RCCrawler Forums

801RYAN · 03-17-2011, 10:45 PM

oh and great work on trimming them down...

willipmartinni · 03-20-2011, 04:54 PM

finally got this back together, Wired, and well lets say Kicking It! check the vid. gotta build up the rear axle now. I totally broke my panhard bar in a huge wild flip before i turned the video camera on, so it wasnt steering very well. but i still wanted to get some video i could slow down. new weight 10.458 lbs.

eric113 · 03-20-2011, 08:15 PM

Holy Crap. 22v and 2250kv looks fun.

What battery are you using ?

willipmartinni · 03-20-2011, 08:29 PM

Quote:

Originally Posted by eric113

Holy Crap. 22v and 2250kv looks fun.

What battery are you using ?

two thunder power 2250mah pro power 30c dont know how long they will last, I keep breaking things but it is quite fast.

JeSuS619 · 03-21-2011, 03:32 AM

Quote:

Originally Posted by willipmartinni

two thunder power 2250mah pro power 30c dont know how long they will last, I keep breaking things but it is quite fast.

that is a beast!!!

eric113 · 03-23-2011, 10:51 PM

Did you fix everything you broke ?

Still bad B.A.M.F. rig.

willipmartinni · 03-23-2011, 11:03 PM

it keeps eating bec's. dont have a clue why.the bec is only powering the steering servo. im going to get a caslte pro bec but until then im just going to hook the servo up direct to the receiver. im in awe at just how fas it is. the video doesnt do it justice. every time ive been able to drive it ive not had much for steering, due to first a busted panhard and the the bec's, two of them, dead. but today on the asphalt i carried a thirty foot wheely at about mach ten. Ive really got to get the "thinker" parts cut and a chromoly chassis built cause when this thing tumbles its tearing the chassis up. Drivetrain has not been an issue though so thats cool.

eric113 · 03-24-2011, 06:32 AM

Quote:

Originally Posted by willipmartinni

it keeps eating bec's. don't have a clue why.the bec is only powering the steering servo. I'm going to get a castle pro bec but until then im just going to hook the servo up direct to the receiver. im in awe at just how fas it is. the video doesnt do it justice. every time ive been able to drive it ive not had much for steering, due to first a busted panhard and the the bec's, two of them, dead. but today on the asphalt i carried a thirty foot wheely at about mach ten. Ive really got to get the "thinker" parts cut and a chromoly chassis built cause when this thing tumbles its tearing the chassis up. Drivetrain has not been an issue though so thats cool.

What esc are you using ? What do you have the bec's set to ?

willipmartinni · 03-24-2011, 08:10 AM

Quote:

Originally Posted by eric113

What esc are you using ? What do you have the bec's set to ?

rx8, 6v

eric113 · 03-24-2011, 11:14 AM

Quote:

Originally Posted by willipmartinni

rx8, 6v

It gotta be the way you have it wired up.

willipmartinni · 03-24-2011, 01:02 PM

Quote:

Originally Posted by eric113

It gotta be the way you have it wired up.

What ev...

crazee horse · 03-24-2011, 01:11 PM

dare i ask why ?

willipmartinni · 03-24-2011, 11:03 PM

Quote:

Originally Posted by crazee horse

dare i ask why ?

im wondering that myself about now...

eric113 · 03-25-2011, 06:51 AM

Quote:

Originally Posted by willipmartinni

What ev...

Can you post up a diagram of how you have your truck wired ?

Your axle shaft.... twisted and shock loaded =

Gunstar Hero · 03-25-2011, 08:47 AM

Ouch man! That's some hard running there. Good work.

willipmartinni · 04-05-2011, 08:30 PM

oh wow i was just noticing how the rear frame structure has gotten bent to where its touching the rear axle. eek going to have to fix some cracks and reinforce some spots.

buggy · 04-16-2011, 08:47 PM

nice

eric113 · 04-26-2011, 06:30 PM

Did you get your rig fixed yet ?

