Wheel spacers

[SerpentCT4S]

I'm looking into getting some wheel spacers. I think they would help in making the truck more stable, plus the truck would look better with them I think.

What do you recommend for a stock scx10? I was looking at these:
Mini 12mm Wheel Widener (4)

[Norton]

I would recommend these: Junfac Wheel Widener (Offset: +13mm)

If you look around, you can find them.

[sotvotkong]

all depends how wide you want to go. the rc4wd mini wideners are ok, ive got a set. but on scx10 axles its almost like running wraith axles at that point. if you just need like 1-2 mm then use different hex's maybe. junfacs are good just a bit wider then the ones you linked.

[lemonhead]

Originally Posted by Norton

I would recommend these: Junfac Wheel Widener (Offset: +13mm)

If you look around, you can find them.

go with those, have them on 2 of my rigs it will make your rig more stable.

[SerpentCT4S]

Where can I get them?

[SerpentCT4S]

I see AMain has the ones I posted.

[wraithfreak]

I have the Junfac and are very happy with them. I would suggest putting a drop of non- permanent Loc-Tight on the long bolts.

[MountainStorm]

Junfac +13mm is my advice. Got mine here: Gmade 2 2 inches Duralumin Wheel Widner Offset 13mm 1 10 RC Car Off Road J51032 | eBay

[SerpentCT4S]

Are GMade a knock off?

I'd prefer something in the USA. Got a link to that?

[Norton]

Gmade and Junfac are the same company.

[lemonhead]

Originally Posted by SerpentCT4S

Where can I get them?

Rpp is out of stock , give TCS a try says they have em in stock

[FATALLYILL]

I run the junfac spacers myself with 1.9 wheels and 1.9 bfg krawlers. IMO with wideners you need taller tires as it will actually be more difficult to go over obstacles. that's just what I've experienced.

[SerpentCT4S]

Originally Posted by lemonhead

Rpp is out of stock , give TCS a try says they have em in stock

Thanks, just ordered them!

[SerpentCT4S]

Just got my Junfac spacers.

I'm looking at them and I'm not sure how to install them. Does anyone have a picture of instructions or a picture of them mounted?

Thanks.

[sic1to]

Remove 12mm hex leave pin slide on the extenders install wheel & use the long nut that came with them...




Sorry bout pics shitty 4siphone

[SerpentCT4S]

Thanks, just got them on!

[summerof95]

For a more subtle effect, Traxxas makes some 8mm wide hexes.

Set of 4 runs about $7 (two of item #3654).

[HDMM]

Originally Posted by summerof95

For a more subtle effect, Traxxas makes some 8mm wide hexes.

Set of 4 runs about $7 (two of item #3654).

I run the 8mm wide hexes on a few rigs as well, Pro-Line also makes them ( part# 6097-00 ). The stock hexes are about 4.5mm so by adding 8mm hexes it only gives you about a 7mm wider width on your rig. This does work pretty good on a stock rig though, also the wider hexes are good if you ever plan to run VP steering knuckles, since they tend to have clearance issues with some wheels.

[im gunna crawl]

Who makes 8 mm wide hexes?

[Meatwad]

Originally Posted by im gunna crawl

Who makes 8 mm wide hexes?

Originally Posted by summerof95

For a more subtle effect, Traxxas makes some 8mm wide hexes.

Set of 4 runs about $7 (two of item #3654).