06-20-2012, 04:44 PM | #1 |
Moderator Rule Breaker Join Date: Feb 2004 Location: Austin, Tx
Posts: 5,970
| eric113's Mog Current Setup Front Axle Hot racing spool 3racing portal Traxxas bearings Traxxas stub shafts Gunnar custom pins Custom steering links Axial Cvd's Dynamite servo horn Axial clockable C's Axial HD 36/13 gears Rear Axle Hot racing spool 3racing lock out 3racing portal Traxxas bearings Traxxas stub shafts Gunnar custom pins Axial HD gears Axial 4 link mount Axial stock inner shafts Wheels & Tires Rc4wd 1.9 Hummer wheels Golden Horizon Hummer wheels Proline 1.9 XL swampers Crawler Innovations duce wild single stage foams Proline 1.9 swampers Crawler Innovation's lil deuce foams RC4wd MTZ's Crawler Innovations duce wild single stage foams Full wrap weights front 4oz weight rear wheels Transmission Axial slipper Axial motor plate 10 tooth 32 pitch Robson Racing pinion 60 tooth 32 pitch duratrax Spur Gear Driveshafts Gmade Hardened Universal shafts Gunnar Custom Pins Suspension Traxxas Steel links Traxxas rod ends Axial icon scx10 shocks 60w oil Chassis and Body Axial Scx10 chassis Hand Bro's Scx10 Cms kit RJ2 tube work Tamiya 406 unimog cab Proline interior RC Screwz stainless steel screws Power and Control Mamba Max Pro Waterproofed Castle Creations bec waterproofed set 7.4.v Holmes Hobbies steering servo Hoblmes Hobbies brushless 13.5t motor Futaba 4PK Futaba R604FS RX towerpro MG945 winch servo Heyok HV winch controller 1300mah 30c 4s G-force value hobby lipos Last edited by eric113; 03-29-2015 at 10:01 PM. |
Sponsored Links | |
06-20-2012, 04:53 PM | #2 |
Moderator Rule Breaker Join Date: Feb 2004 Location: Austin, Tx
Posts: 5,970
| Re: eric113's Mog
I always wanted Mog and worked out deal with member on here. Originally owned and built by Constantmotion constantmotion's SCX-10 Unimog For now I threw on the pitbulls. This how it currently sitting. I wanted to go thur it and see what upgrades it had and what upgrades is needed. I'm anal about cleaness of my rigs, this one is no different. Last edited by eric113; 07-13-2012 at 07:41 PM. |
06-20-2012, 04:56 PM | #3 |
I wanna be Dave Join Date: Dec 2005 Location: Happiness is a warm AK.
Posts: 12,563
| Re: eric113's Mog
Sweet! |
06-20-2012, 04:56 PM | #4 |
Im Brandon Join Date: Feb 2005 Location: Colfax, CA
Posts: 8,156
| Re: eric113's Mog
Yes! Can never get enough of the Unimog builds |
06-20-2012, 05:42 PM | #5 |
MODERATOR™ Join Date: Jul 2004 Location: Ohio
Posts: 18,928
| Re: eric113's Mog |
06-20-2012, 05:47 PM | #6 |
RCC Addict Join Date: Oct 2007 Location: Kennewick, Washington
Posts: 1,382
| Re: eric113's Mog
That is a well built MOG. Can't wait to see what you do and add to it. Portals ??
