|
| LinkBack | Thread Tools | Display Modes |
11-19-2009, 08:57 PM | #1 |
Rock Crawler Join Date: Aug 2008 Location: Portland, Maine
Posts: 625
| Can a Rooster ESC handel a stock TR motor with 2 cell Lipo?
Can a rooster crawler ESC handle a stock SCX10 TR motor on 2 lipos ? The TR motor is 27 turn and the rooster specs say the limit is 27 turn with 6 cell. Anyone do this with a 2 cell lipo? |
Sponsored Links | |
11-19-2009, 09:15 PM | #2 |
www.team3sixrc.com Join Date: Mar 2008 Location: Scalerville
Posts: 4,506
| http://www.teamnovak.com/products/es...ecs/index.html basically if you got an XBEC and set the bec to 5.7V, technically you could do it, But I am not 100% positive, only 99.8% sure But the other thing to concider is the voltage needed to opperate fuctions as well if the internal heatsinks installed can the voltage supplied. Even though your XBEC is set to that, the ESC still has to process it. Another issue is that youill have to get a voltage cut off. That ESC doesnt have one obviously. Last edited by team3six; 11-19-2009 at 09:18 PM. |
11-20-2009, 08:46 AM | #3 |
I wanna be Dave Join Date: Nov 2007 Location: Memphis
Posts: 4,786
|
I'm think that when you run 2 packs parallel it just raises the mAh, instead of raising the voltage. Do a search on it but I think you will be fine if you wire them correctly.
|
11-20-2009, 09:53 AM | #4 | |
www.team3sixrc.com Join Date: Mar 2008 Location: Scalerville
Posts: 4,506
| Quote:
I was assuming he was using the Rooster, and not the Rooster crawler. Perhaps that would help in knowing which one specifically he was refering to. | |
11-20-2009, 10:16 AM | #5 |
RCC Addict Join Date: Jan 2009 Location: Crawlifornia
Posts: 1,941
| X 2 Not knowing the whole setup or actual rooster / crawler esc one cant give a definate answer
|
Thread Tools | |
Display Modes | |
| |