RCCrawler Forums

jdmguy760 · 07-09-2011, 11:28 PM

LOTS OF PICS 56K ASLO 3 VIDS BEWARE LOL

SCX10 HONCHO KIT 12.3 W/B

CASTLE CREATIONS SV2 ESC

CASTLE CREATIONS CASTLE LINK

CASTLE CREATIONS BEC SET @ 6 VOLTS

TEAM TEKEN 35T MACHINE WOUND MOTOR

RX AND TX FUTABA 3PMX AND 603FF

TURNIGY 5000 MAH 7.4 2 CELL 30 BURST LIPO

HITEC 645 MG SERVO

HAND BROS CMS KIT

R2J REAR 4 LINK TRUSS

PROLINE SCALER SHOCKS 95MM

RC4WD ROK LOX 1.9

3 RACING WINCH

AXIAL NVS LIGHTING KIT 15 LEDS FROM IT

RPM LIGHT BAR WITH 6 LEDS WITH 9 VOLT BATTERY TOTAL OF 21 LEDS!!!

MIP DRIVE SHAFTS

STOCK WHEELS WIEGHTED AT 3.75 OUNCES FRONT REAR IS 3 OUNCES ALSO SPARE TIRE IN BED

I ALSO TOOK THE PROLINE FOAMS AND USED THEM IN THE ROK LOXS IMO BETTER GRAB FROM TIRE

PROLINE SCALE ACCESSORIES ALONG WITH SOME FROM EBAY

LEAVE ANY COMMENTS PLEASE

http://www.youtube.com/watch?v=8yaV0JWJbRY
http://www.youtube.com/watch?v=TU1HD0_vco4
http://www.youtube.com/watch?v=ZZlodSOqFxY

bro_die · 07-14-2011, 07:25 AM

is this body stock off the box? Ive been wanting one of these but i dont know wehre to find them.

1SLOWSS · 07-14-2011, 03:35 PM

Good looking Honcho!!

federally · 07-14-2011, 05:29 PM

Great looking truck you just need to hide the wires to that light bar

jdmguy760 · 07-14-2011, 06:30 PM

ya its the stock body that comes with the honcho kit and thanks guys, ya i know the wires kinda suck but i think i can fix it with a roof rack maybe?

federally · 07-14-2011, 06:38 PM

Quote:

Originally Posted by jdmguy760

ya its the stock body that comes with the honcho kit and thanks guys, ya i know the wires kinda suck but i think i can fix it with a roof rack maybe?

Bundle them together and wrap em with somethong then stick a roof rack over them and they'll disapear.

jdmguy760 · 07-14-2011, 06:40 PM

ya i think ill try that also i want another body but having trouble finding them with headlight leds is that something that has to be custom sorry i am a bit of a newb been over 10 years since i been in this lol

jammindriver · 07-14-2011, 10:19 PM

Talk to me about that NVS lighting system...do you like it? It does turn signals and stuff, right? Do you have (or can you do) reverse lights with it that come on when making?

jdmguy760 · 07-14-2011, 10:26 PM

well my nvs system kinda glitched when i set it up i dont know if it was messed up to begain with or that i cut the power wire cause im running it threw a bec so idk
ive seen other ones and they seem to work fine and the turn signals work fine i plugged mine into the aux ports so they are on constant the NVS kit does not have a reverse feature but when brakes are on the brake lights get brighter as well as headlights get brigher as gas is applyed

jammindriver · 07-14-2011, 10:32 PM

Okay, cool, thanks. Looks good btw

jdmguy760 · 07-14-2011, 10:33 PM

no prob and thanks i still got some work to do but shell get there

jdmguy760 · 04-15-2012, 12:48 AM

SCX10 BACKYARD ALL POWER - YouTube
another lil vid after changing course up a lil not muched changed still cant figure out why its wines so loud i tryed setting mesh tight loose in between its the same any ideas
also tom ill have another new vid of the rest of course keep in mind it dont change a super lot as being handicapped hard to do what i need lol but bare with me i try

Tonysmini · 04-15-2012, 02:36 AM

Mine whined until I loosened the three motor plate screws slightly. A dab of threadlock on them and it's almost silent now, so much so that everyone comments on how quiet it is.

