RCCrawler Forums

finishline · 03-21-2009, 12:09 PM

Quote:

Originally Posted by crawldog

wondering around on pro-lines page and saw this

...http://www.prolineracing.com/p-627-a...roll-cage.aspx

SHHHHH! dont tell him

Trikster · 03-21-2009, 12:31 PM

Quote:

Originally Posted by finishline

SHHHHH! dont tell him

He already knows... Post 153...

finishline · 03-21-2009, 01:58 PM

Quote:

Originally Posted by Trikster

He already knows... Post 153...

Damn! I thought he would never find out that proline mysteriously took the pics of his rig and posted them on there home page without him knowing it

Steve at Danfor · 03-22-2009, 04:38 PM

Very Sweet Work. I have been studying this thread so as to gain valuable knowledge. You are a scale modeler to high a degree! Am I confused or what but I cant seem to find the Mod where you moved the steering servo off the axil. Steve up in Ottawa Canada - I am building a similar scale truck (SCX10 Kit in Mail) that will pull a trailer (I have a nice Whitebone) with a Fast Electic Boat (already built and running) and have the ability to off load the boat in lake which takes off for a run. All this while sitting on the deck of the Boathouse at the lake!

Brandon · 03-23-2009, 10:42 AM

Time for some updates!! I have been waiting until I got a few things together to sit down and make a bunch of changes.

Huge thanks to 62PYRO for the winch stickers and the fresh new rings

Also would like to thank Pro-Line for all these great new scale products. I was waiting a long time for the Blazer CGR and its finally here. Still havent decided on the color scheme but I cant wait!

List of changes:
Pro-Line Blazer CGR body (The full interior is AMAZING)
Pro-Line Roof Rack
Pro-Line G8 Flat Irons
62PYRO Rock Rings
Axial Spare wheel
Axial 4-link plate for the rear
Mod the front axle for more steering

So here are a few before pics:

New parts

When I first saw the rings they looked great. I decided to add a little more depth to them.

Brandon · 03-23-2009, 10:46 AM

Quote:

Originally Posted by Steve at Danfor

Very Sweet Work. I have been studying this thread so as to gain valuable knowledge. You are a scale modeler to high a degree! Am I confused or what but I cant seem to find the Mod where you moved the steering servo off the axil. Steve up in Ottawa Canada - I am building a similar scale truck (SCX10 Kit in Mail) that will pull a trailer (I have a nice Whitebone) with a Fast Electic Boat (already built and running) and have the ability to off load the boat in lake which takes off for a run. All this while sitting on the deck of the Boathouse at the lake!

Steering servo is still on the axle

the height of the body is low enough to hide it with the bumper.

62PYRO · 03-23-2009, 11:38 AM

I can't wait to see the changes.I really like what you did with the rings.

Now get to painting so we can see that Blazer.

Pat

gyrene · 03-23-2009, 01:49 PM

Awesome, Awesome build. I can't wait to see the new updates. Those chamfered edges on the new rings really set it off!

Steve at Danfor · 03-23-2009, 02:37 PM

Thanks - You anwered my question even though it was a stupid one - I was thinking of another thread no doubt. Anyway - Your build is way nice Man - If mine comes up anything 1/2 as nice I'll be happy. I too am following your work to gain tips and info. Thanks Again - Steve

finishline · 03-23-2009, 03:41 PM

Was the drill press used?

WarTrader · 03-23-2009, 05:24 PM

Great rig working on gettting one together myself! I have one question. I saw the mounting position for the FXR. Did you water proof it ?

NeXt559 · 03-23-2009, 06:36 PM

Quote:

Originally Posted by Nluvwithxlr8ing

Time for some updates!! I have been waiting until I got a few things together to sit down and make a bunch of changes.

...

List of changes:
Pro-Line Blazer CGR body (The full interior is AMAZING)
...

finally somone else w/ a cgr blazer body
i was begining to think i was the only one

cant wait to see how you mount it up, ive been thinking about redoing mine cause it's starting to look a little jank the more i look at it. can't wait to maybe "steal" some of your ideas

.

XSRCdesign · 03-23-2009, 08:05 PM

Watching....

