10-10-2015, 10:26 PM | #1 |
RCC Addict Join Date: Apr 2015 Location: New Brunswick,Canada
Posts: 1,425
| R.N.S Jeep NukNukizer 715 3rd SCX10 Build
Well time to try another build,Since fall is here and winter is around the corner i thought i start something up. Nothing Special here just your straight forward build with a few upgrades. Ever since they came out with the Jeep Nukizer 715 body i had to build Another SCX10. So i been collecting parts for some time and what ever parts i have hear,I think i have every thing i need. I received this Jeep Nukizer 715 body back in August,yes that right August almost 2 month hung up on the wall itch-en to be painted. Looking forward to painting it up and getting these parts together. Speaking of paint,it will be my first Attempt to use an Air Brush,so that should be interesting Not sure of the paint scheme but will see and I still don't know what colors yet. I'll decide as the build progresses.... Here are some of the parts I'll be using.Most parts will be stock parts and a few upgrades... I may take the the canvas top and cut it off so i will be able to put on or off,but still not sure. Any ways this what i have so far. Stock Axial Jeep G6 kit "Brand New Roller Minus Tires Axial Jeep Nukizer 715 Body #AX31267 Axial SCX10 Wheel Wells 040 #AX31150 Axial Wraith Interior .040 #AX31177 Axial 2.2 IFD set #AX31118 Axial IFD Hex Conversion #Ax31074 Axial AE-5 WP ESC # AX31144 Axial Stock Tranny Tactic W/P TXS45 Servo Lockup scale bolts"Complete Set For SCX10" 1220-C Lockup rings "Agile Mango Orange Special Edition"With scale bolts SSD front & Rear D60 axles with scale bolts # SSD00059,Scale Bolts # SSD00028 SSD Servo Mount Plate D60 # SSD00057 Pitbull Growlers 2.2 #PN9008NK Pitbull Foam Inserts #PB9001FM Or Super swamper 2.2 RC4WD or Flat iron 1.9 g8" #10112-00 Proline Faultline 2.2 bead locks #2758-15 with Lockup silver scale bolts earth magnets for body post HK Integy shock hoops Hobby king 45T brush motor Hobby king 4 channel lighting system 16 lights "4 Functions" 1000 Mah lipo 2c 20c for lights Vanquish SCX FSM #VP07330 CC BEC 10A 6S #010-0004-00 in the mail. Last edited by rustneversleeps; 10-10-2015 at 10:28 PM. |
Sponsored Links | |
10-10-2015, 11:52 PM | #2 |
Rock Stacker Join Date: Sep 2015 Location: Battle Ground WA
Posts: 62
| Re: R.N.S Jeep NukNukizer 715 3rd SCX10 Build
Looking forward to the build, been trying like crazy to find a Nukizer body!
|
10-11-2015, 12:32 AM | #3 |
RCC Addict Join Date: Apr 2015 Location: New Brunswick,Canada
Posts: 1,425
| Re: R.N.S Jeep NukNukizer 715 3rd SCX10 Build
Ya i was very fortunate to get one when i did back in Aug.Since then they been out of stock,but i see now that tower hobbies says "now on order" before it was Mid-Nov so you might be in luck.just ask for request email when in stock so they'll let you when there in stock or you could check RPP but there are "out of stock"... EDIT: just checked my records i bought the body July 23 not Aug but it took about 7 days to get here so like Aug 1st Last edited by rustneversleeps; 10-11-2015 at 12:39 AM. |
10-11-2015, 12:56 AM | #4 |
Rock Stacker Join Date: Sep 2015 Location: Battle Ground WA
Posts: 62
| Re: R.N.S Jeep NukNukizer 715 3rd SCX10 Build
Yeah I just added myself to the email notification...Hopefully I can pick one up soon! Anyway good luck with the build! |
10-11-2015, 11:55 AM | #5 |
RCC Addict Join Date: Apr 2015 Location: New Brunswick,Canada
Posts: 1,425
| Re: R.N.S Jeep NukNukizer 715 3rd SCX10 Build