jdmguy760 · 04-15-2012, 11:58 AM

tony ima try that its almost to the point where its kinda annoying lol thanks for that tip ill let you know how it turns out

jdmguy760 · 04-15-2012, 01:58 PM

scx10 course change up - YouTube
another video from other day

Tonysmini · 04-15-2012, 04:18 PM

I loosened mine about 30 to 45', that was enough to silence mine. Now I do it by habit and my SCX and my Wraith gearboxes barely make a whisper.

jdmguy760 · 04-16-2012, 02:50 PM

well tony i tryed to loosing it some and used some lock tight the sound is still there ive checked and greased everything idk maybe mine is like a 1:1 truck they each have there own sound lmao

Tonysmini · 04-17-2012, 09:05 AM

Is it your gearbox or the axles? Sometimes the diff rings can be very noisy, or you may just have a loud motor.

I tend to be quite choosy with mine, even down to chucking the gearbox internals in the dishwasher and cleaning and re-oiling bearings just to keep them quiet.

jdmguy760 · 04-17-2012, 12:21 PM

well the sound is deff the gearbox area it could be motor maybe ill try a diff one and see but its just odd ive watched alot of videos and mine just seems to be louder

tybalt6691 · 04-17-2012, 06:39 PM

I like the light kits, very detailed, who makes the light bar?

07-09-2011, 11:28 PM	#1
jdmguy760 Rock Crawler Join Date: Jul 2011 Location: palm desert (southern cali) Posts: 850	Jdmguys desert honcho LOTS OF PICS 56K ASLO 3 VIDS BEWARE LOL SCX10 HONCHO KIT 12.3 W/B CASTLE CREATIONS SV2 ESC CASTLE CREATIONS CASTLE LINK CASTLE CREATIONS BEC SET @ 6 VOLTS TEAM TEKEN 35T MACHINE WOUND MOTOR RX AND TX FUTABA 3PMX AND 603FF TURNIGY 5000 MAH 7.4 2 CELL 30 BURST LIPO HITEC 645 MG SERVO HAND BROS CMS KIT R2J REAR 4 LINK TRUSS PROLINE SCALER SHOCKS 95MM RC4WD ROK LOX 1.9 3 RACING WINCH AXIAL NVS LIGHTING KIT 15 LEDS FROM IT RPM LIGHT BAR WITH 6 LEDS WITH 9 VOLT BATTERY TOTAL OF 21 LEDS!!! MIP DRIVE SHAFTS STOCK WHEELS WIEGHTED AT 3.75 OUNCES FRONT REAR IS 3 OUNCES ALSO SPARE TIRE IN BED I ALSO TOOK THE PROLINE FOAMS AND USED THEM IN THE ROK LOXS IMO BETTER GRAB FROM TIRE PROLINE SCALE ACCESSORIES ALONG WITH SOME FROM EBAY LEAVE ANY COMMENTS PLEASE http://www.youtube.com/watch?v=8yaV0JWJbRY http://www.youtube.com/watch?v=TU1HD0_vco4 http://www.youtube.com/watch?v=ZZlodSOqFxY Last edited by jdmguy760; 07-09-2011 at 11:33 PM. Reason: FORGOT A PIC

04-15-2012, 12:48 AM	#12
jdmguy760 Rock Crawler Join Date: Jul 2011 Location: palm desert (southern cali) Posts: 850	Re: Jdmguys desert honcho SCX10 BACKYARD ALL POWER - YouTube another lil vid after changing course up a lil not muched changed still cant figure out why its wines so loud i tryed setting mesh tight loose in between its the same any ideas also tom ill have another new vid of the rest of course keep in mind it dont change a super lot as being handicapped hard to do what i need lol but bare with me i try

04-15-2012, 02:36 AM	#13
Tonysmini Quarry Creeper Join Date: Aug 2011 Location: Spalding, Lincs, UK Posts: 235	Re: Jdmguys desert honcho Mine whined until I loosened the three motor plate screws slightly. A dab of threadlock on them and it's almost silent now, so much so that everyone comments on how quiet it is.

04-15-2012, 11:58 AM	#14
jdmguy760 Rock Crawler Join Date: Jul 2011 Location: palm desert (southern cali) Posts: 850	Re: Jdmguys desert honcho tony ima try that its almost to the point where its kinda annoying lol thanks for that tip ill let you know how it turns out

04-15-2012, 01:58 PM	#15
jdmguy760 Rock Crawler Join Date: Jul 2011 Location: palm desert (southern cali) Posts: 850	Re: Jdmguys desert honcho scx10 course change up - YouTube another video from other day

07-14-2011, 07:25 AM	#2
bro_die Quarry Creeper Join Date: Nov 2010 Location: right here! Posts: 300	is this body stock off the box? Ive been wanting one of these but i dont know wehre to find them.

