Pic Request:Traxxas Big Bore's On Scx10

[BodiBuilt]

I've found a couple photo's here and there after hour's of thread browsing... but I would love to see a few more photo's of Scx10 rig's running Traxxas Big Bore shock's - post 'em if you got 'em!

Also, please share your rig weight along with your prefered shock spring and oil weight combination if you don't mind

Thanks in advance!

[DemonDancer]

here ya go.

[Zeus.:God]

What shocks, rear 2wd's? Might be a solid upgrade for me.

[mitchr97]

cool

[Postclanker]

ok...I'll play

Big Bore shocks...Losi Mini springs, 32wt oil all around...truck weight 6.5 lbs

[DemonDancer]

taxxas big bore with losi white springs. truck weighs 6lb 4oz

[nuckle]

Originally Posted by Postclanker

ok...I'll play

Big Bore shocks...Losi Mini springs, 32wt oil all around...truck weight 6.5 lbs

What shock mounts are those in front? I like the body mounts.

[Postclanker]

They are a top cad part

Find them here

Axial SCX10 Aluminum Front Shock Mount For Honcho & Dingo Silver TopCad 22408

[tmaxxdout]

I love the traxxas big bores here's my scx Chevy 4" big bores three hole piston 30wt oil Losi gold 2.75" springs right around 7.5lbs rtr



And heres el chupacabra now a Wroncho setup the same as above but with 20wt oil rtr weight is 7.5lbs

[Zeus.:God]

Originally Posted by tmaxxdout

I love the traxxas big bores here's my scx Chevy 4" big bores three hole piston 30wt oil Losi gold 2.75" springs right around 7.5lbs rtr



And heres el chupacabra now a Wroncho setup the same as above but with 20wt oil rtr weight is 7.5lbs

Are those 1.9's or 2.2's in the first picture?

[winnerone23]

4" big bores, 7lbs 6.9oz, 25Wt oil an losi white springs.. have been amazing performers!

[BodiBuilt]

I finally picked up a set of Traxxas "big bore's" for myself along with an assortment of Losi MRC springs and a set of spring cup adaptors from Crawler Innovations



Still putting more thought into the best way to maintain close to stock ride height using these longer shocks... I may need to locate some "adjustable" upper shock mounts to raise the top mount position, or possibly consider limiting the down travel of the new shocks internally... Hmmm...

Open for additional input

[tmaxxdout]

Originally Posted by Zeus.:God

Are those 1.9's or 2.2's in the first picture?

They are 2.2 mayhem 7s with tsl swampers don't have them anymore with the losi gold springs and 20 weight oil I kinda of have a droop setup which works good for me to keep it sitting nice and low. Sitting at ride height I'm about 2 3/4" from the ground to the skid but with the shocks fully extended I have about 3 1/2" at the skid running 2.2 ripsaws

[tmaxxdout]

Originally Posted by Zeus.:God

Are those 1.9's or 2.2's in the first picture?

They are 2.2 mayhem 7s with tsl swampers don't have them anymore... But with the losi gold springs and 20 weight oil I kinda of have a droop setup which works good for me to keep it sitting nice and low. Sitting at ride height I'm about 2 3/4" from the ground to the skid but with the shocks fully extended I have about 3 1/2" at the skid running 2.2 ripsaws

[wraithfreak]

I ended up going with the regular springs as the losi mini springs didn't perform as well as the longer springs in my opinion.

[2006Shelby]

These are 3.5 with cap mod making them 4in ete and there on my 2,2 scx10.





These are 4in eye no cap mod on my 1.9 roller im building