axial Interior kit

[s102000]

Has anyone got the the axial Interior kit to fit on any other bodies other than axials scx10 truck body? Pic`s if you have them!

[s102000]

wow thanks for all the help!!!!

[spoo76]

Its only been 2 days. Maybe no one has your answer?
Probably not, clearly the rest of the world has something personal against you and are all hiding the info from you... jk
I know Ive seen a thread on it but cant find it. try searching some. I did however come across this which may not help anyone with a honcho ... IMO its expensive
Team3six Honcho interior kit.

[Brandon]

With a little work you can get it to fit lots of different bodies. Direct bolt in, just the CF100 it was designed around.

[team3six]

Originally Posted by spoo76

Its only been 2 days. Maybe no one has your answer?
Probably not, clearly the rest of the world has something personal against you and are all hiding the info from you... jk
I know Ive seen a thread on it but cant find it. try searching some. I did however come across this which may not help anyone with a honcho ... IMO its expensive
Team3six Honcho interior kit.

Expensive? I purchased the styrene, I did all the work for you by putting it together, Its built to fit the honcho and allow the body to go on without it getting destroyed, Designed to look like the Tacoma interior, Comes with the dash decal of the Tacoma interior, floors are carpeted, and is made to fit as a direct bolt on to fit around your transmission and hold your electronics and battery and while keeping them dry for some wet trails. and it comes with the screws and rear mount. Plus I sell scale products on my website.

[country_crawler]

Originally Posted by team3six

Expensive? I purchased the styrene, I did all the work for you by putting it together, Its built to fit the honcho and allow the body to go on without it getting destroyed, Designed to look like the Tacoma interior, Comes with the dash decal of the Tacoma interior, floors are carpeted, and is made to fit as a direct bolt on to fit around your transmission and hold your electronics and battery and while keeping them dry for some wet trails. and it comes with the screws and rear mount. Plus I sell scale products on my website.

The interior kit is quite nice. It is a little expensive at $70, I can't afford that, I would rather build my own and have fun doing it, but I wish I could afford it cause they are nice.

[BGGruff]

I put one in my TR Courier and made it work.
I combined that with styrene to make a full interior.
Check out the 3rd page.

BGGruff's TR (Stage 2 Courier)

[team3six]

Originally Posted by country_crawler

The interior kit is quite nice. It is a little expensive at $70, I can't afford that, I would rather build my own and have fun doing it, but I wish I could afford it cause they are nice.

I'm all good for anyone wanting to make it themselves. Not everyone has the time or patience to make their own and make it look nice.
if you can do it your self, then great! But for the price its a direct bolt in and it does take time to build them. check out my thread and you'll see the finished product.
Team3six's Terminator Honcho

[WrenchHead]

I built one and added it to my Hocho build. Here are a few pix for you.

Thanks Bill. I try. lol best I can do. Got a bit more done for your viewing pleasure. Here are a few close-ups and some completed pics.

Dash and steering wheel work.

Assembled and I just got a new idea !! be back in abit. holding..........

Had to stop off and graba 12 pak. And I will toss my RC in the cab while I'm in the store.lol

Ahh My idea. Here it is. A piece of a black rag I have in the garage. Whaa La. Instant Carpet.
Used some spay adheasive to secure.Works for me.



So here is the mounted up in the cab pics.Here you all go.

[country_crawler]

Dumb question, where can I get styrene at and what do I use to bond it together?

[chicostaxxs007]

holy s**t that is sweet!!

[spoo76]

Originally Posted by team3six

Expensive? I purchased the styrene, I did all the work for you by putting it together, Its built to fit the honcho and allow the body to go on without it getting destroyed, Designed to look like the Tacoma interior, Comes with the dash decal of the Tacoma interior, floors are carpeted, and is made to fit as a direct bolt on to fit around your transmission and hold your electronics and battery and while keeping them dry for some wet trails. and it comes with the screws and rear mount. Plus I sell scale products on my website.

I didnt say it wasnt quality or that the price is unfair
$70 is a decent chunck of change to many people these days
and as you said. if you dont want,dont have the time or skill to do the work its well worth it (and i agree)

[Brandon]

Originally Posted by WrenchHead

I built one and added it to my Hocho build. Here are a few pix for you.

Nice work! That looks killer in there

[rc-Bitz]

Do you have more pictures showing your interior? Was there much modification from the CF-100 interior kit?

[spoo76]

more options
not exactly what you were asking but this will be helpful to those that search " interior "

the new Proline interior and floor plan look nice



Proline interior and floorpan



also there is this option
CGR blazer interior cut out to fit a Proline blazer
The Redneck