Go Back   RCCrawler Forums > Scale Rigs Brand Specific Tech > Axial SCX-10
Loading

Notices


Like Tree8Likes

Thread: Southern SXC10 Build

Reply
 
LinkBack Thread Tools Display Modes
Old 12-29-2012, 07:14 PM   #1
Pebble Pounder
 
Join Date: May 2012
Location: Houston
Posts: 189
Default Southern SXC10 Build *Update*

Parts List

Electronics:
Holmes Hobbies BR-XL
Holmes Hobbies 540 Trail Master Pro
Ace CS170 Ultra Torque Ti Gear Servo
Stock Receiver
Stock Radio

Chassis and Suspension:
Vanquish Products Front Shock Hoops
Vanquish Products Rear Shock Hoops
RC4WD King 110mm Shocks
RC4WD Bulldog Winch
R2J Stainless Steel Links with Traxxas Rod Ends
RC4WD Mojave Body

Font Axle:
Vanquish Products Currie Rockjock Housing
Vanquish Products Truss/Upper Link Mount
Vanquish Products Lower Link Mounts
Vanquish Products Servo Mount
Vanquish Products 0 Degree High Steer Knuckles
Vanquish Products C-Hubs
Vanquish Products Titanium Tie Rod/Drag Link
Vanquish Products Bearing Mounts
Stock Universals
Stock Locker
Stock Gearing

Rear Axle:
Vanquish Products Currie Rockjock Housing
Vanquish Products Truss/Upper Link Mount
Vanquish Products Lower Link Mounts
Vanquish Products Bearing Mounts
Stock Axle Shafts
Stock Locker
Stock Gearing

Drivetrain:
Stock Transmission Housing
Stock Transmission Gearing
Stock Spur
Robinson Racing 15 Tooth Pinion
RC4WD 130-150mm Punisher Shaft II

Wheel and Tires:
Vanquish Products OMF 2.2 Scale Rockcrawler Buggy Beadlock Wheels x4
Vanquish Products SLW Hubs .850 x4
LockedUp RC Inspired 2.2 Rings x4
Proline 2.2 TSL Swampers X4
Attached Images
        

Last edited by GravelDuster; 01-30-2013 at 08:40 PM.
GravelDuster is offline   Reply With Quote
Sponsored Links
Old 12-29-2012, 07:49 PM   #2
Pebble Pounder
 
Join Date: May 2012
Location: Houston
Posts: 189
Default Re: New SCX10 with Currie Axles

Here is a few at full flex, not to shabby.
Attached Images
  
Guam_RC and The DC like this.
GravelDuster is offline   Reply With Quote
Old 12-29-2012, 07:52 PM   #3
Gold Star Baby!
 
Maddog Madigan's Avatar
 
Join Date: Nov 2011
Location: cold state
Posts: 1,149
Default

Looks good, great articulation!
Maddog Madigan is online now   Reply With Quote
Old 12-29-2012, 08:45 PM   #4
RCC Addict
 
Join Date: Sep 2007
Location: Western ND, Bakken central
Posts: 1,631
Default Re: New SCX10 with Currie Axles

Holy applesauce those axles sexy
701 Technique is offline   Reply With Quote
Old 12-30-2012, 09:51 AM   #5
Pebble Pounder
 
Join Date: May 2012
Location: Houston
Posts: 189
Default Re: New SCX10 with Currie Axles

They are VP is amazing. Going to pick up some solid brass tubing and start work on the truggy portion. Going to use a buddies Mojave cab for the mock up. I have never done any tube work before, any tips?
GravelDuster is offline   Reply With Quote
Old 12-30-2012, 09:59 AM   #6
Rock Crawler
 
Join Date: Sep 2011
Location: truckee
Posts: 635
Default Re: New SCX10 with Currie Axles

looks awesome man. have you thought about doing the xr mod to make it wider instead of the wheel widener? i think that may be the route i go.
ninja turtle is offline   Reply With Quote
Old 12-30-2012, 10:10 AM   #7
Pebble Pounder
 
Join Date: May 2012
Location: Houston
Posts: 189
Default Re: New SCX10 with Currie Axles

You know I just saw that after I bought everything lol. It was also running Wratih c-hubs and knuckles, it looked sweet. It seems pretty sturdy so far, I took it out this morning and put a pack through it. Everything is still tight and holding strong. I have a Novak 13.5 brushless I may drop in it today. Lots of mixed reviews about it, but Ive never had an issue with mine. And its just laying there with no home.
GravelDuster is offline   Reply With Quote
Old 12-30-2012, 10:13 AM   #8
Rock Crawler
 
Join Date: Sep 2011
Location: truckee
Posts: 635
Default Re: New SCX10 with Currie Axles

Quote:
Originally Posted by GravelDuster View Post
You know I just saw that after I bought everything lol. It was also running Wratih c-hubs and knuckles, it looked sweet. It seems pretty sturdy so far, I took it out this morning and put a pack through it. Everything is still tight and holding strong. I have a Novak 13.5 brushless I may drop in it today. Lots of mixed reviews about it, but Ive never had an issue with mine. And its just laying there with no home.
haha tell me about it, thats the name of this game.

looks sick either way.
ninja turtle is offline   Reply With Quote
Old 12-30-2012, 03:06 PM   #9
Pebble Pounder
 
Join Date: May 2012
Location: Houston
Posts: 189
Default Re: New SCX10 with Currie Axles