well i started putting the SSD axles together with some 3mm scale bolts.. when i open the Lock-up the complete scx10 scale bolt,package i notice these little things.I didn't know what they were you for but figure it in the manual.there are made to put in the shock hoops and the little clips to hold the wires on the scx10.... Made my self a 2mm driver from a 2mm set screw until the ones from lock-up came in now that i have them be good for spare... Now that's out of the way here's the diffs and what i used..... I used these Traxxas 3mm x 6mm washers i found.i love the scale bolts from lock-up but i wish the lower part of the hex bolt was a little bigger on the bottom so i use the washers i think it looks better before and after.. i use the dull side of the washer..... here's with out the washer...... and here with washer..... here are the axle all complete.... More to come |
10-11-2015, 08:59 PM | #6 |
Status...ADDICTED! Join Date: Jun 2011 Location: Cardboard Box
Posts: 497
| Re: R.N.S Jeep NukNukizer 715 3rd SCX10 Build |
10-11-2015, 10:36 PM | #7 |
RCC Addict Join Date: Apr 2015 Location: New Brunswick,Canada
Posts: 1,425
| Re: R.N.S Jeep NukNukizer 715 3rd SCX10 Build |
10-12-2015, 12:44 AM | #8 |
RCC Addict Join Date: Apr 2015 Location: New Brunswick,Canada
Posts: 1,425
| Re: R.N.S Jeep NukNukizer 715 3rd SCX10 Build
Be aware pic heavy....Explanation where and what size scale bolts were used and where..... Welcome to exhibit "C" Here is a complete set SCX10 scale bolts over 100 pieces 3 upper links from kit and use Traxxas ball eyelids 3 @ 3 x 30mm scale bolts. 4 @ 3 x 25mm scale bolts for lower links and shocks..Not sure if these holes on the front SSD axles will be used and since I bought extra bolts well i plug them up... So I cover them up with 3 x 6mm scale bolts.. A little grease doesn't hurt just in case..Get it case like in tranny case.lol Since i didn't have a spur gear cover why not do the spur gear and mount with 3 x 6mm scale bolts so you can see it... and then the put side of the tranny using 3 x 18mm scale bolts... again use the Traxxas 3 x 6mm washers on the motor mounts...Again great scale bolts but the bottom of the head should be like 1mm bigger so i wouldn't have to use washers... oh ya used a brand new 20T pinion 87t HD metal spur gear and Hobbyking 45Turn brushed motor bought 2 @ 10.00 each Last edited by rustneversleeps; 10-12-2015 at 01:02 AM. |
10-13-2015, 09:43 AM | #9 |
RCC Addict Join Date: Apr 2015 Location: New Brunswick,Canada
Posts: 1,425
| Re: R.N.S Jeep NukNukizer 715 3rd SCX10 Build I'm there right now looking for paint and the jeep Nuks are out of stock,didn't last long...Now just wondering what colors to use. Pearl or basic for a scale look appearance... Last edited by rustneversleeps; 10-13-2015 at 09:46 AM. |
10-13-2015, 02:15 PM | #10 |
Newbie Join Date: Sep 2011 Location: Australia
Posts: 22
| Re: R.N.S Jeep NukNukizer 715 3rd SCX10 Build
Keen to see how this build pans out ;)
|
10-13-2015, 07:54 PM | #11 |
RCC Addict Join Date: Apr 2015 Location: New Brunswick,Canada
Posts: 1,425
| Re: R.N.S Jeep NukNukizer 715 3rd SCX10 Build
I'm at a road block right now.I have vanquish scx frame servo mount #VPS07330.Web site says 12.3 Wheel base.What I'm building it's going to be 12.00 wheel base,which is 3/4 difference.Does any body know if this will still fit my wheel base of 12.00..... |
10-14-2015, 03:11 PM | #12 |
Pebble Pounder Join Date: Aug 2008 Location: indiana stix
Posts: 132
| Re: R.N.S Jeep NukNukizer 715 3rd SCX10 Build
yes, that will still work.the 12" wb will come into play when you get to the actual suspension links.the lateral link(from the vp frame mount to the axle) will be the same length regardless of wb, since it locates the axle side to side in the frame.you will just have to do some homework to get the correct length links to get to 12" wb. hope this helps?
