My first scaler..
 

Started out with the kit and some electronics I had laying around. Novak crawler esc terra claw 35t on 3s.. sawöx sc-1268sg cc-bec. Rc4wd steel stampede, rampage recovery bumper, warn winch,rock krawler 100mm prd shocks tough armor rock sliders. Vp light bar and mount. this is what it looks like so far. Will be updating as the build goes on. http://tapatalk.imageshack.com/v2/14...0c869413f8.jpghttp://tapatalk.imageshack.com/v2/14...8a8a19a73d.jpghttp://tapatalk.imageshack.com/v2/14...a87bf441a0.jpghttp://tapatalk.imageshack.com/v2/14...08ec016f72.jpghttp://tapatalk.imageshack.com/v2/14...d5aed48050.jpg .http://tapatalk.imageshack.com/v2/14...8d458ed155.jpghttp://tapatalk.imageshack.com/v2/14...16ce2c7ab2.jpghttp://tapatalk.imageshack.com/v2/14...12cd69fd64.jpghttp://tapatalk.imageshack.com/v2/14...eb922a02ed.jpg

My first scaler..
 

Time for some water proofing :)
The servo is water resistant but not water proof so let's try fix that with plastidip may not be 100% but it will do for now.. And some lights In the new bumper.http://tapatalk.imageshack.com/v2/14...0d0e307e20.jpg fog lights and rock lights done water proofing almost done waiting for my controller to the winch then I can complete that ..http://tapatalk.imageshack.com/v2/14...2eba6cb4ff.jpghttp://tapatalk.imageshack.com/v2/14...edcf87c49e.jpg

Re: My first scaler..
 

Thanks. Yes I like it.. Just have too mod the winch mount so I can get a better approach angle (sticks out a bit too much when the winch is mounted)

My first scaler..
 

Got some stuffs today so let's mount it! :)
http://tapatalk.imageshack.com/v2/14...637e857a83.jpg
New bumper goes on first.. Must say this bumper was really nice! Good quality! http://tapatalk.imageshack.com/v2/14...a4acd23c05.jpghttp://tapatalk.imageshack.com/v2/14...7515c9bf20.jpg

Re: My first scaler..
 

Hd locker and overdrive gear..http://tapatalk.imageshack.com/v2/14...8e893beb4c.jpg

Re: My first scaler..
 

What bumpers do you have on there?

Re: My first scaler..
 

The rear I mean

Re: My first scaler..
 

Re: My first scaler..
 

It is rc rock armor. really nice quality and scale look.

Re: My first scaler..
 

Cool. Thanks!

Re: My first scaler..
 

Out testing the new upgrades liked it until my motor burned up ;) hope the new one gets here soon!!

My first scaler..
 

https://vimeo.com/105698776
Got my winch controller today running the winch from rx. maybe change that later on to get some more power if that's needed..

Re: My first scaler..
 

Out running today at local comp.. First comp for me. Ooh got some more stuff mounted to, rc4wd alu c-hubs and knuckles.http://tapatalk.imageshack.com/v2/14...aa567d8a94.jpghttp://tapatalk.imageshack.com/v2/14...26549fbff0.jpghttp://tapatalk.imageshack.com/v2/14...328c062db4.jpg

Re: My first scaler..
 

Hey I was wondering after you hook up your bec. Did your your lights and servo come on before you turned on your esc?

Re: My first scaler..
 

Yes it does.. I don't have any on off switch for the esc so its all on after you plug in the batt..

Re: My first scaler..
 

Update.. My beef tubes came in today also mounted and tested the new motor (HH PRO 35t) still waiting in the new esc also from HH. Got the car striped down to a roller to clean it and change the electronics.http://tapatalk.imageshack.com/v2/14...78d665ddbc.jpghttp://tapatalk.imageshack.com/v2/14...f8468a0e6f.jpghttp://tapatalk.imageshack.com/v2/14...c279441a72.jpg

Re: My first scaler..
 

Looks like ya got a nice rig goin! The iroks do great for me how are ya liking them? I got mine stuffed with ci 4.50(med front/firm rear)lil novas & they work perfect!!!

My first scaler..
 

Yes I like the rig so far..;) I'm still experimenting with the foams stock in rear and without in the front but I will probably get some ci for them.. Thanks!

My first scaler..
 

Got my new esc today.. installed it and did a battery relocation http://tapatalk.imageshack.com/v2/14...68309ed8fa.jpghttp://tapatalk.imageshack.com/v2/14...b617a9a9e6.jpg

Re: My first scaler..
 

Well got some new stuffs today. CI foams, wheels and alu shock mounts. Hopefully I'm getting some products from scalerfab in the mail soon.. Have been waiting for them a while now... http://tapatalk.imageshack.com/v2/14...14bd58ea13.jpghttp://tapatalk.imageshack.com/v2/14...cc27dab9a3.jpghttp://tapatalk.imageshack.com/v2/14...dcb1cbd08e.jpg
Started to make some cage changes. Got some sanding and painting to do. Then I can figure out if I like it or not..
http://tapatalk.imageshack.com/v2/14...fff2e3d125.jpg