Go Back   RCCrawler Forums > Scale Rigs Brand Specific Tech > Axial Brand Scale Rock Crawlers > Axial SCX-10
Loading

Notices

Thread: Scx10 going F350?

Reply
 
LinkBack Thread Tools Display Modes
Old 05-25-2012, 02:53 PM   #1
Newbie
 
Join Date: May 2012
Location: Vernon
Posts: 20
Default Scx10 going F350?

I'm looking for some help does the Tamiya F350 body fit ony the SCX10 chassis and if it does do i need to mmodify anything. If anyone has this combo done could you post some pics for me before i go harrass the guy at my hobby shop again. Thanks
Creeping Ghost is offline   Reply With Quote
Sponsored Links
Old 06-09-2012, 08:40 AM   #2
Newbie
 
Join Date: Jan 2012
Location: Denmark
Posts: 39
Default

Hola

Direct fit on a dingo - see my Ford rack





Sent from my iPhone using Tapatalk

Tuono_dk aka Jan @ Denmark
Tuono_dk is offline   Reply With Quote
Old 06-09-2012, 08:54 AM   #3
MODERATOR™
 
EeePee's Avatar
 
Join Date: Jul 2004
Location: Ohio
Posts: 18,928
Default Re: Scx10 going F350?

You'll have to bolt the two halves together, the bed to the cab. Then just drill holes in the right spot for the body posts. Otherwise, it lines up almost perfectly, if not spot on.
Attached Images
  
EeePee is offline   Reply With Quote
Old 06-09-2012, 12:22 PM   #4
Rock Crawler
 
Join Date: Aug 2011
Location: tri cities
Posts: 582
Default Re: Scx10 going F350?

They fit nice as in wheelbase but, they are a narrow body. The wheels will stick out almost completly past the wheel wells.
muddinscx is offline   Reply With Quote
Old 06-11-2012, 11:47 AM   #5
Rock Crawler
 
Join Date: Jul 2009
Location: Little Rock, Arkansas
Posts: 542
Default Re: Scx10 going F350?

Fits fine for me:




This pic shows how far the tires stick out from the wheelwells:
BadRockNoCookie is offline   Reply With Quote
Old 06-11-2012, 12:48 PM   #6
Rock Crawler
 
Join Date: Aug 2011
Location: tri cities
Posts: 582
Default Re: Scx10 going F350?

Quote:
Originally Posted by BadRockNoCookie View Post
Fits fine for me:




This pic shows how far the tires stick out from the wheelwells:
Like I said, sticks amost all the way out of the fender well. Not saying its a bad thing. Some people don't like that but, with the body the scx10 looks more scale (tire size to body higth).
muddinscx is offline   Reply With Quote
Old 06-11-2012, 01:17 PM   #7
Rock Crawler
 
Join Date: Jul 2009
Location: Little Rock, Arkansas
Posts: 542
Default Re: Scx10 going F350?

1.9 tires with this body are about the equivelent to the look of 44" - 48" tires on the 1:1 F350s.
BadRockNoCookie is offline   Reply With Quote
Old 06-11-2012, 02:29 PM   #8
RCC Addict
 
Join Date: Nov 2008
Location: Palm Coast, Florida
Posts: 1,273
Default Re: Scx10 going F350?

Quote:
Originally Posted by BadRockNoCookie View Post
1.9 tires with this body are about the equivelent to the look of 44" - 48" tires on the 1:1 F350s.

How did you mount the F350 body? I dont see any posts sticking out and I like that.
HDMM is offline   Reply With Quote
Old 06-11-2012, 06:25 PM   #9
Newbie
 
Join Date: May 2012
Location: Vernon
Posts: 20
Default Re: Scx10 going F350?

Thanks everybody the guy at my hobby shop is making bank on me. Now time to order my F350 body set cause I've butchered my honcho to death and beyond it's starting to look like it survived a knife fight
Creeping Ghost is offline   Reply With Quote
Old 06-11-2012, 06:30 PM   #10
Quarry Creeper
 
Join Date: May 2009
Location: pacific NW
Posts: 415
Default

For the 2 that posted pics, what class are they considered?

Sent from my PC36100 using Tapatalk 2
asian195 is offline   Reply With Quote
Old 06-11-2012, 06:34 PM   #11
Newbie
 
Join Date: May 2012
Location: Vernon
Posts: 20
Smile Re: Scx10 going F350?

I will post pictures later this week if overtime and car shopping doesn't kill me thanks again everybody for the help and killer pictures
Creeping Ghost is offline   Reply With Quote
Old 06-11-2012, 08:37 PM   #12
Rock Crawler
 
Join Date: Aug 2011
Location: tri cities
Posts: 582
Default Re: Scx10 going F350?

