Next build: Dingo to Honcho
 

http://www.themirrorpool.com/RC/1112_newBuild.jpg

Dingo kit, long wheelbase kit, Honcho body w/ cage, FXR w/35 turn pro, RC4WD front bumper, Dinky RC honcho bedsides, hand bros CMS, axial c-hubs/arms, over/under drive gears, axial beadlocks, specktrum RX, ACE servo w/ metal gears & good torque. Only think I haven't settled on yet is the tires, may just run the stock ones for a bit.

Re: Next build: Dingo to Honcho
 

Finished
http://farm9.staticflickr.com/8355/8...22391e17d5.jpg
rcStands3 by ethernectar, on Flickr

Small servo to trigger winch controller.
http://farm9.staticflickr.com/8077/8...4cb928a208.jpg
winchControllerServo by ethernectar, on Flickr

Styrene platform I made to mount the driver.
http://farm9.staticflickr.com/8373/8...4a971bf844.jpg
driverMount by ethernectar, on Flickr

Driver mounted.
http://farm9.staticflickr.com/8077/8...f68f96c840.jpg
driver by ethernectar, on Flickr

Scale goodies.
http://farm9.staticflickr.com/8082/8...1cdac64793.jpg
Gear by ethernectar, on Flickr