RCCrawler Forums

RCCrawler Forums (http://www.rccrawler.com/forum/)
-   Axial SCX-10 (http://www.rccrawler.com/forum/axial-scx-10/)
-   -   Let's see those 2.2 Scx10's (http://www.rccrawler.com/forum/axial-scx-10/361595-lets-see-those-2-2-scx10s.html)

raw111 01-22-2012 06:26 PM

Let's see those 2.2 Scx10's
 
So i really want to pick up an scx10 as they are a nice looking truck, But i am on the fence as i prefer the look/ground clearance of 2.2's So Show them off! If you can / feel like it please list mod's to get to 2.2 height. I would really like to do a 2.2 scx10 with a panel truck body. So 2.2's unless your running some BIG 1.9's Thanks guys!

btoungette 01-22-2012 06:40 PM

Re: Let's see those 2.2 Scx10's
 
Here is where someone would post the "why don't you try searching" response, but I have to say that I searched earlier for "2.2" in the SCX-10 section and it can up with no matches. Hard to believe, but I tried several times. So, "try searching" would do you no good.

However, this has been debated and documented with pictures several times. I'd advise starting in the SCX-10 picture thread. Start at the end and work your way backwards. There are a few SCX-10 rigs with 2.2 wheels/tires. Also, look in the 2.2 picture thread. Try Google; I found some images by searching "2.2 SCX-10" there.

I know this has been covered, but I can't direct you because I can't find the threads.




*Not sure if this response is 'bill' approved

ridepate 01-22-2012 08:53 PM

Re: Let's see those 2.2 Scx10's
 
Dingo 2.2. The Dingo body is closer to 1/8 scale, IMO, so 2.2's look really nice sans the flairs.

http://i39.tinypic.com/fbdlw4.jpg

snohiker 01-22-2012 09:10 PM

Re: Let's see those 2.2 Scx10's
 
1 Attachment(s)
still just a poser waiting on a radio but its cool snows to deep outside gives me more time for mods

Stuck 01-22-2012 09:35 PM

Re: Let's see those 2.2 Scx10's
 
Here is a pic of mine before the tube and body work

.http://www.rccrawler.com/forum/membe...1720-18555.jpg

AX10wannabe 01-22-2012 09:59 PM

Re: Let's see those 2.2 Scx10's
 
my scx10 honcho. body is trimmed a lot.
http://i978.photobucket.com/albums/a...9/HPIM1455.jpg
front shot
http://i978.photobucket.com/albums/a...9/HPIM1456.jpg
flex shot
http://i978.photobucket.com/albums/a...9/HPIM1262.jpg

its pretty easy to to run 2.2's just need to be prepared to trim the body or make a small lift to fit them. if you search enough you will find scx10 builds. if its stock honcho's and dingo's with 2.2 then there's a few around, if your talking scx10 chassis based with 2.2's then there's..check out the 2.2 scale rig section.

vistataco 01-22-2012 11:04 PM

Re: Let's see those 2.2 Scx10's
 
- 110mm Hot Racing coilovers
- ProLine 2.2 tires
- Axial 2.2 black wheels
- JunFac carbon steel drive shafts

http://inlinethumb13.webshots.com/46...600x600Q85.jpg
http://inlinethumb36.webshots.com/48...600x600Q85.jpg
http://inlinethumb61.webshots.com/71...600x600Q85.jpg

Erbing 01-22-2012 11:32 PM

Re: Let's see those 2.2 Scx10's
 
mudslingers look good since their not very big.
http://i5.photobucket.com/albums/y17...1/DSC02690.jpg

RusT808 01-23-2012 01:07 AM

Re: Let's see those 2.2 Scx10's
 
http://i646.photobucket.com/albums/u...8/DSC00473.jpg
http://i646.photobucket.com/albums/u...8/DSC00471.jpg
http://i646.photobucket.com/albums/u...8/DSC00470.jpg

raw111 01-23-2012 06:42 AM

Re: Let's see those 2.2 Scx10's
 
Thanks guy's perfect, Do you find you are breaking more parts? or is it holding up to larger tires fine? thanks!

ceedawwg 01-23-2012 06:52 AM

Re: Let's see those 2.2 Scx10's
 
3 Attachment(s)
My 2.2...widened, extended and lifted .

Lowerslowerscaler 01-23-2012 10:55 AM

I'll play.
My tube bed honcho with the droop setup on 2.2's
http://img.tapatalk.com/aefc5c02-9e89-be2d.jpg
http://img.tapatalk.com/aefc5c02-9ec1-e18f.jpg
http://img.tapatalk.com/aefc5c02-9ee2-65c3.jpg
And a little poser flex shot. Hey at least it's rock, not a soda can. LOL
http://img.tapatalk.com/aefc5c02-9f51-62b6.jpg

johnnyh66 01-23-2012 02:26 PM

Re: Let's see those 2.2 Scx10's
 
2.2 Mud Slingers
http://i860.photobucket.com/albums/a...28-2011552.jpg
http://i860.photobucket.com/albums/a...28-2011090.jpg

2.2 ProLine Super Swampers with longer wheelbase
http://i860.photobucket.com/albums/a...9-24164918.jpg
http://i860.photobucket.com/albums/a...9-24165159.jpg

2.2 PitBull Rock Beast, long wheel base, Junfac wideners "thumbsup"
http://i860.photobucket.com/albums/a...olar_A02-1.jpg
http://i860.photobucket.com/albums/a...23114111-1.jpg
http://i860.photobucket.com/albums/a...ug/9_25_09.jpg
http://i860.photobucket.com/albums/a...ug/9_25_05.jpg
http://i860.photobucket.com/albums/a...ug/9_25_04.jpg

Erbing 01-23-2012 05:36 PM

Re: Let's see those 2.2 Scx10's
 
One more.
http://i5.photobucket.com/albums/y17...1/DSC03413.jpg

Cave Dave 01-23-2012 06:00 PM

Re: Let's see those 2.2 Scx10's
 
http://www.rccrawler.com/forum/axial...cx-honcho.html
I run 2.2's on mine,there's some pics and info on what I have done to the truck to run them in my build thread.

RCT 02-03-2012 09:46 PM

Re: Let's see those 2.2 Scx10's
 
Quote:

Originally Posted by Erbing (Post 3525820)

What wheels are these?!
I gotta have them. :shock:

old man 52 02-03-2012 09:55 PM

Re: Let's see those 2.2 Scx10's
 
1 Attachment(s)
Here ya go.

Erbing 02-03-2012 10:09 PM

Re: Let's see those 2.2 Scx10's
 
Quote:

Originally Posted by RCT (Post 3545746)
What wheels are these?!
I gotta have them. :shock:


They are rc4wd super narrow beadlocks. they come with red rings, but I painted them black.

Mud Puppy 02-03-2012 10:11 PM

Re: Let's see those 2.2 Scx10's
 
2.2 flat-irons. Easier fit than most 2.2 since they are on the small side, but you get the extra width.

http://i659.photobucket.com/albums/u...r/IMG_0033.jpg

http://i659.photobucket.com/albums/u...aler/Hope1.jpg

ceedawwg 02-04-2012 01:53 PM

Re: Let's see those 2.2 Scx10's
 
5 Attachment(s)
Quote:

Originally Posted by ceedawwg (Post 3524602)
My 2.2...widened, extended and lifted .

Changed things up a bit...


All times are GMT -6. The time now is 07:20 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com