REALLY?!?! F*CK YOU NOVAK!!! I just got done saying never had an issue with the spare 13.5 system I had laying around. Got it installed ran it around the house for a sec, all seemed well. Took it outside for 5 minutes, ESC fried.........Just ordered a HH Trailmaster combo.
GravelDuster is offline   Reply With Quote
Old 12-30-2012, 05:33 PM   #10
Pebble Pounder
 
Join Date: May 2012
Location: Houston
Posts: 189
Default Re: New SCX10 with Currie Axles

Since I had to tear out all the electronics again I decided to clean up the wiring a bit, I am a freak when it come to wires. I got a few extra holes cut in the receive box, shortened all of the leads, re soldered everything. Got all of the wiring inside the receiver box, looks nice and clean. Now I have a wiring plan when my BRXL combo get here.
Attached Images
 
hoyt likes this.
GravelDuster is offline   Reply With Quote
Old 12-30-2012, 09:56 PM   #11
Rock Stacker
 
Join Date: Oct 2005
Location: Sadieville
Posts: 74
Default Re: Southern SXC10 Build

Sorry but badass is about the only thing that comes to mind ... Cool build!!
4starCstms is offline   Reply With Quote
Old 01-05-2013, 09:01 PM   #12
Pebble Pounder
 
Join Date: May 2012
Location: Houston
Posts: 189
Default Re: Southern SXC10 Build

Got my Holmes Hobbies TorqueMaster ESC/Motor today after my Novak burned. Ripped everything out....again. Cut down and soldered all of the leads and managed to get all of the wiring inside the stock box. It has been raining all day here so I didn't get to take it outside so I had to settle for the living room. This thing is smoooooth. I am running it with a 3S 5000mah Lipo. This is my first HH setup, now I see how awesome they are.
Attached Images
  
GravelDuster is offline   Reply With Quote
Old 01-05-2013, 09:26 PM   #13
Pebble Pounder
 
Join Date: Dec 2012
Location: NE Tennessee (Bristol,Baby!!!)
Posts: 190
Default Re: Southern SXC10 Build

Quote:
Originally Posted by 4starCstms View Post
Sorry but badass is about the only thing that comes to mind ... Cool build!!
A HUGE +2 to that!
The DC is offline   Reply With Quote
Old 01-05-2013, 09:51 PM   #14
Newbie
 
Join Date: Apr 2012
Location: Alma,mi
Posts: 36
Default Re: Southern SXC10 Build

awesome job on the clean wiring.
19_mustang_96 is offline   Reply With Quote
Old 01-07-2013, 12:58 PM   #15
Pebble Pounder
 
Join Date: May 2012
Location: Houston
Posts: 189
Default Re: Southern SXC10 Build

Thanks man, I am a total weirdo when it come to wiring, I get very OCD.
Just ordered the meat and potatoes for my build, this will be my first hard body, and suggestions for painting?
Attached Images
 
4starCstms likes this.
GravelDuster is offline   Reply With Quote
Old 01-07-2013, 08:56 PM   #16
Quarry Creeper
 
Join Date: Feb 2011
Location: s. terra firma
Posts: 394
Default Re: Southern SXC10 Build

How are you going to mount it . Please show pictures. Thanks
im gunna crawl is offline   Reply With Quote
Old 01-08-2013, 10:06 AM   #17
Pebble Pounder
 
Join Date: May 2012
Location: Houston
Posts: 189
Default Re: Southern SXC10 Build

I dont know yet, I'm going to have to see how everything lines up. But i will snap some pics of how I mount it.
GravelDuster is offline   Reply With Quote
Old 01-08-2013, 04:21 PM   #18
Rock Crawler
 
Join Date: Jun 2010
Location: UTAH COUNTY
Posts: 690
Default Re: Southern SXC10 Build

Quote:
Originally Posted by GravelDuster View Post
Thanks man, I am a total weirdo when it come to wiring, I get very OCD.
Just ordered the meat and potatoes for my build, this will be my first hard body, and suggestions for painting?
Pearl white? I think that would look awesome!
jthellfire911 is offline   Reply With Quote
Old 01-09-2013, 06:24 AM   #19
Pebble Pounder
 
Join Date: Mar 2009
Location: Independence,KY
Posts: 141
Default Re: Southern SXC10 Build

Looks awesome so far
XJrob is offline   Reply With Quote
Old 01-09-2013, 06:33 AM   #20
Pebble Pounder
 
Join Date: Aug 2012
Location: Finland
Posts: 116
Default Re: Southern SXC10 Build

Quote:
Originally Posted by GravelDuster View Post
Thanks man, I am a total weirdo when it come to wiring, I get very OCD.
Just ordered the meat and potatoes for my build, this will be my first hard body, and suggestions for painting?
Krylon Fusion paint.
TNT1 is offline   Reply With Quote
Reply


Southern SXC10 Build - Similar Threads
Thread Thread Starter Forum Replies Last Post
Licensed Currie Enterprises Rockjock Axles by Vanquish Products tom@vp Vanquish Products 750 Yesterday 08:47 AM
VP Currie Rear Axle Assembly PrjktRedRubi Axial SCX-10 7 12-27-2012 06:20 PM
Vanquish SCX10 Currie Axles IN Stock Rpp Hobby RPP Hobby 0 12-18-2012 01:52 PM
New Vaquish Axles - Thank you Currie bigstu General Scale Talk 60 12-11-2012 06:04 AM
crawlin with currie peyton. Axial AX-10 Scorpion 14 07-05-2009 11:31 AM
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 05:03 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com