|
| LinkBack | Thread Tools | Display Modes |
07-01-2011, 10:52 PM | #1 |
Rock Stacker Join Date: Aug 2010 Location: Gate City VA
Posts: 57
| stock driveshafts problems always !!!!
i love my scx10 but when i get really into wheeling it a drive shaft pops off they seem to be tight when i put them back on any way to help me out hear.... i know someone prob has already posted this more than likly...can i get some nice advice
|
Sponsored Links | |
07-01-2011, 11:26 PM | #2 |
I wanna be Dave Join Date: Jul 2009 Location: Rancho Relaxo. California. USA. Earth.
Posts: 3,292
|
Search around there's definitely some ideas. But which part are you talking about? If the plastic yoke ears keep popping off, possibly the driveshaft rings can help. If the metal yoke keeps coming off the pinion or tranny end, its always worked for me to cut down some m3 cap screws and use 2 per yoke. Along with a dab, and I do mean a dab of red loctite. The 2.5mm drive on the cap head allows one to really put some torque down on it and a screw per side really holds it on. |
07-02-2011, 07:58 AM | #3 |
Quarry Creeper Join Date: Jun 2011 Location: IE
Posts: 407
|
I like to use traxxas shafts and theire ss yours.
|
07-02-2011, 10:11 AM | #4 |
Quarry Creeper Join Date: Sep 2010 Location: Gulf Coast
Posts: 214
|
Loctite is all i used & never had the problem since! |
07-02-2011, 12:57 PM | #5 |
Newbie Join Date: Jun 2011 Location: Kentucky
Posts: 24
|
loctite with the 24hr cure time worked great for me. no issues since.
|
07-02-2011, 10:05 PM | #6 |
Rock Stacker Join Date: Aug 2010 Location: Gate City VA
Posts: 57
|
yeah its the metal yoke that keeps workin itself loose i heard about doin puttin to set screws in just hadnt yet
|
Thread Tools | |
Display Modes | |
| |