FATALLYILL: SCX10 Cherokee build

[FATALLYILL]

I have most of it stripped, still have to finish stripping with brake fluid to get all the rest and ill be ordering a new decal sheet from proline.

[FATALLYILL]

Well I pretty much lost interest in my rc for awhile. too much fun wheeling IRL lol. been spending alot of time working and working on my 1:1 XJ.

I resprayed my current XJ body just so I could enjoy playing with it again. I'm going to buy a new body to start fresh with next week.

ordered a few things today for the RC
1.55 rc4wd wagons
dingo front and rear bumpers (they were cheap and more scale then what im stuck with lol)
metal lower links
allen wrenches lol (i dont have any tiny ones for wrenching on the RC)

I trimmed the flares off and painted it to match my 1:1

[FATALLYILL]

got my 1.55 wagons, dingo bumpers and my metal axial lower links.
I got the front dingo bumper on and found out I don't have a rear bumper mount so I ordered a metal one.
I ordered a set of 1.55 mud slingers for my wagons yesterday.

[FATALLYILL]

how it looks atm. once my other parts come in she'll start looking more scale

painted my 1.55s black, waiting on tires to get here

[Kitty]

looking good,waiting for my cherokee body also.what lenght have the lower links

[FATALLYILL]

Originally Posted by Kitty

looking good,waiting for my cherokee body also.what lenght have the lower links

thanks, I'm going to buy a new body next week cause i used the wrong paint when i did this one

the lower links are by axial the tubes are 6x91mm

[Kitty]

thx for the quick answer,just put the same in mine,waiting for the body,and i was afraid that are gonna be to short.THX allot

[FATALLYILL]

Originally Posted by Kitty

thx for the quick answer,just put the same in mine,waiting for the body,and i was afraid that are gonna be to short.THX allot

no problem. my rig was a honcho and i put the shorter plastic links on back for my cherokee body and i noticed when i got my metal links that they are shorter in front too and it actually lines up the front axle with the body even better

[FATALLYILL]

got my 1.55s on with mud slingers and painted the stock centers red after trimming them to fit.

[ryaneddy16]

Love the look of the cherokee!!

[FATALLYILL]

thanks. I lowered the body and have my rear bumper on it now. it looks alot better

[FATALLYILL]

been doing alot more tinkering with my scx10 Cherokee. bought some new things and its coming along nicely.
axial beadlock wheels, aftermarket bead rings, junfac wheel spacers, poison spider rear bumper and a new cherokee body.
Just today I modified and swapped the honcho front bumper back on and relocated the 2 other lights behind the body to illuminate the headlights and also reamed out my new axial beadlock wheels to mount on my wheel spacers. its starting to look pretty beast

[TAT76]

Truck looks good but for me I liked 10 months ago with the mudslingers.. lol Good work

[FATALLYILL]

thanks. future plans were to buy pitbull rockbeasts for my new wheels, for now I removed the ripsaws front the stock wheels and am running those. the mud slingers were a bit too small, didnt fill up the wheel wells enough

[FATALLYILL]

Been doing things to my xj more and more. Next purchase will be a new esc and another motor

[Spidernad]

That driver looks familiar.

[FATALLYILL]

Thanks

[FATALLYILL]

[Hammer!]

beast cherokee!

[FATALLYILL]

Lol thanks I'm pretty happy with where it's going. I was just staring at it a couple times admiring the scale ness lol. Thankfully got my savox 1230 servo today too