Go Back   RCCrawler Forums > Scale Rigs Brand Specific Tech > Axial Brand Scale Rock Crawlers > Axial SCX-10
Loading

Notices

Thread: 4 Link Front

Reply
 
LinkBack Thread Tools Display Modes
Old 12-05-2012, 08:09 PM   #1
Quarry Creeper
 
Join Date: Jun 2012
Location: Earth mostly
Posts: 478
Default 4 Link Front

Since I put the Tekin motor and 2.2s my front link keeps popping out under stress or sometimes wheel hop. I know there's a million threads on this but some guys say its possible with the stock plate and location and others say you have to move it. My question is leaving the servo in the stock location can you fit the 4 Link truss under it and mount the links ? I found a couple pics of guys who had done it but it looks like it binds. I can make my own bent links if need be. The pic here looks like its all stock parts but the links look like they rub. I have the truss but if it doesn't work I want to have the stuff ordered for the next time I am home to fix it.

If you have done it with the servo in the stock location can you post some pics at rest and at full flex please.
xCoolHandLukex is offline   Reply With Quote
Sponsored Links
Old 12-05-2012, 08:12 PM   #2
Quarry Creeper
 
Join Date: Jun 2012
Location: Earth mostly
Posts: 478
Default Re: 4 Link Front

Pic
Attached Images
 
xCoolHandLukex is offline   Reply With Quote
Old 12-05-2012, 08:29 PM   #3
Quarry Creeper
 
Join Date: Sep 2012
Location: Baltimore
Posts: 206
Default Re: 4 Link Front

flip the links skinny end toward the axle. then put one of the more thin (maybe 2-3mm thick) shock/whatever spacers that should be on one of the parts trees that came with the truck between the axle and the servo plate to shim it up just a hair. that should eliminate any chance of contact.

when i put the four link stuff on the front it looked awful close.. so i just did what i described here and i haven't had anything pop off anywhere and i know a couple of my plastic ends are pretty assed out.

Last edited by monkeymagic9; 12-05-2012 at 08:31 PM.
monkeymagic9 is offline   Reply With Quote
Old 12-06-2012, 09:54 AM   #4
Quarry Creeper
 
Join Date: Jun 2012
Location: Earth mostly
Posts: 478
Default Re: 4 Link Front

Axial Racing - Converting Your SCX10 TR to Aluminum

I found this on the axial site.
xCoolHandLukex is offline   Reply With Quote
Reply



4 Link Front - Similar Threads
Thread Thread Starter Forum Replies Last Post
4 link front boosterror Axial SCX-10 11 05-05-2011 09:51 AM
Front 4 link Ant Chaser Newbie General 1 03-29-2011 01:50 PM
4- Link front... Pappy Axial SCX-10 11 08-01-2010 01:09 PM
3 link front 4 link rear? MaxxMc Losi Mini-Rock Crawler 7 04-03-2009 09:31 AM
IFS w/ 4 link front and 3 or 4 link rear. T-Man Traxxas Crawlers 6 10-26-2004 07:28 AM
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 08:22 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com