Scx10 lower links
 

I AM NEW TO THE SCALE CRAWLERS AND HAVE AN SCX10 HONCHO.
IM LOOKING TO CHANGE THE LOWER LINK SYSTEM AND IM GETTING FRUSTRATED TRYING TO FIND THE CORRECT LINKS THAT WILL BOLT RIGHT UP TO A STALK HONCHO. ANY SUGGESTIONS? I HAVE FOUND THE LINK SET FROM AXIAL AND WOULD LIKE TO GO WITH THE GREEN ALLOY GEARBOX HOLDER AND LOWER LINK SET FROM INTEGY BUT I CANT SEEM TO FIND ANY SPECS ON THE LENGTH AND IM NOT SURE IF THEY WILL WORK WITH OUT FURTHER MODS. I DO EVENTUALLY PLAN ON A LIFT, SHOCKS, UPPER LINKS, AND NEW DIFFS BUT JUST WANT TO START WITH THESE LOWERSTowerHobbies.com | INTC23126GREEN C23126GREEN Integy Alloy Gearbox Holder Lower Link Green SCX10 (4) ANY INPUT/SUGGESTIONS WOULD BE AWESOME THANKS!

Re: Scx10 lower links
 

First: quit screaming (ALL CAPS). :roll:

Second: search. Obviously you searched some and found what you did. A good, even mediocre, search on this site would told you to stay way from Integy.

Since it is your first post, I'll throw you a bone. 8)

1. Go to axial racing's website. (No link given, type it for practice.)
2. Place your mouse's cursor over [PRODUCTS] at the top.
3. Select [option parts].
4. Click on the SCX-10 Trail Honcho photo.
5. Select [SUSPENSION/STEERING] from the "FILTER BY CATEGORY:" options on the right side of the page.
6. Click [Next] at the bottom right of the page.
7. You will see some springs, links, and shocks. Start reading.
8. Note the part numbers. Type part numbers in search engine and click the search icon for pricing and retailers.

This exercise will get you the proper lower links.

By the way, welcome to the site. Use the knowledge this site can offer. Have fun. "thumbsup"

The link kit instructions have all the lengths and part numbers in them.
You can find them on the Axial racing web site under Support > Instructions in the parts section.

Welcome to the forum. Posting gets easier after a few posts.

Re: Scx10 lower links
 

Haha sorry for the cpas lock i posted that from work. Thanks for the advice and going easy on me. :) the search tips are helpfull.

Re: Scx10 lower links
 

rear lower links on a honcho are 106mm.

Re: Scx10 lower links
 

I just did this:

AX30549



this kit has everything you need!

Re: Scx10 lower links
 

Or you can just make your own for only dollars. I will finish up my how to video tomorrow and post it.

Re: Scx10 lower links
 

Re: Scx10 lower links
 

X2, mine are still holding up great, pretty stout pieces.