Trump's BA Axial Jeep G6 build with a twist.

[Trump1]

It's a roller.

I filed the inside of the skid plate about 1.5mm. Now the Dig shifter clears the inside of the skid plate and shifts smoothly. Also, installed the servo holder, panhard and steering links. And of course the tires too. I'll install the knuckle weights later.











Last picture. A better look at the GearHead 1.9 12-Pack EZ-Loc Wheels.



I hope to get a lot more done tomorrow. It's suppose to be 85°, sunny and very warm. My kind of weather which means after I get a bunch of work done. I can have one or two celebratory brews. Yes!

To be continued ...

[blumaro]

Wheels and tires look sharp!

[fr8cture]

Haha we basically have the same setup except I got the gear head trail kings.

Sent from my VS980 4G using Tapatalk

[Trump1]

Originally Posted by blumaro

Wheels and tires look sharp!

Thank you for the compliment and for commenting.

Originally Posted by fr8cture

Haha we basically have the same setup except I got the gear head trail kings.

Sent from my VS980 4G using Tapatalk

Thank you for commenting.

I was also considering the Trail Kings. Do you have a build thread?

[fr8cture]

Originally Posted by Trump1

Thank you for the compliment and for commenting.



Thank you for commenting.

I was also considering the Trail Kings. Do you have a build thread?

No I don't have one.

Sent from my VS980 4G using Tapatalk

[billj]

Looks great Trump Makes me want to wash the mud off mine, and powdercoat everything

[Trump1]

Originally Posted by fr8cture

No I don't have one.

Sent from my VS980 4G using Tapatalk

Remember to post a photo in the SCX10 picture thread so we can see it.

Originally Posted by billj

Looks great Trump Makes me want to wash the mud off mine, and powdercoat everything

Thank you. Check this one out.

[billj]

Originally Posted by Trump1

Thank you. Check this one out.

Thats just crazy. Too pretty to crawl with

[Trump1]

Originally Posted by billj

Thats just crazy. Too pretty to crawl with

Thank you.

The first scratch is the hardest. Especially with the my first scaler, Toyota Hilux.

[Trump1]

I got a lot of building done last Saturday. I started the day early setting up my rickety workspace. I stated by trimming the body.

Here's a couple of pictures.








The body is basically done. I might need a little smoothing out here and there. And speaking about bodies, the prettey USPS carrier delivered a package. The VP front bumper CMS mount came in just in time.



I had a minor issue with the CMS front bumper mount. The holes didn't align up correctly which prevented the screw from going straight into the CMS front bumper . No need to panic. I took my Dremel and trimmed just a tad to make the hole a little wider.






Once the trimming was complete the holes lined up perfectly and the screw went straight in.




Moving along, I have noticed that some people like to lower the G6 body. I like just that way it sits, kind of high. So when It came down to installing the rear bumper, I had to make some custom brackets to raise the bumper a bit.



One more photo of the rear bumper and where I would like to be.






So here's my template for my rear bumper brackets.



Here's how it looks with the brackets installed.




To be continued ...

[Ty@Tekin]

Looking sharp! Going to be a really nice rig.

[Trump1]

Originally Posted by Ty@Tekin

Looking sharp! Going to be a really nice rig.

Thank you!

[T I N Y]

I used the same CMS/bumper mount..I really like mine ...NO Bump steer at all. Ya can't beat it...CMS and a four link....

[Trump1]

Originally Posted by T I N Y

I used the same CMS/bumper mount..I really like mine ...NO Bump steer at all. Ya can't beat it...CMS and a four link....

Thank you for your comments. I noticed you also used the same CMS/front bumper mount. I'm also going to use the VP 3 link conversion for Currie axles. Hopefully it works out as good as a four link setup.

[Robs07junk]

Thats A Clean Looking Build !

[fr8cture]

Looks great, just got my dig today and I'm having a problem with the rear driveshaft, have you tried putting your driveshafts on?

[Trump1]

Originally Posted by Robs07junk

Thats A Clean Looking Build !

Thank you.

Originally Posted by fr8cture

Looks great, just got my dig today and I'm having a problem with the rear driveshaft, have you tried putting your driveshafts on?

Thank you. I have not installed my driveshafts yet. What problem are you having with the resr driveshaft? I believe the driveshaft needs to be trimmed. Check twice and trim a little by little. Let me know how it works out.

[Trump1]

I got the front bumper brackets done tonight.







I hope to get a lot done this Saturday.

[Trump1]

I came up with a couple of alternatives for a front bumper. This bumper might be a little to wide. I would have to trim it so it's narrower.






This bumper sticks out further.







To be continued ...

[Hotrodvw]

I like the second one.