**chicostaxxs007's Muddin Clod** 5 Attachment(s) Well I had this for quite some time now and finally got to it.....sorry for the very long delay! Started with an very well done Clod Crew cab, SCX10 chassis, RC4WD DC 2.2 wheels with narrowed Mashers and some RC4WD shocks. Also adding a full compliment of my stainless links, four link truss, custom shock hoops and custom bumpers front and rear. Utilized a stock Axial four link up front so that the servo could stay on the axle and I will be making custom mounts for the dual shock set up as well."thumbsup" Wheelbase stretched out with new links and frame stretched in the rear. Attachment 205434 Attachment 205435 Attachment 205436 Attachment 205437 Attachment 205438 |
Very cool! Subbed! |
Re: **chicostaxxs007's Muddin Clod** Looking very awesome! Almost long enough to keep one end out of the mud pit at all times :P |
Re: **chicostaxxs007's Muddin Clod** yes sirr!! shon links look perfect and the mashers where just for mock up but they dont look to bad:twisted: |
Re: **chicostaxxs007's Muddin Clod** Quote:
Quote:
Quote:
|
Re: **chicostaxxs007's Muddin Clod** Quote:
|
Re: **chicostaxxs007's Muddin Clod** shon what drive shafts should i get that will fit? rc4wd |
Re: **chicostaxxs007's Muddin Clod** "thumbsup"its gonna look killer when shocks and interior are in:twisted: |
Re: **chicostaxxs007's Muddin Clod** Quote:
Quote:
|
Re: **chicostaxxs007's Muddin Clod** Thats bad ass right there, will be watching. |
Re: **chicostaxxs007's Muddin Clod** yeah, that's pretty much awesome "thumbsup" |
Re: **chicostaxxs007's Muddin Clod** any updates? |
Re: **chicostaxxs007's Muddin Clod** Soon as I get some pics."thumbsup" Also, for the rear drive shaft the length is 155mm from trans to axle."thumbsup" Are you sure you don't want to trade?:ror::mrgreen: |
Re: **chicostaxxs007's Muddin Clod** im sure would like to get it dirty:mrgreen: has for the shaft will the punisher shaft for ax10 123mm-165mm from rc4wd be good? |
Re: **chicostaxxs007's Muddin Clod** where we at:flipoff: |
Re: **chicostaxxs007's Muddin Clod** 5 Attachment(s) Working to get it finished up this week.......finally! Got the front shock towers in, just need to make the lower mount for the second shock. Also hacked the hell out of a NB JK interior:twisted:! At first thought, I was like "this isn't going to fit" but after some Dremel work I got it roughed in. Should get it buttoned up tonight, just need to add a little styrene to the door panels and lower the dash a bit. Attachment 209654 Attachment 209655 Attachment 209656 Attachment 209657 Attachment 209658 |
Re: **chicostaxxs007's Muddin Clod** Quote:
|
Re: **chicostaxxs007's Muddin Clod** Hey, I built that body! I think... didn't I? :oops: It's nice to see it finally get built up. And done properly at that. |
Re: **chicostaxxs007's Muddin Clod** Quote:
Well, done at least anyway.:mrgreen: |
Re: **chicostaxxs007's Muddin Clod** how did you get the dual shocks setup? |
All times are GMT -6. The time now is 07:22 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com