|
| LinkBack | Thread Tools | Display Modes |
06-30-2016, 11:42 AM | #1 |
~THE SCALE SHOP~ Join Date: Apr 2006 Location: KILLEEN TX
Posts: 10,056
| ~TSS~ SCX10 Brass Knuckles Yet another first of its kind original product from The Scale Shop. One piece scale brass knuckles for the original SCX10 axles. Adds weight down low and at the ends of the axle to keep your rig planted without adding rotational mass. Shown with Axial brand housings, C's, and CVDs. Features 4mm thick high steer zero ackerman arms with gussets and two mount holes for the ultimate in strength, steering, options, and clearance. Paint-able for scale looks. Extremely tight tolerances for zero slop. Designed to mimic full scale fabricated/welded knuckles. Shown with SSD brand D60 housings, C's, and CVDs. Help plant your rig and make it more stable by moving the weight outward with more leverage vs brass tubes, yet without the rotational mass of wheel weights. Clears just about any 1.9 wheel. SORRCA legal Weight: TSS Brass Knuckles- 1.565 oz each VP Knuckles- 0.3 oz each Last edited by STANG KILLA SS; 09-10-2017 at 08:16 AM. |
Sponsored Links | |
06-30-2016, 11:49 AM | #2 |
Rock Crawler Join Date: Dec 2013 Location: Sacramento
Posts: 702
| Re: ~TSS~ SCX10 Brass Knuckles
Wow! Those are a very nice looking, well thought out, much needed item! Nice job. The name is pretty awesome too. ;) Sent from my SM-N910V using Tapatalk |
06-30-2016, 12:01 PM | #3 |
~THE SCALE SHOP~ Join Date: Apr 2006 Location: KILLEEN TX
Posts: 10,056
| Re: ~TSS~ SCX10 Brass Knuckles
thank you very much! these have been a year in the making, and a huge investment for TSS. and of course a month before they are finished/released, axial releases the SCX2 |
06-30-2016, 12:24 PM | #4 |
I wanna be Dave Join Date: Feb 2009 Location: Detroit
Posts: 2,075
| Re: ~TSS~ SCX10 Brass Knuckles
time to make some for the scx 2! haha. no seriously. get on it. and maybe xr10 width beeftubes? I might be asking for a bit much.. |
06-30-2016, 12:30 PM | #5 | |
Rock Crawler Join Date: Dec 2013 Location: Sacramento
Posts: 702
| Re: ~TSS~ SCX10 Brass Knuckles Quote:
Sent from my SM-N910V using Tapatalk | |
06-30-2016, 12:41 PM | #6 |
~THE SCALE SHOP~ Join Date: Apr 2006 Location: KILLEEN TX
Posts: 10,056
| Re: ~TSS~ SCX10 Brass Knuckles
yes a SCX2 version is already in the works. with CADs begining next month.
|
06-30-2016, 12:46 PM | #7 |
I wanna be Dave Join Date: Feb 2009 Location: Detroit
Posts: 2,075
| Re: ~TSS~ SCX10 Brass Knuckles
saweeeeeet! would be a great add on for my.. well Ill leave that a secret. its not a scaler...
|
06-30-2016, 03:58 PM | #8 |
Rock Crawler Join Date: Dec 2009 Location: Suffolk
Posts: 838
| Re: ~TSS~ SCX10 Brass Knuckles
What paint did you use to do the pair that is painted and did it affect bearing fit? I'm very interested in a set but I am going to have to paint them for sure.
|
06-30-2016, 04:41 PM | #9 |
Rock Crawler Join Date: Dec 2013 Location: Norway
Posts: 689
| Re: ~TSS~ SCX10 Brass Knuckles
Cool design. Not first of its kind though. I have been running brass knuckles and chubs for about a year |
06-30-2016, 05:03 PM | #10 | |
~THE SCALE SHOP~ Join Date: Apr 2006 Location: KILLEEN TX
Posts: 10,056
| Re: ~TSS~ SCX10 Brass Knuckles Quote:
yes paint will need to be sanded out, bearing and "top hat" bushing tolerances are kept extremely tight. a slide press fit. ie they wont slide back out once installed. | |
06-30-2016, 05:06 PM | #11 |
RCC Addict Join Date: Aug 2005 Location: SoCal
Posts: 1,559
| Re: ~TSS~ SCX10 Brass Knuckles
If you paint them, I'd just mask off the bearing holes.
