|
| LinkBack | Thread Tools | Display Modes |
02-19-2011, 12:33 PM | #1 |
Newbie Join Date: Feb 2011 Location: Prairiville
Posts: 27
| Scx 10 esc getting hott!!!
My scx 10 rtr esc is getting extreemly hott Truck is stock, im using 7 cell 8.4 volt 5000 Batts and after a few mins of running truck starts surging!!! Plz help not good with electric just getting out of nitros!! |
Sponsored Links | |
02-19-2011, 01:05 PM | #2 |
Newbie Join Date: Feb 2011 Location: Prairiville
Posts: 27
| Scx10 esc getting hott help!!!
My truck is completly stock and is 2 days old im using 8.4 volt 7 cell nimh 5000 mah batt aftr about 5 mins run time the truck starts surging and getting jumpy and my esc is sooo hot i can barely touch it! No gear binding ... Plz help
|
02-19-2011, 01:12 PM | #3 |
Scale Detail Engineering Join Date: Apr 2010 Location: Turtle Island
Posts: 5,573
|
I think it's rated up to 10 volts so your battery should be fine. I know this is silly but is your battery hooked up right, red to red and black to black? |
02-19-2011, 01:16 PM | #4 |
Newbie Join Date: Feb 2011 Location: Prairiville
Posts: 27
|
Yah the battery is hooked up correct , i tought maybee i was throwing too much voltage to it
|
02-19-2011, 02:09 PM | #5 |
Newbie Join Date: Dec 2004 Location: Danville, WV USA
Posts: 14
|
Try and use a smaller 6 cell battery to see if it still does it. If it does then you know its not battery related, if it don't then problem solved.
|
02-19-2011, 02:20 PM | #6 |
Quarry Creeper Join Date: Nov 2010 Location: Sarasota, Florida
Posts: 341
|
Do you have a spare battery that you can use to test? Maybe it's that battery your using, might be a short or something, not an expert but this exact situation happened on my buddies Slash 4x4, found out it was the battery.
|
02-19-2011, 02:23 PM | #7 |
Newbie Join Date: Feb 2011 Location: Prairiville
Posts: 27
|
I used a6 cell 1800 and it did the same thing ecept i have a little more run time before the problem occured!! Nothings getting hot but esc |
02-19-2011, 02:24 PM | #8 |
I wanna be Dave Join Date: Nov 2010 Location: 07456 N. NJ USofA
Posts: 8,314
|
This site.... http://www.axialracing.com/ftp/scx10/ shows 7.2VDC as stock (6 cell NiCD/NiMH). I highly doubt the additional cell is an issue though. Did you build the rig is is it a RTR? |
02-19-2011, 02:31 PM | #9 |
Newbie Join Date: Feb 2011 Location: Prairiville
Posts: 27
|
It was a ready to run kit its only two days old, it did great until the end of the day the problem started to occur
|
02-19-2011, 02:31 PM | #10 |
Pebble Pounder Join Date: Nov 2009 Location: Kingsport, TN
Posts: 122
|
On my TR, the esc got hot during the first pack of batteries ran through the truck. It just kept doing it, so I upgraded.
|
02-19-2011, 02:34 PM | #11 |
Newbie Join Date: Feb 2011 Location: Prairiville
Posts: 27
|
What dd u upgrade to??
|
02-19-2011, 02:36 PM | #12 |
Pebble Pounder Join Date: Nov 2009 Location: Kingsport, TN
Posts: 122
|
A traxxas XL5 waterproof esc
|
02-19-2011, 02:37 PM | #13 |
Newbie Join Date: Feb 2011 Location: Prairiville
Posts: 27
|
Another thing i noticed was it has tons more powe in reverse
|
02-19-2011, 02:41 PM | #14 |
Scale Detail Engineering Join Date: Apr 2010 Location: Turtle Island
Posts: 5,573
|
I would write Axial and they may replace the esc. Also, before you buy another esc like the xl5, decide what kind of driving you want to do. Will you need a drag brake? Will you ever run a brushless motor? Will you ever want to run lipo batteries? It would suck to buy a new esc based on someones recommendation to find out it doesn't fit the bill for your truck. |
02-19-2011, 02:41 PM | #15 |
Newbie Join Date: Feb 2011 Location: Prairiville
Posts: 27
|
It did it with 3 different batts lol i think imma just wing it and replace the esc
|
02-19-2011, 02:42 PM | #16 |
Scale Detail Engineering Join Date: Apr 2010 Location: Turtle Island
Posts: 5,573
|
Is your motor hooked up right? It sorta sounds like you got some wires crossed somewhere. |
02-19-2011, 02:43 PM | #17 |
Pebble Pounder Join Date: Nov 2009 Location: Kingsport, TN
Posts: 122
| |
02-19-2011, 02:48 PM | #18 |
Newbie Join Date: Feb 2011 Location: Prairiville
Posts: 27
|
Well yes i need a brake But im happy with the motor that is in the truck me and a bunch of friends built a huge track in my yard. It handles everything the way it is just want to fix whats broke...
|
02-19-2011, 02:57 PM | #19 |
Scale Detail Engineering Join Date: Apr 2010 Location: Turtle Island
Posts: 5,573
|
No, not a brake. The xl5 has a brake but not a "drag brake". If your going to bash/trail run most traxxas ESCs will work for you but if you want to ever crawl with it, you may want to research other options. |
02-19-2011, 03:03 PM | #20 |
Newbie Join Date: Feb 2011 Location: Prairiville
Posts: 27
|
I do crawl with it also! What would be a good esc for a 27 turn motor?
|
| |