Copper Rubicon G6 Build

[DORM]

Here is my Axial SCX10 G6.

Some Modifications Include:

-Integy 45T
-King 90mm Shocks
-Hand Made Scale Items, including wheel wells.
-Diff Skid Plates
-Trans Skid Plate
-Hi Tec HS-645MG

The color is a Tamiya Copper

Update: Added more photos of Hand Made tools in the back and bottom of the Jeep.

[im gunna crawl]

Nice job. It looks killer. How did you do the rear bumper.

[DORM]

Originally Posted by im gunna crawl

Nice job. It looks killer. How did you do the rear bumper.

Its made out of 1/16 thick aluminum, cut on a shear to get a nice straight piece. Sanded outside bottom edges to get a slight angle.Shimmed it out about 4 to 5 mm away from body,fastened with 3x5mm bolts.

[Hirschowl]

Sweet skid plates on the axles! Did you make them yourself too? Can you post some better pics of the underside...

[DORM]

Originally Posted by Hirschowl

Sweet skid plates on the axles! Did you make them yourself too? Can you post some better pics of the underside...

Yes, I made them also. They're made out of aluminium; I made a cardboard template, got all the bends where they needed to be, traced it out on the aluminium, cut it out, sanded, filed, some more sanding, scotch-brighted, and installed. I posted a picture of the underside back up top on the original first post, if you can think of a better way to mount them let me know, I had to use a zip tie, but for now it works. Thanks for the positive comments!