Go Back   RCCrawler Forums > Scale Rigs Brand Specific Tech > Axial Brand Scale Rock Crawlers > Axial SCX-10
Loading

Notices

Thread: Clod Buster body fitment

Reply
 
LinkBack Thread Tools Display Modes
Old 03-10-2013, 05:04 PM   #1
Newbie
 
Join Date: Apr 2010
Location: Hartland
Posts: 39
Default Clod Buster body fitment

I am wanting to get a body for my scx-10 honcho. MY question is how does the body fit the stock wheelbase, length and width wise?

TowerHobbies.com | AdvancedSearch Results

I like the look of this body alot but dont want the wheels sticking out, because the body is too narrow. Any help?
littlemel is offline   Reply With Quote
Sponsored Links
Old 03-10-2013, 05:16 PM   #2
Quarry Creeper
 
Join Date: Feb 2013
Location: SW Iowa
Posts: 227
Default Re: Clod Buster body fitment

The wheelbase on the clod is about 10 3/8 inches and is 7 1/8 wide at the middle of the fenders. Hope that's helps if you want more measurements let me know I have a clod body sitting here.
JBailey is offline   Reply With Quote
Old 03-10-2013, 05:23 PM   #3
Newbie
 
Join Date: Apr 2010
Location: Hartland
Posts: 39
Default Re: Clod Buster body fitment

Thank you, are you using it on a scx 10? What wheelbase are you using? Also what is the width of the front "fender"? outside to outside where a bumper wold go?

EDIT: I have been browsing around looking for info on these. also seems that 1.9 tires are too big for the fenders?

Last edited by littlemel; 03-10-2013 at 05:32 PM.
littlemel is offline   Reply With Quote
Old 03-10-2013, 06:34 PM   #4
Quarry Creeper
 
Join Date: Feb 2013
Location: SW Iowa
Posts: 227
Default Re: Clod Buster body fitment

Mine is on a homemade chassis and I set my wheelbase at 10 1/4. Where the bumper would go is 6 7/16 outside to outside of the front fenders. I took some pics on the frame I made for it and it has 1.9 flatirons and some on my Dingo with 1.55 rock stompers which are the same height.
full flex

image by ratrodfanbobcat, on Flickr

dingo chassis


image by ratrodfanbobcat, on Flickr


image by ratrodfanbobcat, on Flickr

Sorry my internet connection sucks so I had to take the pics with my phone and they're kinda dark and hard to see but hopefully they help.

Last edited by JBailey; 03-10-2013 at 06:38 PM.
JBailey is offline   Reply With Quote
Old 03-11-2013, 05:34 AM   #5
Newbie
 
Join Date: Apr 2010
Location: Hartland
Posts: 39
Default Re: Clod Buster body fitment

Cool, this helped me alot. Thank you for your help.
littlemel is offline   Reply With Quote
Old 11-13-2014, 04:14 PM   #6
Newbie
 
Join Date: Mar 2013
Location: Los Angeles
Posts: 3
Default Re: Clod Buster body fitment

What do I need to change on my scx10 so that my clod buster body fits the wheel base?
gilbert310 is offline   Reply With Quote
Old 11-13-2014, 07:29 PM   #7
Quarry Creeper
 
Join Date: Nov 2013
Location: Erie
Posts: 208
Default Re: Clod Buster body fitment

The length of the lower links changes your wheel base. You will also need to change the length of the upper links to keep the driveshaft angles in check...
Hirschowl is offline   Reply With Quote
Reply



Clod Buster body fitment - Similar Threads
Thread Thread Starter Forum Replies Last Post
clod buster body furiousgeorge Duratrax Cliff Climber 10 08-13-2009 06:17 PM
Clod buster body? trulyoffroad Axial AX-10 Scorpion 2 07-18-2009 11:33 PM
Clod buster body trulyoffroad Axial SCX-10 2 07-16-2009 08:57 PM
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 06:42 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com