line CGR Blazer w/ roof rack, lights, Western bumpers, rock sliders. WWE wrestler JBL at the wheel (for lack of anyone better - it's hard to find a good driver!) http://img8.imageshack.us/img8/6483/dsc01752lja.jpg I am trying a set of RC4WD 90mm scale shocks for the time being. They are the same eye-to-eye length as stock, with slightly less travel. I was trying to "keep it real" suspension-wise and not go for mega-articulation, replicating a highly modified yet still street-legal truck. They work well at slow crawling speeds, but are a bit lacking at higher speeds. http://img25.imageshack.us/img25/6613/dsc01753j.jpg Again, trying to keep it real. No sky-high, monster truck-like ride height here. http://img24.imageshack.us/img24/2977/dsc01744s.jpg I just wasn't digging the light bar on the very top. It stuck up too far and looked like it was ready to get snagged on anything it coud reach. I made this bracket out of black plastic and flipped the light bar upside-down. Much more streamlined looking... http://img12.imageshack.us/img12/770/dsc01759s.jpg Axial and Pro-Line have both hit home runs with these products. They have put a great looking scale rig within reach of a lot more people... http://img23.imageshack.us/img23/3319/dsc01746d.jpg RCC member FodigoDave made my fire extingusher. They're not cheap, but the level of detail is absolutely unmatched. Right down to the pin, the inspection tag, even the little twisted wire that holds the tag and pin to the neck of the bottle, it's all there. I added the 2 bands of aluminum tape, to simulate the bands of a mount. http://www.rccrawler.com/forum/showthread.php?t=168286 http://img24.imageshack.us/img24/8363/dsc01755o.jpg |
so far my hilux just a little change . so many truck here give so much inspiration to me. http://img13.imageshack.us/img13/6540/mg3332.jpg http://img2.imageshack.us/img2/880/mg3335.jpg http://img245.imageshack.us/img245/2456/mg3338.jpg |
Just stock for now, still it's not to be underestimated! EZrun 32T (1200kv) crawler (brushless) motor + esc towerpro 995mg servo intellect 5000 6cell , still running on the first charge after 4 hours! Spektrum DX3.0 85gr in each front wheel, for that perfect balanced sensation :) http://i286.photobucket.com/albums/l...9/DSC01259.jpg http://i286.photobucket.com/albums/l...9/DSC01255.jpg |
Well here's mine not to special but it's alot of fun stock kit with mamba max esc revolver brushless motor and spek radio http://i29.photobucket.com/albums/c2...c/DSCN0592.jpg |
|
All times are GMT -6. The time now is 01:03 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com