Go Back   RCCrawler Forums > Scale Rigs Brand Specific Tech > Axial Brand Scale Rock Crawlers > Axial SCX-10
Loading

Notices

Thread: CMS for scx10 dingo

Reply
 
LinkBack Thread Tools Display Modes
Old 06-01-2014, 06:41 PM   #1
Newbie
 
Join Date: Dec 2013
Location: Fort Saint John
Posts: 44
Default CMS for scx10 dingo

Hello
I have used the search button. I was just seeing if anybody knew about a good cms kit for the dingo?

Thanks


Sent from my iPhone using Tapatalk
Brehrocks is offline   Reply With Quote
Sponsored Links
Old 06-01-2014, 07:35 PM   #2
Newbie
 
Join Date: Aug 2013
Location: Calgary
Posts: 17
Default Re: CMS for scx10 dingo

Search scx cms there are lots. Vanquish makes a good one. It's a bit pricey tho
Redovermind is offline   Reply With Quote
Old 06-01-2014, 07:38 PM   #3
Newbie
 
Join Date: Dec 2013
Location: Fort Saint John
Posts: 44
Default

Does it work for dingo though?


Sent from my iPhone using Tapatalk
Brehrocks is offline   Reply With Quote
Old 06-01-2014, 07:40 PM   #4
Quarry Creeper
 
Join Date: Sep 2009
Location: Las Vegas
Posts: 476
Default Re: CMS for scx10 dingo

Yes all scx10's are the same essentially
MattTheGenus is offline   Reply With Quote
Old 06-01-2014, 07:41 PM   #5
Newbie
 
Join Date: Dec 2013
Location: Fort Saint John
Posts: 44
Default

Why does the rc4wd cms kit say "not suitable for dingo"?


Sent from my iPhone using Tapatalk
Brehrocks is offline   Reply With Quote
Old 06-02-2014, 08:31 PM   #6
Pebble Pounder
 
Join Date: May 2014
Location: Escatawpa
Posts: 130
Default

Get the vanquish one. I love mine. Easy installation


Sent from my iPhone using Tapatalk
Derek108 is offline   Reply With Quote
Old 06-02-2014, 08:34 PM   #7
Newbie
 
Join Date: Dec 2013
Location: Fort Saint John
Posts: 44
Default

That's installed on 11.4 wheelbase?


Sent from my iPhone using Tapatalk
Brehrocks is offline   Reply With Quote
Old 06-02-2014, 09:07 PM   #8
Pebble Pounder
 
Join Date: May 2014
Location: Escatawpa
Posts: 130
Default

12.3 wheelbase


Sent from my iPhone using Tapatalk
Derek108 is offline   Reply With Quote
Old 06-02-2014, 09:07 PM   #9
Newbie
 
Join Date: Dec 2013
Location: Fort Saint John
Posts: 44
Default

I need one for the 11.4 though


Sent from my iPhone using Tapatalk
Brehrocks is offline   Reply With Quote
Old 06-02-2014, 09:07 PM   #10
Pebble Pounder
 
Join Date: May 2014
Location: Escatawpa
Posts: 130
Default

It will install in the dingo


Sent from my iPhone using Tapatalk
Derek108 is offline   Reply With Quote
Old 06-02-2014, 09:08 PM   #11
Pebble Pounder
 
Join Date: May 2014
Location: Escatawpa
Posts: 130
Default

I wish I had a better pic to show u


Sent from my iPhone using Tapatalk
Derek108 is offline   Reply With Quote
Old 06-02-2014, 09:09 PM   #12
Pebble Pounder
 
Join Date: May 2014
Location: Escatawpa
Posts: 130
Default

If u still feel unsure just call them. They will answer all your questions.