Harley · 03-23-2009, 10:10 PM

Sweet......cool........awesome........

NOW GO WORK ON MY STUFF!

Brandon · 03-24-2009, 09:01 AM

Quote:

Originally Posted by 62PYRO

I can't wait to see the changes.I really like what you did with the rings.

Now get to painting so we can see that Blazer.

Pat

Thanks Pat. I have no idea how I am going to paint it. I keep wanting to do black though...

Quote:

Originally Posted by gyrene

Awesome, Awesome build. I can't wait to see the new updates. Those chamfered edges on the new rings really set it off!

Thanks!

Quote:

Originally Posted by finishline

Was the drill press used?

Yup, pretty simple. Go ahead James... Copy me

Quote:

Originally Posted by WarTrader

Great rig working on gettting one together myself! I have one question. I saw the mounting position for the FXR. Did you water proof it ?

Not yet, it needs to be though. I got pretty lucky I didnt fry it on the water runs but I think the wheel wells up front probably saved me.

Quote:

Originally Posted by NeXt559

finally somone else w/ a cgr blazer body
i was begining to think i was the only one

cant wait to see how you mount it up, ive been thinking about redoing mine cause it's starting to look a little jank the more i look at it. can't wait to maybe "steal" some of your ideas

.

There is another one locally. It looks great, I will see if I have a pic.

Quote:

Originally Posted by Harley0706

Sweet......cool........awesome........

NOW GO WORK ON MY STUFF!

What stuff?

Brandon · 03-24-2009, 09:03 AM

The yellow one is a blazer, sorry I dont have any better pics but the SCX10 with the longer wheelbase and this body looked great!

Thought this was cool too. 1.9's stretched over Pro-Line 2.2 8 shooters

punkuup5150 · 03-24-2009, 09:59 AM

brandon ask your teacher what fill flash is and how to use it lol that one really needed it >_< but that rig was awsome i was looking at it also i really liked the 1.9s on the 2.2 really good idea for ne one doing a more of a show truck

Brandon · 03-25-2009, 02:13 PM

Quote:

Originally Posted by punkuup5150

brandon ask your teacher what fill flash is and how to use it lol that one really needed it >_< but that rig was awsome i was looking at it also i really liked the 1.9s on the 2.2 really good idea for ne one doing a more of a show truck

Hey I am still learning!

Yeah I agree, the 2.2's look sweet on there. Probably side-hills a little better too

Brandon · 03-27-2009, 08:38 AM

Started stretching the WB last night. I used the Axial 4 Link plate and moved the lower links to the uppers. Found some old (savage I think) links that were perfect for the lowers.

Now that the WB was corrected I wanted to increase the center clearance. I cut the ends off an AX10 chassis and used them for some temporary adjustable shock mounts in the rear. I will make some new ones soon.

Here is an overall shot with the rear raised. Still need to do the front.

Couldnt help but trim the body and check it out

Cage and Roof Rack finish it off!

SMFtwstdHICK · 03-27-2009, 08:41 AM

Great looking Blazer body. PLEASE tell me that Proline is FINALLY gonna think about making a friggin FULL BODY Bronco w/ TOP? Not that crap that is out now by HPI.

03-22-2009, 04:38 PM	#244
Steve at Danfor Rock Stacker Join Date: Mar 2009 Location: Ottawa Posts: 69	Choice Job! Very Sweet Work. I have been studying this thread so as to gain valuable knowledge. You are a scale modeler to high a degree! Am I confused or what but I cant seem to find the Mod where you moved the steering servo off the axil. Steve up in Ottawa Canada - I am building a similar scale truck (SCX10 Kit in Mail) that will pull a trailer (I have a nice Whitebone) with a Fast Electic Boat (already built and running) and have the ability to off load the boat in lake which takes off for a run. All this while sitting on the deck of the Boathouse at the lake!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-23-2009, 10:42 AM	#245
Brandon Im Brandon Join Date: Feb 2005 Location: Colfax, CA Posts: 8,156	Time for some updates!! I have been waiting until I got a few things together to sit down and make a bunch of changes. Huge thanks to 62PYRO for the winch stickers and the fresh new rings Also would like to thank Pro-Line for all these great new scale products. I was waiting a long time for the Blazer CGR and its finally here. Still havent decided on the color scheme but I cant wait! List of changes: Pro-Line Blazer CGR body (The full interior is AMAZING) Pro-Line Roof Rack Pro-Line G8 Flat Irons 62PYRO Rock Rings Axial Spare wheel Axial 4-link plate for the rear Mod the front axle for more steering So here are a few before pics: New parts When I first saw the rings they looked great. I decided to add a little more depth to them.

