02-27-2013, 01:31 PM | #1 |
Pebble Pounder Join Date: Jun 2012 Location: las cruces
Posts: 193
| you brushless guys
ok so i got a mmp and im going to get a pro4 3300kv i dont know what gearing im going to use but what do you think too much for a scx and as of now i got a brxl and a 35t in it to compare to
|
Sponsored Links | |
02-27-2013, 01:42 PM | #2 |
Quarry Creeper Join Date: Dec 2010 Location: Alberta
Posts: 282
| Re: you brushless guys
Read the Wraith motor and gearing sticky at the top of the page in the wraith sections. Tons of gearing suggestions and what everyone runs with what motor.
|
02-27-2013, 01:46 PM | #3 |
Newbie Join Date: Nov 2012 Location: Sarnia
Posts: 32
| Re: you brushless guys
If you are running a 2s lipo then it will be faster then a 35t on stock gearing. it would run closer to the 27t stock motor or faster. i have ran a 3300kv in scx10 with a 3s lipo. changed the pinion to a 14t. good speed and torque. if staying with a 2s lipo then i would run stock pinion or pick up a couple smaller and test them out. |
02-27-2013, 01:48 PM | #4 |
Rock Crawler Join Date: Feb 2012 Location: Michigan
Posts: 617
| Re: you brushless guys
Are you going with 32 or 48 pitch gears? 2s or 3s? On 3s with 32p, I would start with a 60t spur with a 12 or 13t pinion. Keep an eye on motor temps and adjust accordingly.
|
02-27-2013, 01:53 PM | #5 |
Pebble Pounder Join Date: Jun 2012 Location: las cruces
Posts: 193
| Re: you brushless guys
i did look at the wraith thread but im running 1.9 their all 2.2 my roomate has a wraith and its not even close on how they drive thats why i posted here cuz gearing that works on a 2.2 wraith isnt always gona work on a 1.9 scx DGUY thanks man im prob gona stay 2s i have a 6k mah 2s and dont wana drop the money on a 3s |
02-27-2013, 01:59 PM | #6 |
Pebble Pounder Join Date: Jun 2012 Location: las cruces
Posts: 193
| Re: you brushless guys
DRTMI im going to use 48 unless their is a reason why
|
02-27-2013, 06:59 PM | #7 |
Quarry Creeper Join Date: Feb 2011 Location: The underground
Posts: 394
| Re: you brushless guys
That pro4 will strip the teeth right off the 48p gears. Usually when you go to brushless, 32p is next on the list because shortly after you need new gears anyway.
|
02-27-2013, 09:38 PM | #8 |
Newbie Join Date: Jan 2013 Location: The Desert
Posts: 28
| Re: you brushless guys
Another thing to note: If the esc you are going to use isn't crawler specific you may not have acess to instant reverse. Depending on the type of driving you are planning to do that will range from being a non-issue to totaly craptastic, the more climbing you are going to do the more it will suck if you can't blip reverse when you start to tip backwards. On the up side you should never have a problem winning any impromptu drag races with that motor!
|
you brushless guys - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Brushless Guys (: | Syd | Chit Chat | 12 | 03-10-2009 12:37 PM |
any computer guys? how bout bronco guys? | Bronco Fetish | Chit Chat | 10 | 09-11-2006 05:48 PM |
Thread Tools | |
Display Modes | |
| |