* Giveaway - MSD - SCX-10 CMS KIT - Hand Bros Offroad * MSD is proud to release the brand new Hand Bros Off Road SCX-10 Chassis mounted steering kit! This IS the one piece for your SCX-10 kit that you will NEED to have."thumbsup" The first run of these is done and ready to ship next week, we only have 40 kits, so if you want one you better email us ASAP! E-MAIL - info@montanascaledesigns.com Features of the kit are: - Mounts the steering servo on chassis for a more scale looking and working steering setup. - Changes front suspension to a true 3-link with panhard for almost zero bump steer. - All parts cut from T-6 aluminum and black anodized for good looks and corrosion resistance. - Servo mount locks into the frame rail and axle the bracket bolts on with 4 screws for a bomb proof installation. - 100% made in the USA ! "thumbsup" - Kit available here: http://rccrawler.com/forum/showthread.php?t=166290 - You can buy the Axle bracket separately if you want to add it to your own steering setup. Giveaway: You must be a STAR holding member to qualify, get your star here: http://www.rccrawler.com/forum/payments.php you may only post ONE time in the drawing, you MUST post a pic of your SCX-10 on the rocks that you want to put the kit on. Drawing ends : March 21st, better hurry."thumbsup" pics: what you get: http://i31.photobucket.com/albums/c3...m/100_4680.jpg http://i29.photobucket.com/albums/c2...rlytlt/058.jpg http://i29.photobucket.com/albums/c2...rlytlt/059.jpg http://i29.photobucket.com/albums/c2...rlytlt/061.jpg http://i29.photobucket.com/albums/c2...rlytlt/062.jpg http://i29.photobucket.com/albums/c2...rlytlt/056.jpg |
Ohh My. I want one. Is the servo bracket bolted to one of the existing holes on the frame http://img9.imageshack.us/img9/380/scx1022.jpg |
1 Attachment(s) Just what the SCX10 needed. |
|
in and thanks |
Quote:
Quote:
|
I'm in, Thanks MSD"thumbsup" (all rocks here are covered in snow still:-() http://i122.photobucket.com/albums/o...lerPics007.jpg |
Me In Nice work MSD http://www.rccrawler.com/forum/pictu...pictureid=1318[/IMG] |
|
1 Attachment(s) I'm in - Thanks for the great part! |
1 Attachment(s) I want one for my scx10 please:) |
|
Nice! I'm in! http://i294.photobucket.com/albums/m...nnib/011-9.jpg |
giveaway ends next friday guys, dont miss out."thumbsup" |
mine...... mines on order......cant wait to get it......hurry pleassssssse.....thanks guys....ill be reppin in hawaii..... |
|
I'm hoping I can enter even though I don't have a "SCX10". LET ME EXPLAIN.I am however in the middle of gettting parts for my 1.9 Pajero build.The build is sort of going to be a cross between excesivefire and pantablos Pajero builds.I have the Axial axles,tranny,1.9 Flat Irons and SCX10 rims,basically the hard parts except the frame from the SCX10.BUT im waiting for the chassis to become available.I got the body early this week and its been cut and is about ready to go to paint,maybe,still might cut off the top.This 3-link is going to be a perfect fit for my build since I wanted frame mounted servo.Plus I'm going to learn to make a cage.Should be a great learning experience for me. I hope that you'll let me enter.PLEEEAAAASE!:lol: Here is a pic of the pile of parts.The axles,tranny are off my soon to be dissasembled comp rig and the other 3 Flat Irons are on my Bushwacker.Did I say PLEEAASE!:lol: http://img.photobucket.com/albums/v1...e/DSCF0055.jpg |
im in thanx a lot awsome set up like it alot...GSRCC Drail |
i want one of these bad boys well i dont have any pictures on the rock b/c well i havent taking it out yet lol http://i96.photobucket.com/albums/l1...0/DSC03956.jpg |
1 Attachment(s) Those are some nice looking parts!!!! |
All times are GMT -6. The time now is 06:12 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com