25 days before scale nats.

willipmartinni · 04-26-2011, 06:34 PM

yeah, rig has been fixed since about three days after i tore up all that stuff. ive been waiting to post up in the TTC voting thread cause The too much thinking parts are supposed to be cut tomorrow afternoon..... so i have a chance to get that up before voting starts saturday. Woot Are you going to nats??

eric113 · 04-26-2011, 06:39 PM

Quote:

Originally Posted by willipmartinni

yeah, rig has been fixed since about three days after i tore up all that stuff. ive been waiting to post up in the TTC voting thread cause The too much thinking parts are supposed to be cut tomorrow afternoon..... so i have a chance to get that up before voting starts saturday. Woot Are you going to nats??

Sounds like you have alot work head of you.

I wish I was going. Didn't work out.

03-20-2011, 04:54 PM	#122
willipmartinni Rock Crawler Join Date: Jun 2008 Location: South Ogden, Utah Posts: 678	2250 t8, 22v Fun destruction! finally got this back together, Wired, and well lets say Kicking It! check the vid. gotta build up the rear axle now. I totally broke my panhard bar in a huge wild flip before i turned the video camera on, so it wasnt steering very well. but i still wanted to get some video i could slow down. new weight 10.458 lbs.

03-17-2011, 10:45 PM	#121
801RYAN Rock Crawler Join Date: Feb 2010 Location: in a Fishbowl watching time go by Posts: 923	oh and great work on trimming them down...

03-20-2011, 08:15 PM	#123
eric113 Moderator Rule Breaker Join Date: Feb 2004 Location: Austin, Tx Posts: 5,970	Holy Crap. 22v and 2250kv looks fun. What battery are you using ?

03-23-2011, 10:51 PM	#126
eric113 Moderator Rule Breaker Join Date: Feb 2004 Location: Austin, Tx Posts: 5,970	Did you fix everything you broke ? Still bad B.A.M.F. rig.

03-23-2011, 11:03 PM	#127
willipmartinni Rock Crawler Join Date: Jun 2008 Location: South Ogden, Utah Posts: 678	it keeps eating bec's. dont have a clue why.the bec is only powering the steering servo. im going to get a caslte pro bec but until then im just going to hook the servo up direct to the receiver. im in awe at just how fas it is. the video doesnt do it justice. every time ive been able to drive it ive not had much for steering, due to first a busted panhard and the the bec's, two of them, dead. but today on the asphalt i carried a thirty foot wheely at about mach ten. Ive really got to get the "thinker" parts cut and a chromoly chassis built cause when this thing tumbles its tearing the chassis up. Drivetrain has not been an issue though so thats cool.

03-24-2011, 01:11 PM	#132
crazee horse Rock Crawler Join Date: Jul 2010 Location: Great Britain Posts: 767	dare i ask why ?

03-25-2011, 08:47 AM	#135
Gunstar Hero Newbie Join Date: Jun 2010 Location: Northern CA Posts: 28	Ouch man! That's some hard running there. Good work.

04-05-2011, 08:30 PM	#136
willipmartinni Rock Crawler Join Date: Jun 2008 Location: South Ogden, Utah Posts: 678	oh wow i was just noticing how the rear frame structure has gotten bent to where its touching the rear axle. eek going to have to fix some cracks and reinforce some spots.

04-16-2011, 08:47 PM	#137
buggy RCC Addict Join Date: May 2009 Location: NHFF world headquarters, working on the "rock mauling hill shooting NHFF pig squealing death rocket" Posts: 1,134	nice

04-26-2011, 06:30 PM	#138
eric113 Moderator Rule Breaker Join Date: Feb 2004 Location: Austin, Tx Posts: 5,970	Did you get your rig fixed yet ? 25 days before scale nats.

04-26-2011, 06:34 PM	#139
willipmartinni Rock Crawler Join Date: Jun 2008 Location: South Ogden, Utah Posts: 678	yeah, rig has been fixed since about three days after i tore up all that stuff. ive been waiting to post up in the TTC voting thread cause The too much thinking parts are supposed to be cut tomorrow afternoon..... so i have a chance to get that up before voting starts saturday. Woot Are you going to nats??

Sponsored Links

RCCrawler Forums

Thread: scx10 f150 truggy