03-23-2009, 11:38 AM	#247
62PYRO Built, not bought Join Date: Oct 2004 Location: Gresham Posts: 4,504	I can't wait to see the changes.I really like what you did with the rings. Now get to painting so we can see that Blazer. Pat

03-23-2009, 01:49 PM	#248
gyrene Rock Crawler Join Date: Jan 2007 Location: Do I look like a freaking people person? Posts: 874	Awesome, Awesome build. I can't wait to see the new updates. Those chamfered edges on the new rings really set it off!

03-23-2009, 02:37 PM	#249
Steve at Danfor Rock Stacker Join Date: Mar 2009 Location: Ottawa Posts: 69	Thanks - You anwered my question even though it was a stupid one - I was thinking of another thread no doubt. Anyway - Your build is way nice Man - If mine comes up anything 1/2 as nice I'll be happy. I too am following your work to gain tips and info. Thanks Again - Steve

03-23-2009, 03:41 PM	#250
finishline RCC Addict Join Date: Nov 2007 Location: CALI "209" Posts: 1,970	Was the drill press used?

03-23-2009, 05:24 PM	#251
WarTrader Rock Crawler Join Date: Oct 2008 Location: Somewhere near the lake in IL Posts: 975	Great rig working on gettting one together myself! I have one question. I saw the mounting position for the FXR. Did you water proof it ?

03-23-2009, 08:05 PM	#253
XSRCdesign I wanna be Dave Join Date: Aug 2005 Location: NE Ohio Posts: 8,816	Watching....

03-23-2009, 10:10 PM	#254
Harley 20K Club Join Date: Jul 2004 Location: Sending illegals home one Hayabusa at a time. Posts: 22,981	Sweet......cool........awesome........ NOW GO WORK ON MY STUFF!

03-24-2009, 09:03 AM	#256
Brandon Im Brandon Join Date: Feb 2005 Location: Colfax, CA Posts: 8,156	The yellow one is a blazer, sorry I dont have any better pics but the SCX10 with the longer wheelbase and this body looked great! Thought this was cool too. 1.9's stretched over Pro-Line 2.2 8 shooters

03-24-2009, 09:59 AM	#257
punkuup5150 Rock Crawler Join Date: Mar 2008 Location: lodi Posts: 952	brandon ask your teacher what fill flash is and how to use it lol that one really needed it >_< but that rig was awsome i was looking at it also i really liked the 1.9s on the 2.2 really good idea for ne one doing a more of a show truck

Sponsored Links

03-27-2009, 08:38 AM	#259
Brandon Im Brandon Join Date: Feb 2005 Location: Colfax, CA Posts: 8,156	Started stretching the WB last night. I used the Axial 4 Link plate and moved the lower links to the uppers. Found some old (savage I think) links that were perfect for the lowers. Now that the WB was corrected I wanted to increase the center clearance. I cut the ends off an AX10 chassis and used them for some temporary adjustable shock mounts in the rear. I will make some new ones soon. Here is an overall shot with the rear raised. Still need to do the front. Couldnt help but trim the body and check it out Cage and Roof Rack finish it off!

03-27-2009, 08:41 AM	#260
SMFtwstdHICK Rock Crawler Join Date: Feb 2007 Location: Simi Vly Posts: 818	Great looking Blazer body. PLEASE tell me that Proline is FINALLY gonna think about making a friggin FULL BODY Bronco w/ TOP? Not that crap that is out now by HPI.

RCCrawler Forums

Thread: Nluvwithxlr8ing's Axial SCX10 Build + Pro-Line Scale Accessories