07-14-2011, 03:35 PM	#3
1SLOWSS Rock Stacker Join Date: Jan 2010 Location: Kingsport, TN Posts: 76	Good looking Honcho!!

07-14-2011, 05:29 PM	#4
federally Quarry Creeper Join Date: Oct 2010 Location: Grandview, IA Posts: 356	Great looking truck you just need to hide the wires to that light bar

07-14-2011, 06:30 PM	#5
jdmguy760 Rock Crawler Join Date: Jul 2011 Location: palm desert (southern cali) Posts: 850	ya its the stock body that comes with the honcho kit and thanks guys, ya i know the wires kinda suck but i think i can fix it with a roof rack maybe?

07-14-2011, 06:40 PM	#7
jdmguy760 Rock Crawler Join Date: Jul 2011 Location: palm desert (southern cali) Posts: 850	ya i think ill try that also i want another body but having trouble finding them with headlight leds is that something that has to be custom sorry i am a bit of a newb been over 10 years since i been in this lol

07-14-2011, 10:19 PM	#8
jammindriver Pebble Pounder Join Date: May 2011 Location: Bettendorf, IA Posts: 199	Talk to me about that NVS lighting system...do you like it? It does turn signals and stuff, right? Do you have (or can you do) reverse lights with it that come on when making?

07-14-2011, 10:26 PM	#9
jdmguy760 Rock Crawler Join Date: Jul 2011 Location: palm desert (southern cali) Posts: 850	well my nvs system kinda glitched when i set it up i dont know if it was messed up to begain with or that i cut the power wire cause im running it threw a bec so idk ive seen other ones and they seem to work fine and the turn signals work fine i plugged mine into the aux ports so they are on constant the NVS kit does not have a reverse feature but when brakes are on the brake lights get brighter as well as headlights get brigher as gas is applyed

07-14-2011, 10:32 PM	#10
jammindriver Pebble Pounder Join Date: May 2011 Location: Bettendorf, IA Posts: 199	Okay, cool, thanks. Looks good btw

07-14-2011, 10:33 PM	#11
jdmguy760 Rock Crawler Join Date: Jul 2011 Location: palm desert (southern cali) Posts: 850	no prob and thanks i still got some work to do but shell get there

04-15-2012, 04:18 PM	#16
Tonysmini Quarry Creeper Join Date: Aug 2011 Location: Spalding, Lincs, UK Posts: 235	Re: Jdmguys desert honcho I loosened mine about 30 to 45', that was enough to silence mine. Now I do it by habit and my SCX and my Wraith gearboxes barely make a whisper.

Sponsored Links

04-16-2012, 02:50 PM	#17
jdmguy760 Rock Crawler Join Date: Jul 2011 Location: palm desert (southern cali) Posts: 850	Re: Jdmguys desert honcho well tony i tryed to loosing it some and used some lock tight the sound is still there ive checked and greased everything idk maybe mine is like a 1:1 truck they each have there own sound lmao

04-17-2012, 09:05 AM	#18
Tonysmini Quarry Creeper Join Date: Aug 2011 Location: Spalding, Lincs, UK Posts: 235	Re: Jdmguys desert honcho Is it your gearbox or the axles? Sometimes the diff rings can be very noisy, or you may just have a loud motor. I tend to be quite choosy with mine, even down to chucking the gearbox internals in the dishwasher and cleaning and re-oiling bearings just to keep them quiet. Last edited by Tonysmini; 04-17-2012 at 09:07 AM.

04-17-2012, 12:21 PM	#19
jdmguy760 Rock Crawler Join Date: Jul 2011 Location: palm desert (southern cali) Posts: 850	Re: Jdmguys desert honcho well the sound is deff the gearbox area it could be motor maybe ill try a diff one and see but its just odd ive watched alot of videos and mine just seems to be louder

04-17-2012, 06:39 PM	#20
tybalt6691 Newbie Join Date: Mar 2012 Location: Gwinnett Posts: 42	Re: Jdmguys desert honcho I like the light kits, very detailed, who makes the light bar?

RCCrawler Forums

Thread: Jdmguys desert honcho