RCCrawler Forums

RCCrawler Forums (http://www.rccrawler.com/forum/)
-   Axial SCX-10 (http://www.rccrawler.com/forum/axial-scx-10/)
-   -   Clearance issue-servo and box (http://www.rccrawler.com/forum/axial-scx-10/372560-clearance-issue-servo-box.html)

07trd4x4 03-14-2012 02:40 PM

Clearance issue-servo and box
 
First it started with the dingo kit and I put the longer links on it to make it the longer wheel base.

1) done.. notch out a piece in the cross member

2) my receiver box is hitting my my links.

http://img.tapatalk.com/401e7b52-021e-7788.jpg

Why?!?!?!
Thanks in advance

Meatwad 03-14-2012 02:52 PM

Re: Clearance issue-servo and box
 
Well you put longer links on, things are going to change.

1. I removed the crossmember and made an L bracket from one side to support the front of the batt mount.

2. Relocate.

ScaleFreak93 03-14-2012 04:20 PM

Re: Clearance issue-servo and box
 
Is it under full compression of both sides at once that it hits or while flexing?

07trd4x4 03-14-2012 04:55 PM

Quote:

Originally Posted by ScaleFreak93 (Post 3629076)
Is it under full compression of both sides at once that it hits or while flexing?

I assume you are talking about the box supports
Under complete compression on both sides it hits. If I only compress on side it misses by a hair.

07trd4x4 03-14-2012 05:05 PM

Nice I put the shocks on the front of the hoop to change the height.

I think I solved my own problem. Lol

07trd4x4 03-14-2012 05:11 PM

Guess I will need longer shocks! Lol

Hmmm what to get

Dudeman 03-14-2012 06:02 PM

Re: Clearance issue-servo and box
 
Am I missing something here? Wouldn't it be much simpler to just move the rec. box?

If it's only hitting at full compression, bumpstops work wonders as well.


All times are GMT -6. The time now is 11:39 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com