Go Back   RCCrawler Forums > Scale Rigs Brand Specific Tech > Axial Brand Scale Rock Crawlers > Axial SCX-10
STOCK specs for Axial RTR Honcho STOCK specs for Axial RTR Honcho
Home Register Forum Rules FAQ Calendar
Loading

Notices

Thread: STOCK specs for Axial RTR Honcho

Reply
 
LinkBack Thread Tools Display Modes
Old 04-22-2013, 04:31 PM   #1
Pebble Pounder
 
Join Date: Apr 2013
Location: Eastern Georgia, USA
Posts: 133
Default STOCK specs for Axial RTR Honcho
Hi all. I've started this thread to keep track of the stock specs of the Axial Honcho RTR. if you know any I don't already have, include them and I will continue to update this first post. Please correct me if anything is wrong of you have more accurate info!



Code:
Shocks:
  Over all length, 72mm END to END (NOT eye to eye)
  12.5mmx20mm  3.6 pounds/inch  "super soft" (red)
  12.5mmx40mm  4.08 lbs/in  "medium* (green)
  
Steering servo:
  132 inch ounce

Axle Bevel gears
  38/13

Transmission
  87/20 48p

Bearings
  5x11x4
  11x15x4
  

Motor
  27t
  RPMs?
  Torque?

ESC
  6c Nickle, 2s LiPo
  19t limit
  106amp peak
  BEC voltage/amp 5v/2a

Suspension Links
  Front
    Upper 112mm
    Lower 130mm
  Rear
    Upper 122mm
    Lower 130mm
Last edited by DieCastoms; 12-21-2013 at 06:53 PM. Reason: added bearings
DieCastoms is offline   Reply With Quote
Sponsored Links
Old 04-22-2013, 04:38 PM   #2
jpf
Quarry Creeper
 
Join Date: Feb 2012
Location: Norway
Posts: 255
Default
pinion is 20 tooth, lower links is 130mm long
jpf is offline   Reply With Quote
Old 04-22-2013, 04:39 PM   #3
Pebble Pounder
 
Join Date: Apr 2013
Location: Eastern Georgia, USA
Posts: 133
Default Re: STOCK specs for Axial RTR Honcho
Quote:
Originally Posted by jpf View Post
pinion is 20 tooth
Know the pitch?
DieCastoms is offline   Reply With Quote
Old 04-22-2013, 04:42 PM   #4
jpf
Quarry Creeper
 
Join Date: Feb 2012
Location: Norway
Posts: 255
Default
springs length:

jpf is offline   Reply With Quote
Old 04-22-2013, 04:43 PM   #5
jpf
Quarry Creeper
 
Join Date: Feb 2012
Location: Norway
Posts: 255
Default
Quote:
Originally Posted by DieCastoms View Post
Know the pitch?
yeah, 48 pitch
jpf is offline   Reply With Quote
Old 04-22-2013, 04:52 PM   #6
jpf
Quarry Creeper
 
Join Date: Feb 2012
Location: Norway
Posts: 255
Default
about the ESC:

jpf is offline   Reply With Quote
Old 04-22-2013, 04:57 PM   #7
Pebble Pounder
 
Join Date: Apr 2013
Location: Eastern Georgia, USA
Posts: 133
Default Re: STOCK specs for Axial RTR Honcho
pinion added, springs added, ESC added
DieCastoms is offline   Reply With Quote
Old 04-22-2013, 05:03 PM   #8
jpf
Quarry Creeper
 
Join Date: Feb 2012
Location: Norway
Posts: 255
Default
hope this was to some help
jpf is offline   Reply With Quote
Old 04-22-2013, 05:11 PM   #9
Pebble Pounder
 
Join Date: Apr 2013
Location: Eastern Georgia, USA
Posts: 133
Default Re: STOCK specs for Axial RTR Honcho
Absolutely! I didn't expect such a response to this thread, so quickly, to be honest!
DieCastoms is offline   Reply With Quote
Old 08-24-2013, 05:17 AM   #10
Newbie
 
Join Date: Jun 2013
Location: Hawaii
Posts: 8
Default Re: STOCK specs for Axial RTR Honcho
Sorry i know this is not relavent but If I wanted more torque out of the stock motor can I just lower my pinion? Great information BTW.
Agent 13 is offline   Reply With Quote
Old 08-24-2013, 07:59 AM   #11
RCC Addict
 
