| |
02-03-2014, 06:40 PM
| #1 |
| Newbie Join Date: Dec 2013 Location: Fort Saint John
Posts: 44
|  about reciever's
i got my new scx10 kit, i got all my electronics. and on my reciever there is 3 channels: ch1: steering ch2:esc ch3: aux, i have a cc bec but there is another slot called batt, anybody know what it is for???? could i have the cc bec in that slot? thanks
|
|  |
| Sponsored Links | |
| | |
|
02-03-2014, 07:36 PM
| #2 |
| Quarry Creeper Join Date: Nov 2013 Location: Erie
Posts: 208
|  Re: about reciever's
The CC bec can go into any slot if running into the rx, execpt the ch 1 or 2(of course). If you put it into aux or battery, the rx will see the voltage through the bec. Just remember to cut the red wire from the esc...
|
|
| |
|
02-03-2014, 08:16 PM
| #3 |
| I wanna be Dave Join Date: Jan 2009 Location: New Port Richey, FL.
Posts: 2,545
| Re: about reciever's
Don't cut the wire from the esc otherwise you won't be able to program it.
|
|
| |
|
02-03-2014, 08:18 PM
| #4 |
| I wanna be Dave  Join Date: Feb 2013 Location: NW Indiana
Posts: 3,196
| Re: about reciever's
yup, just remove it from the connector and tape it up
|
|
| |
|
02-03-2014, 09:57 PM
| #5 |
| Newbie Join Date: Dec 2013 Location: Fort Saint John
Posts: 44
| Re: about reciever's
Yeah I just pulled the red wire out and put liquid electrical tape on it, I also put it on my esc solder posts so dirt wouldn't get stuck in there
|
|
| |
 |
| Tags |
| axial, batt, electronics, reciever, scx10 |
| Thread Tools | |
| Display Modes | |
| |
Linear Mode
