02-03-2013, 11:25 PM | #1 |
Rock Stacker Join Date: Jan 2006 Location: Whatcom county
Posts: 82
| Vp wraith links
Dont know if anyone has tried this, but vp wraith links work on the new jk axial. Just put mine on tonite. Had them sitting next to my jk and wondered if they would work and sure enough they did.
|
Sponsored Links | |
02-04-2013, 12:31 AM | #2 |
Pebble Pounder Join Date: Jan 2013 Location: Zürich
Posts: 179
|
Hi, Thanks for the info!i put up my wraith kit links on my scx10. Just had to shorten the front ones a bit by putting shorter rod ends to it. |
02-04-2013, 06:24 AM | #3 |
Quarry Creeper Join Date: Dec 2010 Location: Alberta
Posts: 282
| Re: Vp wraith links Pics! What did the wheel base end up at with the VP link and revo rod ends?
|
02-04-2013, 07:09 AM | #4 |
Rock Stacker Join Date: Jan 2006 Location: Whatcom county
Posts: 82
| Re: Vp wraith links
Forgot to measure. Will post pics and info after work. |
02-04-2013, 08:37 AM | #5 |
Pebble Pounder Join Date: Aug 2007 Location: Switzerland
Posts: 109
| Re: Vp wraith links
I did an aluminum link upgrade using all Axial parts from Wraith, XR10 and SCX10 for the links and rod ends Rubi_con_Arni - Axial Jeep Wrangler Unlimited Rubicon see post #33 Wheelbase stays stock with that. Would be also interessted what the wheelbase would be with the VP Wrait links. Would guess that it is more. |
02-04-2013, 09:21 AM | #6 |
Quarry Creeper Join Date: Dec 2010 Location: Alberta
Posts: 282
| Re: Vp wraith links
If the wraith VP links make the wheel base longer then the stock 313mm I'll get a set. I keep bending the crap out of the stock axial aluminum links.
|
02-04-2013, 12:34 PM | #7 |
Pebble Pounder Join Date: Jan 2013 Location: Zürich
Posts: 179
|
You guys might wanna check the chaotic crawlers high clearance links for the wraith.
|
02-05-2013, 07:00 AM | #8 |
Pebble Pounder Join Date: Aug 2007 Location: Switzerland
Posts: 109
| Re: Vp wraith links To use on a SCX10? I did a test mount some months ago and did not like them on the SCX10 chassis. The lower bent links are close to interfere with the with the drive shaft or so. The normal version will do the better job in my opinion.
|
02-06-2013, 09:28 AM | #9 |
Pebble Pounder Join Date: Jan 2013 Location: Zürich
Posts: 179
|
I havent tested it out yet since i gotta them off my wraith first. When i get the time i ll post some picture. You re probably right bout the standard links having a better fit
|
Thread Tools | |
Display Modes | |
| |