moter install on axial scx-10 (pic) Does this look like the right spacing with the moter pinion and spur gear ? http://imageshack.com/a/img30/4608/k0lc.jpg |
Re: moter install on axial scx-10 (pic) woops sorry for big picture lol im new to this |
Re: moter install on axial scx-10 (pic) Best method I have found (also noted somewhere on this site) is the paper method. Stick a piece of paper between the gears and mesh them together, lock your gears in place, and pull the piece of paper out. This leaves the paper thickness gap between the gears. This has worked for me and I am sure there a ton more methods to do it. |
Re: moter install on axial scx-10 (pic) That is too loose. |
Re: moter install on axial scx-10 (pic) Yeah, it's too loose. I tried the paper method once an the gears seemed too tight. So maybe not that tight, but yours are way too loose. |
Re: moter install on axial scx-10 (pic) that picture is hella zoomed in that gap is probally less than a mm kinda a bad picture |
Re: moter install on axial scx-10 (pic) Like said before, it looks loose. Best method I found is a piece of clear plastic bag that rc parts tend to come in, it makes a good shim to place between the pinion and spur to set the gap. |
Re: moter install on axial scx-10 (pic) Been too lazy for years to use paper, always found the tight spot and made just a tick of back lash since the mt nitro days. Not many spur gears are concentric, there will almost always be a tight spot. And yes, that pic looks loose. Its like you can see molecules its so zoomed :mrgreen: |
Re: moter install on axial scx-10 (pic) We will tell you the answer if you can spell "Moter" correctly. |
Re: moter install on axial scx-10 (pic) The best way I've found is to use newspaper. It's thinner than reg. paper. So it gives it that just right mesh. |
Re: moter install on axial scx-10 (pic) I use a magnifying glass to see the gears mesh and adjust. |
Re: moter install on axial scx-10 (pic) Quote:
So take that Mr. Split......lol |
Re: moter install on axial scx-10 (pic) Your laser was out of alignment...Nothing beats microscopic alignment. |
Re: moter install on axial scx-10 (pic) Quote:
|
Re: moter install on axial scx-10 (pic) Quote:
|
Re: moter install on axial scx-10 (pic) I was thinking of possibly using a very fine gauge sewing needle to set gear mesh. |
Re: moter install on axial scx-10 (pic) Quote:
|
Re: moter install on axial scx-10 (pic) I'm so behind the times |
... phased plasma rifle in 40 watt range... |
Re: moter install on axial scx-10 (pic) Quote:
|
All times are GMT -6. The time now is 05:01 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com