maxx shaft adapters

[lifted_xj]

Seen a guy who made the adapters for the maxi shafts to bolt to the axles but can't seem to find em again can anyone help lead me in right direction thanks

[yoda316]

wheely king pinions will work for what you need

[TSK]

Originally Posted by lifted_xj

Seen a guy who made the adapters for the maxi shafts to bolt to the axles but can't seem to find em again can anyone help lead me in right direction thanks

Crawler Innovations had them. But just do Jason's "maxx shafts made easy mod" Super simple, and if you are going to do Maxx shafts on the trans end, you'll have to do this mod anyways (unless you have CI's 6mm outputs)

Originally Posted by yoda316

wheely king pinions will work for what you need

The only problem with going WK pinion is you can't use the OD/UD gear set.

[lifted_xj]

Im running a summit trans so no need for Tranny end have to look up jason mod

[lifted_xj]

Looked up jason mod and that's what im currently running but want and adapter so I can use stock maxi shaft if one breaks on the trail

[NGreen]

There's a ton of good info in this thread: RS4 pinion and ring gear set-up...

[NGreen]

Originally Posted by monkeyracer

So, this:



HPI-86329

Plus this:


HPI - 82020

equals inexpensive steel overdrive gears for the front of an AX10 (36/14)?

and 2 sets would be fine for the wk, but it would be a little faster right?

That means for $31 bucks shipped (3 gear sets, 1 input shaft), I can have overdrive for the AX10 comp rig, and slightly faster, more durable r&p for the WK scaler? ($43 if I want to convert the WK to 5mm shafts.)

Sweet!

Sums it up.

[lifted_xj]

still not what im looking for but it helps