|
10-14-2015, 11:21 PM | #13 |
Rock Crawler Join Date: Oct 2013 Location: The Netherlands
Posts: 538
| Re: R.N.S Jeep NukNukizer 715 3rd SCX10 Build
Looks great so far. I subscribed. Verstuurd vanaf mijn G708 Oc met Tapatalk |
10-15-2015, 12:01 AM | #14 | |
RCC Addict Join Date: Apr 2015 Location: New Brunswick,Canada
Posts: 1,425
| Re: R.N.S Jeep NukNukizer 715 3rd SCX10 Build Quote:
| |
10-15-2015, 12:08 AM | #15 |
RCC Addict Join Date: Apr 2015 Location: New Brunswick,Canada
Posts: 1,425
| Re: R.N.S Jeep NukNukizer 715 3rd SCX10 Build Hey thank.Getting really excited about this build to.it will be slow build take my time build,take a break build,forget about it for 2 day build ....And i hope you like heavy pics cause picture are are more then a thousands words and i hate typing. Last edited by rustneversleeps; 10-15-2015 at 07:51 AM. Reason: word |
10-15-2015, 12:12 AM | #16 |
Rock Crawler Join Date: Oct 2013 Location: The Netherlands
Posts: 538
| Re: R.N.S Jeep NukNukizer 715 3rd SCX10 Build
As long I have fast Internet on my tablet, while going to work by train, heavy pictures are no problem Verstuurd vanaf mijn G708 Oc met Tapatalk |
10-15-2015, 12:14 AM | #17 |
Rock Crawler Join Date: Oct 2013 Location: The Netherlands
Posts: 538
| Re: R.N.S Jeep NukNukizer 715 3rd SCX10 Build
I really like the scale bolts. Send from my Colorfly G708 phablet. |
10-15-2015, 12:48 AM | #18 | |
RCC Addict Join Date: Apr 2015 Location: New Brunswick,Canada
Posts: 1,425
| Re: R.N.S Jeep NukNukizer 715 3rd SCX10 Build Quote:
YA I bought them from Lockeduprc they have all kinds of good stuff. Last edited by rustneversleeps; 10-15-2015 at 12:51 AM. | |
10-15-2015, 02:54 PM | #19 |
RCC Addict Join Date: Apr 2015 Location: New Brunswick,Canada
Posts: 1,425
| Re: R.N.S Jeep NukNukizer 715 PT 2 SCX10 Build
Here the axles and links all done up for now will see if i have to change things up as i go and i probably will. I'll say it again like somebody said on here i forget who,but this is like eye balling engineering...lol Here is a little teaser with the Nuk with Pitbull growler 2.2,I'm thinking nice and low. NOT,they look cool stuff under there... they might seem big for 2.2 but looks cool,I do have 4 different options for tires later on in the build... Last edited by rustneversleeps; 10-15-2015 at 02:58 PM. Reason: piics |
10-15-2015, 03:53 PM | #20 |
I wanna be Dave Join Date: May 2015 Location: Moving
Posts: 2,580
| Re: R.N.S Jeep NukNukizer 715 3rd SCX10 Build
Man this thing is coming together awesomely. I really need to get my hands on one of these bodies. Love that you're going with 2.2s. Fits perfect with the size of the wheel arches.
|
R.N.S Jeep NukNukizer 715 3rd SCX10 Build - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
C2 Custom Axial Jeep Nukizer 715 | dna4engr | 1.9 Scale Rigs | 44 | 09-24-2018 08:02 AM |
Quickie Build: my 2nd FJ SCX10 | AKbash57 | Axial SCX-10 | 27 | 01-24-2015 11:56 AM |
Project JEEP Nukizer 715 Concept | Senior Latya | 1.9 Scale Rigs | 22 | 03-28-2012 12:12 PM |
Jeep Nukizer 715 Concept | DunkinMcNut | Micro Scale Rigs | 15 | 07-23-2010 09:23 AM |
| |