Go Back   RCCrawler Forums > Scale Rigs Brand Specific Tech > Axial Brand Scale Rock Crawlers > Axial SCX-10
Loading

Notices

Thread: Steering help

Reply
 
LinkBack Thread Tools Display Modes
Old 01-16-2014, 10:56 PM   #1
Rock Stacker
 
Join Date: Sep 2013
Location: Vancouver
Posts: 49
Default Steering help

When I turn right I can go till the knuckle hits the c-hub and beyond. But when I turn left the servo stops before it hits the c-hub. Tried adjusting the end points, so going right it stops where it should. But still can't get everything out of it, going left. Not sure what to do at this point. I'm running a savox SW-0231mg servo. Any input helps.



Airdet is offline   Reply With Quote
Sponsored Links
Old 01-16-2014, 11:01 PM   #2
Rock Crawler
 
Join Date: Aug 2011
Location: south shore Ma
Posts: 803
Default

When the truck is powered off can you manually move the servo horn to full lock on both sides?
Jcplante is offline   Reply With Quote
Old 01-17-2014, 12:09 AM   #3
I wanna be Dave
 
Join Date: Sep 2006
Location: Anchorage, Alaska
Posts: 3,099
Default Re: Steering help

often the servo is not centered properly on it's mount.

try loosening the servo screws...
and attempt to shift the servo L or R... in the direction
that will be most neutral (centered) to your endpoint adjustment capability.
re-tighten and test again.

* remember to adjust your TX's servo trim to center before adjusting the servo.

Last edited by TacoCrawler; 01-17-2014 at 12:15 AM.
TacoCrawler is offline   Reply With Quote
Old 01-17-2014, 12:57 AM   #4
Pebble Pounder
 
Join Date: Jan 2014
Location: Adelaide
Posts: 114
Default Re: Steering help

also you can unscrew and remove the servo horn before you centre the servo then straighten your wheels and re-attach the horn!
pickled is offline   Reply With Quote
Old 01-17-2014, 07:27 AM   #5
Rock Stacker
 
Join Date: Sep 2013
Location: Vancouver
Posts: 49
Default Re: Steering help

Thx guys I'll try those things once I get home.
Airdet is offline   Reply With Quote
Old 01-17-2014, 10:41 PM   #6
Rock Stacker
 
Join Date: Sep 2013
Location: Vancouver
Posts: 49
Default Re: Steering help

All fixed. Took the horn off, turned on the truck, let the servo center itself. Then reattached the horn. Full steering in both directions
Airdet is offline   Reply With Quote
Reply



Steering help - Similar Threads
Thread Thread Starter Forum Replies Last Post
Idea for scaler steering... Need ideas for building a steering box. JavelinSST390 General Scale Talk 25 05-14-2015 02:32 PM
new steering on the new PRO/ OTA steering mod axialjeepster AxialJeepster Losi Mini-Rock Crawler 4 10-14-2012 01:03 AM
inside tyre touches steering knuckle / steering linkage murky123 Axial SCX-10 4 10-06-2010 04:46 PM
Hot Racing Steering knuckles - more steering than the original plastic ones? Tomy Axial AX-10 Scorpion 1 11-16-2008 11:26 AM
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 03:06 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com