SCX10 Picture Archive - No talking

[msdelr]

My SCX10 project: "Desert Fox" AKA "Crawchie" by my fiancee
The only thing missing is the SCX10 chassis!!!) hehehe it's still not available in our LHS. Im thinking of using smaller tires on this and make it as scale as possible. I hope ill be able to build a scale looking kit without cutting the fenders!! I'll post some more when it is finished. i might forego adding the roof rack... i like the netting better I also need to research on what to paint the underside of the body to make body paint scratches realistic.
-Miker

Here's the finished kit im very much satisfied with the performance! especially my Tekin FXR combo. Ty for the suggestions on how to paint the scratch effect. My problem now is the paint on my bead-locks rings (? i dont know what u call it) chipped off!!!


Mudding with all the electronics and wirings secured by grease and silicon.

[upandover82]

Build link
LR3 Ute project From Down Under!

[NatalieMorgan]

THought I would post up some pics of my 2 scx's

First up is the Formula Toyota (F-Toy)

Standard box stock axial scx-10 with 3/16" brakeline cage, recarro cellphone holder seats, 3 racing winch, led headlights and tail lights, 3c lipo, castle creations sidewinder, Proline G8 flatirons with weighted front wheels.

Going to be changing out the wheels eventually.

[NatalieMorgan]

Next up is my SCX-10 Rockcharger
Box stock SCX-10, Proline Ramcharger body, custom hand made interior, rocksliders, Roll Cage and bumpers. All 3/16" brazed brakeline. 3 racing winch, CC sidewinder/BEC 3s Lipo, 55 turn CUstom 1.9 SLot mags made buy Roccrusher on NOSTR, still a work in progress.

[KorpseofDeath420]

Here some shots from the Hayward Shore Line. Took a bike trip out a few miles until I found this nice spot.

Here's my trucks details

Stock SCX-10 Chassis
Bushwacker Body with RC Lights+Roof and Accessories
3R Winch

Novak ESC + Novak 18.5T Sensored Brushless Motor
14T Pinion and 87 Spur
DX3 2.4Ghz Rx Tx Radio
2S 2400MaH Lipo Battery
Hyperion 0606i Charger

[4x4Offroad]

Assembled my SCX10 today and here it is, I just need to find a way to mount he body.

[1rcmonster]

SCX10
Hitec 645mg
Novak Rooster Crawler
Trinity Monster Horsepower 27t with 15t pinion
DX3R
3r winch
Pro-Line Descender body with scale accesories
Paint is Faskolor KeyLime...





Future plans to add spare tire carrier to rear of frame...

[kill bill]

here is my scx10, fxr esc - 35 turn tekin- hpi sf-5 servo- hands
brothers servo mount-mip shafts- hardened trans gears-hd lockers-
ckrc rear axle lock outs- losi rock claws tires- 6 0z. weight in each
front wheel.

bill

[themexxxican]

Originally Posted by fastgixxerlv

That was wierd... It did'nt take all the pics??? Here's more.













More to come when I get her dirty. It's my first crawler build so not perfect. Maybe the next one I'll get a body that fits better.

Dude, your SCX10 is exactly like mine. I don't know how to add pics and i wish i knew so i can show u mine. The body is from Fast Lane Jeep Wrangler Unlimited. Mine sits exactly as urs. If u send me ur email i will send u some pics of mine.

[gtoramair455]

my first scx10. this is one fun truck.

[Steve at Danfor]

Here is mine - Many thanks to Dave Jones at Bodywerx here in Ottawa for the paint and dialing in of truck. I shall be hauling a way sick fast (5 cell lipo - so be able to reverse) brushless boat down to the lake with this baby. I am more into Fast Electric boats than trucks but this outfit is really sweet to show them off! Check the Video below too.

http://www.youtube.com/watch?v=Xhyfygk4ZSc

[BJoe]

Here's my AX10 ex-comp rig that's been converted to a SCX10




It's running an AXial B-17 body that I originally painted for my WK and redrilled for this truck, an E-Revo reverse wind motor (which will be swapped for the E-Maxx/Revo normal rotation motor when I can get that pulled from the LCC and put the Trinity Monster Maxx 21t in that), and a Deans plug for the ESC.

[finishline]

My build thread And another one!! SCX CGR K5

[Devilbrad]

Mine (well Dads, but I'll be using it more, LOL) Box stock with a Novak Rooster ESC and 55T motor, a Venom 1800 battery (from my Truggy starter box), Betty body, and a lowly Futaba S3305 servo until I decide on a good one.

[shortlux]

My Scx10

Specs:
-Flat Iron G8
-3racing winch
-Proline Bushwacker body
-Tamiya Land Cruiser detales and stickers
-SDI Fender flares
-Tamiya Hummer mirrors
-Proline scale stuff,,,
-Novak Rooster
-Novak 55t
-Hitec 5645mg

Pictures

[Badd]

Well I guess it is time to put my SCX-10 pics up .




Build thread can be seen here .
Badd's K-5 Blazer

[Axial Rose]

This is NOT the body I'm going to end up with - it was just something quick & cheap to get me going (obviously a $9 New Bright toy after minor surgery).

And DO NOT install the wheel rings like this - I was told by someone they could be mounted this way, no problem. Of course, I assembled the tires & wheels before anything else - proving once again, some advice is worth exactly what you pay for.

[Devilbrad]

Some new pics. Trimmed body more and moved it up one hole. Shock collars all the way at top and upper mounts towards tranny, no limiters, bone stock truck. I think it flexes pretty damn good. And yes, I drove it into those positions.

[mmbackpacker]

Finally (mostly) finished my scaler. Pretty basic build and components...so I will just list the one-offs and custom pieces.
DIY servo tuck with battery plate
Shortened rear links to 70mm, shortened tri-link
Newbright LR3 body, LEDs installed but not yet working....
Traxxas waterproof 2075 servo and EX5 esc
HPI stock car wheels
Spare out back
CB antenna

anyway, on to what we all like, the pictures...

[Stburr91]