Sent from my iPhone using Tapatalk
Derek108 is offline   Reply With Quote
Old 06-02-2014, 09:10 PM   #13
Newbie
 
Join Date: Dec 2013
Location: Fort Saint John
Posts: 44
Default

I wish I could know if anybody else had the vp cms installed on the dingo, I don't want to spend $100 on something that doesn't work


Sent from my iPhone using Tapatalk
Brehrocks is offline   Reply With Quote
Old 06-02-2014, 10:11 PM   #14
I wanna be Dave
 
Join Date: Aug 2004
Location: san jose
Posts: 2,061
Default Re: CMS for scx10 dingo

, I don't want to spend $100 on something that doesn't work


Sent from my iPhone using Tapatalk[/QUOTE]

Thats 125.96 with shipping
1beatjeep is offline   Reply With Quote
Old 06-03-2014, 12:09 AM   #15
Pebble Pounder
 
Join Date: Sep 2011
Location: Medford
Posts: 158
Default Re: CMS for scx10 dingo

My understanding is that since the cms kit come with an upper link to 3 link the front, it's the wrong lenght and that's why it doesn't work on the 11.3 dingos. That and where it mounts in the frame rails is further forward on the 12.3 honchos. I am running the rc4wd on my truck. I have dingo links in the rear and honcho up front so I have the proper geometry up front but I have the shorter wheel base that my chevy body needed.
Matts scx10 action!

Hope that helps
Matthewboerner is offline   Reply With Quote
Old 06-03-2014, 05:20 AM   #16
Rock Crawler
 
Join Date: Nov 2010
Location: the 'burgh'
Posts: 976
Default Re: CMS for scx10 dingo

The actuall CMS part of the kit will work fine, axle mount, chassis mount & panhard bar. The rest of the kit is useless for you because all the links are for 12.3 WB.

VP doesn't sell just the CMS part...yet.

Another option if you have the coin to drop is buy the kit, use the CMS portion, make your own upper link, sell off the rest of the Ti links in the FS section, some one will buy them. A crazy option but an option none the less.
gdb85 is offline   Reply With Quote
Old 06-03-2014, 05:49 AM   #17
RCC Addict
 
Join Date: Jun 2013
Location: Port Saint Lucie, Florida
Posts: 1,050
Default Re: CMS for scx10 dingo

If you can make your own links, why not get the Blue Monkey DIY kit?
DIY CMS with Panhard, Blue Monkey RC

It's under $80 for everything but the upper link which you'd need to make yourself, but the drag link and tie rod will fit either rig.

I'm running it and love it!
Richterat83 is offline   Reply With Quote
Old 06-04-2014, 09:31 PM   #18
Newbie
 
Join Date: Dec 2013
Location: Fort Saint John
Posts: 44
Default Re: CMS for scx10 dingo

Quote:
Originally Posted by Richterat83 View Post
If you can make your own links, why not get the Blue Monkey DIY kit?
DIY CMS with Panhard, Blue Monkey RC

It's under $80 for everything but the upper link which you'd need to make yourself, but the drag link and tie rod will fit either rig.

I'm running it and love it!

So what upper link are you talking about, did you do this to a dingo?
Brehrocks is offline   Reply With Quote
Old 06-05-2014, 11:52 AM   #19
Quarry Creeper
 
Join Date: Sep 2005
Location: Sandy, UT
Posts: 368
Default Re: CMS for scx10 dingo

I'm running the Hand Brothers kit on my Dingo. I don't have any pictures at the moment, but it works fine. I did have to clearance a frame crossmember for the upper link, and I think my panhard might even be bent a little to clear the frame on compression, but it does work very well. I can try to take some pictures tonight if I remember.

I realize the Hand Brothers isn't available anymore, but the RC4WD one is identical as far as I know, so it should work the same.
metalry101 is offline   Reply With Quote
Old 06-05-2014, 12:02 PM   #20
Newbie
 
Join Date: Dec 2013
Location: Fort Saint John
Posts: 44
Default

Why does the rc4wd cms say "not suitable for dingo" if it actually is?


Sent from my iPhone using Tapatalk
Brehrocks is offline   Reply With Quote
Reply



CMS for scx10 dingo - Similar Threads
Thread Thread Starter Forum Replies Last Post
VP SCX10 CMS Kit 05Fronty4x Axial SCX-10 19 08-07-2013 05:22 PM
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 12:13 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com