Go Back   RCCrawler Forums > Scale Rigs Brand Specific Tech > Axial Brand Scale Rock Crawlers > Axial SCX-10
Loading

Notices

Thread: Vanquish Links

Reply
 
LinkBack Thread Tools Display Modes
Old 02-14-2015, 11:17 AM   #1
Newbie
 
Join Date: Jul 2012
Location: L.A.
Posts: 9
Default Vanquish Links

Will the 12.3 link kit ( VSP06970 ) fit/work on the SCX10 DEADBOLT without doing any mods ... the SCX10 DB has the 12 inch WB , is the .3 added length a problem any help or suggestions are appreciated
odogfish is offline   Reply With Quote
Sponsored Links
Old 02-14-2015, 01:47 PM   #2
I joined the Band!
 
Join Date: Dec 2014
Location: Earth
Posts: 1,188
Default Re: Vanquish Links

With most kits that change the wheelbase your tires will no longer be centered under the fenders of your current body and you may have to relocate the upper shock mount (front, rear or both) but that's about all. Not sure if there's anything special or more complicated with the Vanquish kit or not.

Why not use the 12" wheelbase Vanquish kit? Vanquish #VPS06975.

Axial SCX G6 Titanium 8pc. Link Kit 12.00 WB - Vanquish Products

Vanquish Axial SCX G6 Titanium 8pc. Link Kit 12.00 inch wheelbase VPS06975
Eric0424 is offline   Reply With Quote
Old 02-14-2015, 01:51 PM   #3
Pebble Pounder
 
Join Date: Dec 2014
Location: Ontario Canada
Posts: 145
Default Re: Vanquish Links

It will work fine. I had that kit on my G6 and tested it with the Deadbolt body and you can barely tell the difference. No issues with tire/body contact or anything.
I would say, think about the type of body you may want to replace the deadbolt with at some point and buy the links that match that body. That way you don't have to buy new links. Since the deadbolt will work for either 12 or 12.3 but other bodies are very specific its better to buy the kit for your future body.
Pavmentsurfer is offline   Reply With Quote
Old 02-14-2015, 07:03 PM   #4
Pebble Pounder
 
Join Date: Jun 2009
Location: prairie du sac
Posts: 108
Default Re: Vanquish Links

If you're going to spend big money on ti links, consider getting the shorter links. Then if you want to change up to a longer wheel base in the future, all you have to do is buy the traxxas jato rod ends. They're longer than the revo ends. Just trim them to get the length you want. Or mix and match, revo on one end of the rod, jato on the other. I don't know exactly how much longer the jato ends are but you could stretch out from 12" to probably almost 13" by adding just the jato ends I would imagine. Just a thought. I'm sticking close to 12" myself.
460bronco is offline   Reply With Quote
Old 02-14-2015, 07:40 PM   #5
Newbie
 
Join Date: Jul 2012
Location: L.A.
Posts: 9
Default Re: Vanquish Links

I like the DB body it stays , I'm not opposed to the 12in. kit actually I'd like to keep the WB as is but from the picture of the VPS06975 link kit it looks like theirs not a Y link with it for the front , appears to be a four link but the 4link brace doesn't come with it ? , or am I missing something

thanks
odogfish is offline   Reply With Quote
Old 02-14-2015, 08:29 PM   #6
I joined the Band!
 
Join Date: Dec 2014
Location: Earth
Posts: 1,188
Default Re: Vanquish Links

The front 4-link mount may be in with the spare parts if your Deadbolt included the spares. If not, the 4-link mount is available on Axial parts tree AX80043 or as an aftermarket component. Although I can't find that specific part included with the 12.3" kit on their site.

Not sure why they don't include the 4-lnk mount in the 12" kits.
Eric0424 is offline   Reply With Quote
Old 02-15-2015, 08:29 AM   #7
Pebble Pounder
 
Join Date: Dec 2014
Location: Ontario Canada
Posts: 145
Default Re: Vanquish Links

My 12.3 inch kit included the front 4 link mount. But ALL the parts to convert the deadbolt to a 4 link front WERE included in the spare parts bag that came with the deadbolt (other than fasteners... you just need 2 small screws and many will work), its all there.

I just finished putting the 12.3 inch kit on my deadbolt, ill post a picture shortly so you guys can see what it looks like. I also used the Vanquish CMS and panhard mount and had to build my own panhard link. Im not %100 happy with how it works. But it does work.
Pavmentsurfer is offline   Reply With Quote
Reply



Vanquish Links - Similar Threads
Thread Thread Starter Forum Replies Last Post
Vanquish links! WhatsInYourHead Axial SCX-10 4 02-05-2015 04:06 PM
Vanquish links help. Agent 13 Axial SCX-10 8 08-25-2013 02:00 PM
Vanquish Ti links BIGNASTY Axial Wraith 2 11-30-2011 09:27 PM
Vanquish Links? C_Money Axial AX-10 Scorpion 2 01-16-2010 11:26 PM
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 03:46 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com