RCCrawler Forums - Dingo VP links

RCCrawler Forums (http://www.rccrawler.com/forum/)

- Axial SCX-10 (http://www.rccrawler.com/forum/axial-scx-10/)

- - Dingo VP links (http://www.rccrawler.com/forum/axial-scx-10/420619-dingo-vp-links.html)

stpete40

01-02-2013 06:36 PM

Dingo VP links

Anyone know offhand what length links off of the VP website fit the Dingo?

Sent from my DROID BIONIC using Tapatalk 2

DeweyCJ5

01-02-2013 07:28 PM

Re: Dingo VP links

The Traxxas Revo TRA 5318 are perfect for the wheel base , Pushrod length end-to-end: 4-1/16" (102mm)
Pushrod length between threads: 3-1/4" ( 81mm) Diameter of unthreaded section: 3/16" ( 5mm)

Natedog

01-02-2013 10:33 PM

Re: Dingo VP links

Quote:

Originally Posted by DeweyCJ5 (Post 4103570)

The Traxxas Revo TRA 5318 are perfect for the wheel base , Pushrod length end-to-end: 4-1/16" (102mm)
Pushrod length between threads: 3-1/4" ( 81mm) Diameter of unthreaded section: 3/16" ( 5mm)

End to end or eye to eye? Eye to eye is what really matters.

Natedog

01-02-2013 11:16 PM

Re: Dingo VP links

Quote:

Originally Posted by stpete40 (Post 4103463)

Anyone know offhand what length links off of the VP website fit the Dingo?

Sent from my DROID BIONIC using Tapatalk 2

measure your current eye to eye links, goto VP's site add 15mm to the stated length of the VP links and that is the eye to eye of the assembled VP link as per there site.

Natedog

01-03-2013 01:01 PM

Re: Dingo VP links

Update, I found that when the Revo ends are really tightened down on the VP links that they are about 1mm shorter than VP says. This is not much but it can allow a little more tuning, I like my rod ends fully bottomed on the threads for max strength.

All times are GMT -6. The time now is 12:25 PM.