custom panhard for t-rex 60 axles

[xjmachine]

i had been looking around for a pan hard because my scx10 needed it badly with the new t-rex 60 axles. when i would steer to the left the servo would push the frame up. and the steering was just really bad , would not align!!!!
so i had a couple of 3 ling pieces left over from this build so here we go!
i cut a small piece of an L bracket i had laying around and drilled it . and i also used a parts of leaf spring hangers, and bent that into an L for a frame mount and axle mount


this is where i bolted it to the chassis using the leaf hanger and L bracket



heres the finished product. it is even in line with the"draglink"
just like the real thing!.
works great!!!

[Undefined]

Awesome that it works..is it me or your angle of panhard and steering pretty steep..? What length shocks do you have?

Sent from a whiskey downer beer pounder's shop

[xjmachine]

it is a little steep.but that servo can handle it ;) im running 120mm shocks also the front suspension if fully stretched in that pic.