axial scx10 dingo So i have just ordered the Tekin 35T pro handwound motor combo and was just wondering what the top speed would be, everything on my Dingo is stock. And also if i were to put lights on it, what would i need. Thanks! |
Re: axial scx10 dingo The top speed depends on a couple different things like what you're gearing is going to be as well as what type of battery you are going to run. Is the battery a nimh or lipo battery? Either way unless you run a 3 or 4 cell lipo the 35 turn will be about as fast as a brisk walking pace. |
Re: axial scx10 dingo what about a 2 cell lipo?? |
Re: axial scx10 dingo 2 cell lipo = brisk walk 3 cell lipo = jog 4 cell lipo = fast jog at least that'sthe eexperience with my tekin 35 turn. And I run it on all three of those batteries. It is a great choice for a scaler as it is not so quick that the truck feels snappy when trying to crawl. |
Re: axial scx10 dingo What tooth spur gear and pinion are you using? |
Re: axial scx10 dingo i have everything stock, 20-87, for my tekin FXR do i need a bec when using a duratrax 2S lipo and Hitec HS-7955TG?? |
Re: axial scx10 dingo 4s "thumbsup" |
Re: axial scx10 dingo Quote:
|
Re: axial scx10 dingo Quote:
|
Re: axial scx10 dingo What bec should i use? |
castle creation Sent from my SCH-S738C using Tapatalk |
Re: axial scx10 dingo and how would i run lights on my dingo? |
You can run lights connected to the 3rd channel output of your receiver or bind plug. Or you can get those LED light controllers where they connect to both Ch1 and ch2 of your receiver and it activates left and turn signals when you turn left or right and brake lights come on when you hit reverse or brakes. And usually high beams when full throttle Sent from my iPad using Tapatalk - now Free |
All times are GMT -6. The time now is 05:11 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com