Join Date: Feb 2012
Location: Ca.
Posts: 1,580
Default Re: STOCK specs for Axial RTR Honcho
Quote:
Originally Posted by Agent 13 View Post
Sorry i know this is not relavent but If I wanted more torque out of the stock motor can I just lower my pinion? Great information BTW.
It won't actually change the rated torque of the motor but will give more low end pull. It will also slow the truck down. I've experimented with pinions on the stock motor using 16, 14, and 12 tooth pinions. I still wasn't happy. I ended up with a 35 turn motor and a 12 tooth pinion. More torque and a slower speed and it climbs well. It also lowered my motor and esc temps by a bunch.
raceeng18 is offline   Reply With Quote
Old 08-24-2013, 11:58 AM   #12
Newbie
 
Join Date: Jun 2013
Location: Hawaii
Posts: 8
Default Re: STOCK specs for Axial RTR Honcho
Quote:
Originally Posted by raceeng18 View Post
It won't actually change the rated torque of the motor but will give more low end pull. It will also slow the truck down. I've experimented with pinions on the stock motor using 16, 14, and 12 tooth pinions. I still wasn't happy. I ended up with a 35 turn motor and a 12 tooth pinion. More torque and a slower speed and it climbs well. It also lowered my motor and esc temps by a bunch.
I'll try the 12 t for now. You think 12t and 45t motor is a good combo?
Agent 13 is offline   Reply With Quote
Old 08-24-2013, 12:11 PM   #13
RCC Addict
 
Join Date: Feb 2012
Location: Ca.
Posts: 1,580
Default Re: STOCK specs for Axial RTR Honcho
Quote:
Originally Posted by Agent 13 View Post
I'll try the 12 t for now. You think 12t and 45t motor is a good combo?
Yes, that should give you a lot of torque and keep your operating temps in a good range. I'm going to try a 45 turn motor in a truck I'm building now and will stay with the 12 tooth pinion.
raceeng18 is offline   Reply With Quote
Old 08-25-2013, 01:10 AM   #14
Quarry Creeper
 
Join Date: Jan 2011
Location: vincennes 2 hours south of indianapolis
Posts: 398
Default Re: STOCK specs for Axial RTR Honcho
Upper links eye to eye are front 112 and rear 122
chattinfarms is offline   Reply With Quote
Old 08-25-2013, 01:19 AM   #15
Pebble Pounder
 
Join Date: Apr 2013
Location: Eastern Georgia, USA
Posts: 133
Default Re: STOCK specs for Axial RTR Honcho
Quote:
Originally Posted by chattinfarms View Post
Upper links eye to eye are front 112 and rear 122
Added! Thanks
DieCastoms is offline   Reply With Quote
Old 12-21-2013, 06:55 PM   #16
Pebble Pounder
 
Join Date: Apr 2013
Location: Eastern Georgia, USA
Posts: 133
Default Re: STOCK specs for Axial RTR Honcho
bearings sizes added
DieCastoms is offline   Reply With Quote
Old 12-22-2013, 10:56 AM   #17
Newbie
 
Join Date: Dec 2013
Location: CA
Posts: 3
Default Re: STOCK specs for Axial RTR Honcho
is this info not in the manual pdf?
hobie is offline   Reply With Quote
Old 12-22-2013, 12:09 PM   #18
Pebble Pounder
 
Join Date: Apr 2013
Location: Eastern Georgia, USA
Posts: 133
Default Re: STOCK specs for Axial RTR Honcho
Not all of it. Just been compiling stuff as I have to look things up, and as I hear things here and there. Figured it would be worthwhile to someone, somewhere, somehow, someday :P

DieCastoms (Michael)
DieCastoms is offline   Reply With Quote
Reply

Tags
honcho scx10 tr rtr axial, specs


« Previous Thread | Next Thread »

STOCK specs for Axial RTR Honcho - Similar Threads
Thread Thread Starter Forum Replies Last Post
Stock RTR Honcho cliff climbing Holdencars Scale Videos! 0 02-16-2013 02:38 AM
New RTR Honcho In Stock At RPP... For $355, LOL! NFA Fabrication Chit Chat 32 12-01-2011 12:31 PM
Stock RTR Honcho Performance*Questions. Bryan732 Axial SCX-10 7 07-04-2010 06:21 PM
SCX10 Honcho kit w/free winch & RTR In Stock RPP Hobby RPP Hobby 7 04-01-2010 11:45 PM
SCX10 Honcho RTR now in stock Cstzracing Vendors Market 0 03-31-2010 09:59 AM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On


All times are GMT -6. The time now is 01:13 PM.

Contact Us - RCCrawler.com - Top

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com