Quote:
Originally Posted by BadRockNoCookie View Post
1.9 tires with this body are about the equivelent to the look of 44" - 48" tires on the 1:1 F350s.
That's the problem with a lot of bodies. I have a jk with 4.2 tsl's which would be 42" in 1:1 and the are barley up to the window from the bottom of the door. Its not even close to scale. They look like they would be 31's at most in 1:1 compared to the body.
muddinscx is offline   Reply With Quote
Old 06-12-2012, 03:53 AM   #13
Newbie
 
Join Date: May 2012
Location: Vernon
Posts: 20
Default Re: Scx10 going F350?

Quote:
Originally Posted by muddinscx View Post
Like I said, sticks amost all the way out of the fender well. Not saying its a bad thing. Some people don't like that but, with the body the scx10 looks more scale (tire size to body higth).
Are you running the dingo or honcho scx10
Creeping Ghost is offline   Reply With Quote
Old 06-12-2012, 01:02 PM   #14
Rock Crawler
 
Join Date: Jul 2009
Location: Little Rock, Arkansas
Posts: 542
Default Re: Scx10 going F350?

Quote:
Originally Posted by asian195 View Post
For the 2 that posted pics, what class are they considered?

Sent from my PC36100 using Tapatalk 2
I'm not sure.
BadRockNoCookie is offline   Reply With Quote
Old 06-12-2012, 01:07 PM   #15
Rock Crawler
 
Join Date: Jul 2009
Location: Little Rock, Arkansas
Posts: 542
Default Re: Scx10 going F350?

Quote:
Originally Posted by HDMM View Post
How did you mount the F350 body? I dont see any posts sticking out and I like that.
For the front, I cut and sanded the knob on the top of the body posts flat at the widest part and then gorilla glued a piece of flat plastic to the top of them. Then I put velcro on them. For the rear, I didn't use body posts, I just gorilla glued a piece of flat plastic to the top of the shock hoop where the post is supposed to go, then put velcro on that flat piece of plastic. Then just put strips of velcro on the underside of the body where you want it to attach. That holds the body on great.
BadRockNoCookie is offline   Reply With Quote
Old 06-12-2012, 02:57 PM   #16
MODERATOR™
 
EeePee's Avatar
 
Join Date: Jul 2004
Location: Ohio
Posts: 18,928
Default Re: Scx10 going F350?

Quote:
Originally Posted by asian195 View Post
For the 2 that posted pics, what class are they considered?
I have no idea either cause I'm not a scaler nerd, I mean competitor. I'd guess class 1, but it may fall into class 2 for some reason I'm unaware of.
EeePee is offline   Reply With Quote
Old 06-12-2012, 04:22 PM   #17
RCC Addict
 
Join Date: Dec 2007
Location: Moncton, NB, Canada
Posts: 1,962
Default Re: Scx10 going F350?

Quote:
Originally Posted by EeePee View Post
I have no idea either cause I'm not a scaler nerd, I mean competitor. I'd guess class 1, but it may fall into class 2 for some reason I'm unaware of.
I'd say Class 2 since the tires are taller than 4.19" and they're sticking almost all the way past the fenders. Class 1 needs to have at least 1/2 the tread covered. I don't compete, but I read the rules
canadianbacon is offline   Reply With Quote
Old 06-12-2012, 04:27 PM   #18
MODERATOR™
 
EeePee's Avatar
 
Join Date: Jul 2004
Location: Ohio
Posts: 18,928
Default Re: Scx10 going F350?

Quote:
Originally Posted by canadianbacon View Post
I don't compete, but I read the rules
Waste of time, rules are made to be broken. And scaler comps seem silly.
EeePee is offline   Reply With Quote
Old 06-13-2012, 07:27 AM   #19
Newbie
 
Join Date: May 2012
Location: Vernon
Posts: 20
Default Re: Scx10 going F350?

Quote:
Originally Posted by EeePee View Post
You'll have to bolt the two halves together, the bed to the cab. Then just drill holes in the right spot for the body posts. Otherwise, it lines up almost perfectly, if not spot on.
Are you running the honcho or dingo scx10
Creeping Ghost is offline   Reply With Quote
Old 06-13-2012, 08:14 AM   #20
MODERATOR™
 
EeePee's Avatar
 
Join Date: Jul 2004
Location: Ohio
Posts: 18,928
Default Re: Scx10 going F350?

Original SCX kit.
EeePee is offline   Reply With Quote
Reply



Scx10 going F350? - Similar Threads
Thread Thread Starter Forum Replies Last Post
Sam's (TraxFD) Axial SCX10 F350... justinart24 Scale Videos! 1 05-25-2012 03:04 PM
F350 highlift to SCX10 mudrinner4ever General Scale Talk 6 12-22-2011 07:43 PM
F350 Revo body on a SCX10 MoonyJohn Axial SCX-10 0 09-22-2011 10:31 PM
my first rc-car build - f350 on scx10 izeman Axial SCX-10 22 01-06-2010 04:46 AM
F350 scx10 tr? ttown180 Axial SCX-10 13 10-30-2009 10:47 PM
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 01:49 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2022, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com