Link Rod ends,any cross reference?
 

Im on the way to the hobby shop,Im going to make my own links today and got everything but some rod ends. The tutorial I seen said get some revo rod ends part #5347 but I know when I go up there they usually have everything but what I need! But I know some of the traxxas stuff is the same size,just wondering if anyone knows off hand if the revo/summit/slash etc will also work or anything else for that matter in case they dont have the revo's? Im using the 8/32 threaded rod. Thanks!

I believe the revo uses the same as the slash, slash 4x4, stampede, stampede 4x4, and monster jam trucks (witch is a 2wd stampede)

Sent from my GT-I9100 using Tapatalk 2

I have 2 stampede 2wd's and they don't use the same ends as the revo ends.. I just stocked up on all thread and 1/4" brake line for making links. I use revo ends, and the ends on my stampede's aren't the same..

-sent from my smarter than me phone

Re: Link Rod ends,any cross reference?
 

Thanks,They actually had the revo rod ends. I made them up and they came out Great! got 3 one foot sections of aluminum tube for $3.75, 3' of all thread for $3.25 and the rod ends that were the most expensive at $10.00. I got the back upper and lower done,and the front lower. I was wondering about the front upper links,right now its that Y wishbone looking thing? I seen in the spare parts they included the part for the rear that bolts on the axle to hold the upper links to the axle. Could I just remove the Y part and put that part that is for the rear up front to install 2 separate links instead of the Y link? Looks like it would go on and dont see issue why it wouldnt work,but just thought Id ask before I tear it down and try it,and benefit or issues from doing this?

Re: Link Rod ends,any cross reference?
 

It works great. DO IT! Just need a long screw to mount the links.