|
07-01-2016, 09:15 AM | #12 |
~THE SCALE SHOP~ Join Date: Apr 2006 Location: KILLEEN TX
Posts: 10,056
| Re: ~TSS~ SCX10 Brass Knuckles
did a little mockup showing the difference in balance between TSS Brass Knuckles and a brass tube. The knuckles do a great job of keeping your rig planted Left: TSS Brass Knuckle, Aluminum C Right: Brass Tube, Aluminum C and Knuckle Last edited by STANG KILLA SS; 09-10-2017 at 08:17 AM. |
07-01-2016, 09:21 AM | #13 |
Newbie Join Date: Jan 2014 Location: Ogden
Posts: 12
| Re: ~TSS~ SCX10 Brass Knuckles
These look awesome! I have been looking for brass knuckles for a while now. Any chance of also making wraith/ xr10 brass knuckles?
|
07-01-2016, 09:39 AM | #14 |
Rock Crawler Join Date: Dec 2013 Location: Norway
Posts: 689
| Re: ~TSS~ SCX10 Brass Knuckles
Dont know why the need of calling these first of its kind, since it's clearly have been done before. Here are some pics of my SCX10 and Ascender with both brass knuckles, chubs and lockouts. And these are a year old now. Cool it see a new design, but clearly not first. Even cooler would be first for the scx10 II, since there is a dire need for a smart way to add some low weight to that one. But it would be smart to offer both chubs and knuckles. Maybe even lockouts, since they are simpler to make. |
07-01-2016, 09:41 AM | #15 |
I wanna be Dave Join Date: May 2015 Location: Moving
Posts: 2,580
| Re: ~TSS~ SCX10 Brass Knuckles
Can't wait for the SCX10 II version. These look awesome Killa!
|
07-01-2016, 12:32 PM | #16 |
Quarry Creeper Join Date: Jun 2008 Location: San Antonio
Posts: 409
| Re: ~TSS~ SCX10 Brass Knuckles
chingaso's being thrown down! Oh wait...wrong kind of knuckles! Looks great Cory!
Last edited by SAL45; 07-01-2016 at 12:35 PM. |
07-01-2016, 12:38 PM | #17 |
~THE SCALE SHOP~ Join Date: Apr 2006 Location: KILLEEN TX
Posts: 10,056
| Re: ~TSS~ SCX10 Brass Knuckles
yes we will be doing a wraith version. and it says first SCALE brass knuckles. also was refering to them being available to the public in large quantities, im sure there are tons of one offs and custom small runs out there, but they are all for comp, not scale ;) |
07-03-2016, 03:24 PM | #18 |
I wanna be Dave Join Date: Dec 2006 Location: Where the sheep run scared.
Posts: 3,008
| Re: ~TSS~ SCX10 Brass Knuckles
You keep kickin ass my brother. Please make some lock outs after you kick out the wraith knuckles. I love a well balanced rigs. TSS for the WIN
|
07-03-2016, 03:48 PM | #19 |
RCC Addict Join Date: Dec 2006 Location: Flatwoods
Posts: 1,036
| Re: ~TSS~ SCX10 Brass Knuckles
Man I love those! Hopefully will be able to get a set of those in the near future. I was thinking about adding some beef patties to my fronts of my Cheapbolt, would much rather do non rotating weight.
|
07-03-2016, 04:45 PM | #20 |
I wanna be Dave Join Date: Oct 2007 Location: Castle Rock, WA
Posts: 8,785
| Re: ~TSS~ SCX10 Brass Knuckles
yup |
~TSS~ SCX10 Brass Knuckles - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
~TSS~ SCX10 Brass Knuckles | STANG KILLA SS | Axles, Trannys, T-case | 44 | 08-20-2017 09:18 AM |
chassis idea...brass knuckles? | gotajeep | Redcat Crawlers | 9 | 02-08-2013 01:02 PM |
| |