C-Hub Carrier Screws Fall Out
 

Hey guys!

I have a problem with my C-Hub Carrier screws always falling out during runs. I need a way to stop it before I run out of hardware :lmao: . I was thinking of using super glue or something. Would that work?

Re: C-Hub Carrier Screws Fall Out
 

I have the stock plastic c-hub carriers so I don't think loctite would work. Or would it?

Re: C-Hub Carrier Screws Fall Out
 

Instead of using the stock self tapping screws change to M3 machine screws of the same length. The finer thread pitch won't back out as easily.

The other thing to do is to put a drop of CA glue on the screw before you put it in. Think of it as loctite for plastic.

Re: C-Hub Carrier Screws Fall Out
 

I wouldn't use superglue, when you want to remove them it maybe be difficult. I use blue loctite on the c hubs of my wraith (still plastic)

Re: C-Hub Carrier Screws Fall Out
 

Thanks I'll try that.

Re: C-Hub Carrier Screws Fall Out
 

What type of CA glue consistency (thin, medium or high)?

Re: C-Hub Carrier Screws Fall Out
 

Just order a set if beef tubes that way you'll have something solid to screw in to.

Re: C-Hub Carrier Screws Fall Out
 

Super glue and 3mm thread bolts are what you need. Super glue just reinforces the threads and helps the bolts stay tight. They will come right out nice and easy when you need them to.

Re: C-Hub Carrier Screws Fall Out
 

THIS. "thumbsup"

Any will work, but thin or medium is all I buy. Losi was my favorite, now this AKA is my favorite,
AKA PREMIUM TIRE GLUE

Re: C-Hub Carrier Screws Fall Out
 

Beef Tubes + Aluminum Chubs + Loctite = "thumbsup"

You'll end up there eventually anyway so just skip to the end now.

Re: C-Hub Carrier Screws Fall Out
 

Thanks guys for all the help!