|
06-20-2012, 05:54 PM | #7 |
I wanna be Dave Join Date: Mar 2007 Location: roland,ar
Posts: 5,981
| Re: eric113's Mog
good you stripped it down... it was due for some tlc and new paint.. glad to see it went to good hands! that thing climbs like a mountain goat.. it always surprised everyone at how stable it was.. |
06-20-2012, 05:59 PM | #8 | |
Moderator Rule Breaker Join Date: Feb 2004 Location: Austin, Tx
Posts: 5,970
| Re: eric113's Mog Thought you might like this. I plan on changing the Taco into Mog. So I have 2 Mogs. Any tricks to keep stock scx shocks from leaking ? Quote:
Thanks Dave. I would love to do portals on here, but makes it wide enough that would rework the tube work. I think 3racing stop making portals, I can't find them anywhere, unless I went with the Integy portals | |
06-20-2012, 06:03 PM | #9 | |
Moderator Rule Breaker Join Date: Feb 2004 Location: Austin, Tx
Posts: 5,970
| Re: eric113's Mog Quote:
I was just happy I finally pried this out your hands. The little bit I did drive it, I could tell it going to be awesome driving rig! Last edited by eric113; 06-20-2012 at 06:10 PM. | |
06-20-2012, 06:04 PM | #10 |
I wanna be Dave Join Date: Feb 2011 Location: Atlanta, GA
Posts: 2,650
| Re: eric113's Mog
Looking forward to the refresh!
|
06-20-2012, 06:09 PM | #11 |
SORRCA Committee Member Join Date: Dec 2008 Location: Parkston, SD
Posts: 4,523
| Re: eric113's Mog
Awesome E! Only Mog I ever built, so far, glad it's in good hands!
|
06-20-2012, 06:25 PM | #12 | |
Im Brandon Join Date: Feb 2005 Location: Colfax, CA
Posts: 8,156
| Re: eric113's Mog Quote:
Yup, don't run any shock oil in them... JK. Try some green slime on the O-Rings. Make sure they aren't torn or ripped. Add some bump stops to the shock shafts, over compressing them (too much oil) will cause it to blow past the rings occasionally. I run them with slightly less oil than the "normal" and a small bump stop. | |
06-20-2012, 07:37 PM | #13 | |
Moderator Rule Breaker Join Date: Feb 2004 Location: Austin, Tx
Posts: 5,970
| Re: eric113's Mog Thanks Brit. Thanks Shon, I guess you only done this time or two. Quote:
| |
06-20-2012, 07:42 PM | #14 |
Moderator Rule Breaker Join Date: Feb 2004 Location: Austin, Tx
Posts: 5,970
| Re: eric113's Mog
Progress for tonight. Got the rear axle cleaned up and shocks rebuilt, bolted back in. Yesterday I clean frame, trans, frame plastic's |
06-20-2012, 07:51 PM | #15 |
I wanna be Dave Join Date: Sep 2005 Location: Houston, TX
Posts: 16,952
| Re: eric113's Mog
Are we going to see that infamous diff shave on this rig?
|
06-20-2012, 07:54 PM | #16 |
Moderator Rule Breaker Join Date: Feb 2004 Location: Austin, Tx
Posts: 5,970
| Re: eric113's Mog |
06-20-2012, 08:04 PM | #17 |
I wanna be Dave Join Date: Sep 2005 Location: Houston, TX
Posts: 16,952
| Re: eric113's Mog
Aww....... |
06-24-2012, 07:29 PM | #18 |
I'm HUGE in Japan! Join Date: Dec 2011 Location: Clearwater - home of the endless summer
Posts: 365
| Re: eric113's Mog
LOVE this MOG!
|
06-24-2012, 07:32 PM | #19 |
I wanna be Dave Join Date: Dec 2005 Location: Happiness is a warm AK.
Posts: 12,563
| Re: eric113's Mog
And then...
|
06-24-2012, 08:16 PM | #20 |
Rock Stacker Join Date: Jun 2010 Location: Atlanta
Posts: 94
| Re: eric113's Mog
Looking good bro!! |
eric113's Mog - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
eric113's TTC FJ | eric113 | 2.2 Scale Rigs | 171 | 09-22-2012 06:44 PM |
eric113's Wroncho | eric113 | Axial SCX-10 | 13 | 06-23-2012 12:28 AM |
eric113's FJ tuber | eric113 | Axial SCX-10 | 14 | 02-15-2011 10:52 PM |
eric113's Xr10 | eric113 | Axial XR10 | 43 | 10-21-2010 07:38 AM |
eric113's Honcho | eric113 | Axial SCX-10 | 44 | 05-06-2010 09:36 PM |
Thread Tools | |
Display Modes | |
| |