Updates on my SCX10......... 4 Attachment(s) I've been driving the SCX10 pretty much stock for about a month now, and it's been awesome. But, I figured it was time to start making a few custom mods. First thing I did was re-locate the steering servo from the front axle to the chassis with a couple home made brackets that tie into the stock frame cross members. I was just able to shoe horn it in underneath the battery tray out front and get very minimal bump steer. It took a few tries to get the placement right, but it seems to be working pretty good from the couple small test runs I've got on it. I also cut the servo plate posts off the front axle to clean it up and give it a more realistic look. I also plan on cutting the posts off the rear axle as well. |
Looks really good so far |
1 Attachment(s) Quote:
Next up was figuring out what body to run. Since I'm going to go for the pre-runner look on this particular build our Diablo body (Part # AX4002) was a prefect fit. The wheels are perfectly centered in the wheel wells without any mods to the stock SCX10 wheelbase. "thumbsup" |
That body looks awesome! |
Looks bada$$ with that body!!!!!! |
Pre-runner...? Lemme guess, brushless and big power! "thumbsup" |
Quote:
Quote:
Quote:
|
Sawheat! After watching the SCX build yesterday, I'm thinking I want a goat system. "thumbsup" So Brad, can you make any comment on the hinted at new axial shocks that are coming soon? |
3 Attachment(s) Installed some of our upgrades on the front axle..................aluminum C's and knuckles, as well as CVD's. |
Looks sweet Brad! Which compound tires are you running? Prototype G8's or the M2's? I am curious how they compare. |
Quote:
|
Quote:
|
Nice job Brad. You always did like those huge bodies on your scalers.:lol: |
Quote:
|
4 Attachment(s) Can't have a pre-runner without some spare tires. ;-) |
Quote:
Quote:
|
looking really good brad. I like the servo mount and the spare tires. Very nice pre-runner style. "thumbsup" will this be your '09 scale nats 1.9 entry? wondering how many scx10's there will be this year, guessing a ton. :) |
So are you going to do some cage work on this thing? Welded or brazed right to the c-channel? |
Quote:
If I can make the comp, this will be the rig I run. I'm guessing there will be a bunch of SCX10's there this year. ;-) Quote:
|
2 Attachment(s) To hold the rear tires in place I used a red 98mm link, and drilled/tapped an M3 hole at each end. I opened up the holes in the center of the wheels to .236 diameter which allow the link to slide through. Then drilled a couple holes in the body that are used to attach the link to the body. 8) |
All times are GMT -6. The time now is 06:28 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com